Inderes’ Disclaimer can be found here. Detailed information about each share actively monitored by Inderes is available on the company-specific pages on Inderes’ website. © Inderes Oyj. All rights reserved.
Read transcripts of webcasts and audiocasts
Read transcripts of webcasts and audiocasts
Disclaimer: This is a machine-generated transcript and may contain inaccuracies.
Hello, everyone, and welcome to the presentation of the Addnode Group's Q1 interim report for 2026. I'm the CEO Johan Andersson of Addnode Group. And with me, I also have Kristina Elfström Mackintosh, our CFO, Addnode Group. So today we will give you an insight into Addnode Group. Talk about our divisions, a little bit about acquisitions, touch upon AI, and we will end with a Q&A. Q1 was a quarter where we improved earnings and saw stronger cash flow. We delivered solid earnings growth. Companies acquired in 2025 performed well and, combined with cost savings, contributed to our favorable earnings performance. EBITDA was up 26% to 274 million, and EBITDA margin increased to 17.9% from 14.9%. Earnings per share increased by 24%. Cash flow from operating activities increased to 363 million, compared to 203 million in the previous quarter of 2025. And we can also see an acquisition. Technia acquired a customer contract base in Germany. We also continue to lay the foundation for future earnings growth by continuing to implement AI, develop new offerings, and optimize organizations. If you look at it from a longer perspective, as shown in the graph to the right, we can see that from 2025 to the rolling 12 months ending this quarter, EBITDA has doubled from 461 million to 960 million. I will later walk you through Q1 by divisions, but I would like to hand over to Kristina, our CFO. Thank you.
I will take you through the net sales development from Q1 last year to Q1 this year. And we can see that net sales increased by 5% to 1,531 million SEK. And the growth is mainly supported by acquisitions. From an organic perspective, the currency-adjusted organic growth amounted to -6%, and the negative organic growth was attributable mainly to the Design and PLM divisions. In the Design division, Symetri saw a slower market in Europe and the U.S., and a lower share of three-year contracts compared to the same period last year. And as we have previously communicated, 2025, last year was one of the years with a high volume of three-year contracts being renewed. Also, the market situation in Germany, where PLM is operating, remains challenging. Looking at the acquisitions, they contributed as planned. And, with a contribution of 223 million SEK, the integration of the new acquisitions is progressing well, and the acquired businesses delivered in line with expectations. But currency movements had a significant impact during the quarter, mainly due to the weaker US dollar. The US dollar had a negative impact of -61 million SEK in the quarter. And that impact is mainly attributable to the Design division, where a majority of the US dollar-denominated business resides. We will now look at the cash situation and cash flow. In Q1 2026, cash flow from operating activities improved by 79% to 363 million SEK, compared to 203 million SEK. Last year, this increase was mainly attributable to stronger earnings and positive changes in working capital. This graph, which we have shown in past meetings, shows the Free Cash Flow in relation to EBIT for the rolling 12 months, quarter by quarter. And you can see in the pink line, we have had a cash conversion rate of about 70%, up to the time when Autodesk contracts allowed us to obtain the three year payments up front. That changed in 2023. And now we are getting the payments yearly in advance. And you can also see the graph. The graph now reflects an upward trend in the most recent quarters, and in line with what we have previously communicated and also historically observed, the working capital effect and the cash conversion tends to vary between quarters. And we expect such volatility to persist going forward. And we will now also look at the financial position. And as of March 2026, the net debt including leasing amounted to 2.2 billion. It was also supported by around 900 million SEK in cash balance, and the leverage amounted to 2.1 times as a result of the recent acquisitions activity; from the facilities we currently have, we have about 800 million SEK in available unutilised capacity. And during 2025 and now in Q1 2026, we have completed 11 acquisitions which have resulted in a temporary increase in the leverage. We will also look at the return on capital employed on the next slide. The return on capital employed amounted to 14.6% as of March 2026. The numerous large acquisitions that we completed last year temporarily impacted the reported return on capital. And while the results of the acquired companies are included only from the time of acquisition, that, if you remember, was when SolidCAD came in by the end of October last year. FF Solutions in Brazil in the beginning of August and Genus in Norway from the beginning of July. The full amount of the capital employed is added immediately at the point of acquisition. This timing effect creates a short term dilution of return on capital employed, which you can see in this graph. And now we're going to go into more details about the divisions, so I'll hand over. Back to you Johan.
Thank you Kristina. Some of you may know we are organized in three divisions. We call them Design Management, Product Lifecycle Management, and Process Management. I'm going to walk you through the development in Q1 for each of our three divisions. Before we do that, you can see that the two bigger divisions. If you look at the share of EBITDA, you will find Process Management and Design Management, and then we also have Product Lifecycle Management. So let's start with Design Management. And before we do that, I just want to remind you that as of January 1st, 2026, Tribia has been transferred from Design Management Division to the Process Management Division. All the comparative figures you will see today have been restated to reflect the scenario in which Tribia has already been transferred in 2025. So, the numbers are like-for-like, and there is no effect from the transfer in the numbers we see here. With that as a start, we can see that the Design Management division's net sales increased by 7% to 659 million. As Christina mentioned earlier, the weaker US dollar had a negative impact, and adjusted for currency effect, organic growth was -12% in the division. However, EBITDA increased by 7% to 158 million and the EBITDA margin increased to 24%. The acquisitions in Canada and Brazil have developed according to plan and contributed to improved net sales and earnings in Brazil. Growth was driven by continued investment in infrastructure in Canada. We can see that customers continue to show renewed confidence in us as their partner. Looking at Europe, we can see that net sales in Europe and the US were negatively impacted by a few things. We had a lower volume of Autodesk subscriptions that were up for renewal, and out of those that were up for renewal, we can see that more customers than historically have chosen a one-year subscription over a three-year one when they renew, and we can see that trend is continuing. So that means that there are still customers with us. But, regarding what we explained earlier, that as we recognize revenue, we report the full value of the contract at the time of the sale. So if we sell a three year contract, we boost the sales. And if we sell a one-year contract, compared to having sold a three-year one previously, it has a negative effect in that quarter. But it means that we are still having the same underlying business value. So that's important to have with you. We can also see that there are some geopolitical changes in the world, and we have some effect also from the market. And that has probably also affected the choices of the customers, because you could imagine that in a more uncertain world, you're probably going more for a one-year compared to a three-year if you have the option. But the number of customers has increased in Europe and the US during this period. So, we also have service operations globally in the division, which are more focused on facility management solutions and have delivered a stable earnings performance compared with the preceding year. So, looking at the long term, this is a division where, if you look at the graph to the right, we have moved from net sales of just under 1 billion in 2021 to over 2 billion today, and we have increased profit. So the trend is profitable in the long term. We can see that in this quarter acquisitions performed really well. And as I mentioned, net sales in Europe and the US are a little bit lower than we would have liked. But the results and margins remained strong. Looking at Division PLM, net sales decreased to 420 million in the first quarter. Adjusted for currency effects, it is -4%. Here, we can also see a trend of customers choosing subscription solutions rather than perpetual licenses. That has had an effect on the top line as well. But the demand for PLM systems, design, and simulation software and related services from strategically important segments such as Aerospace & Defence remains strong, and we have expanded several customer engagements, particularly in the Nordic countries. The market situation in Germany is still challenging, and investment decisions regarding major projects are still being approached with caution from our customers. EBITDA has increased to 33 million compared to 4 million last year. But those of you who were with us last year know that we had some restructuring costs last year. Those have had a positive effect, and we can see that the margin is going up. And if we add back the restructuring costs and compare, we can still see an 18% growth in EBITDA compared to the comparable quarter last year. So it's a good performance, and we can see that the cost efficiency measures taken have had an effect in the business. We have made an acquisition here in Q1 and acquired a customer base in Germany. The Dassault Systèmes software customer base added 80 new customers to the 6,000 we already have. And net sales on that customer base are roughly 80 million, and this is something that we can add to the organization that we already have in the German part of Technia's business. Looking at Process Management, it continued its positive streak for seven quarters in a row. Net sales increased by 15% to 466 million. EBITDA was up 27% to 104 million, and EBITDA margin increased to 22.3% from 20.3%. This was the seventh consecutive quarter in which the EBITDA margin improved year on year, along with good efficiency and effective cost control. Acquisitions such as Genus in Norway have contributed to this earnings improvement; the public sector is still stable. But we can see that there is an uncertainty in the world, and those larger projects that we probably did more of a couple of years ago are still being approached with some caution. As we mentioned earlier, Tribia has changed to this division, and all comparative figures have been adjusted accordingly. And we think this is a good change. It's in line with the group's strategy, and it aims to strengthen collaboration between companies, focusing on the public sector and digital case management, and it will create conditions for further growth and efficiency improvements. It also means that division Process Management will have a stronger node in Norway with the company's Genus, Decerno, and Tribia. We have touched upon acquisitions, and as we mentioned, we had a really strong year in 2025, adding at least 700 million in net sales, which had a good effect on strengthening the group, meaning that we were able to build, for example, Symetri into the world-leading global Autodesk partner with a presence in Europe as well as North and Latin America. We also strengthened Process Management with a strong Nordic footprint and acquisition of Genus in Norway in Q1. We can see that the acquisition climate has been characterized by greater uncertainty in valuation discussions, mainly driven by AI concerns and a more complex macroeconomic geopolitical environment. But as I mentioned previously, we have made one acquisition of the customer base here in Germany, and we are still continuing to look at acquisitions. But given our many acquisitions in 2025 and the uncertainty in the world, we probably will see a slower acquisition rate this year, and we expect to pick it up by the end of the year. Just to touch upon AI, AI is something that we're all talking about, something that will have an effect and is having an effect on all of us. It's an important focus area for Addnode Group. We believe it enables continued innovation. It will increase customer value and our internal efficiency. We are, as a group, focused on a few nodes around software and digital solutions for engineering, design, asset management and public sector workflows, and we think that's an important asset. Our strong customer relationships and our in-depth knowledge of the processes, paired with the data created and stored in the digital solutions we provide, represent a strong platform for development of new AI-based services. What is core in all our domains and our divisions, is that we have a deep domain expertise and provide software for entire workflows. We provide mission-critical systems that are embedded with our customers. We are a trusted ecosystem partner in regulated environments. We are supported by strong partnerships with, for example, Autodesk, Bluebeam, Dassault Systèmes, and Esri. That means that they are able to invest in things that we are able to provide to our customers. We also embrace AI because we believe that it's something that will make us stronger and increase our customer value. So I believe we have a good starting point where we are. And just to give you some examples, we have, if you look at the last three or four quarterly reports. We have presented some new AI products to give you a flavor of what we are talking about. And if you look at what we're presenting this quarter, for example, with the Inuse connect to IoT platform, one of our customers, the machine manufacturer, has been able to increase his production efficiency, cut costs and reduce its service calls. We look at the other example where AI simplifies and streamlines inspections. In Sweden, there is a requirement to conduct ventilation controls and report them to the local authorities. And the local authorities are our customers. So with the Sokigo software, you can automate and create an end-to-end digital workflow that enables Swedish Municipalities to fulfill their statutory responsibility for mandatory ventilation inspection. This has resulted in shorter lead times, lower energy consumption, and improved public health. These are two very good examples where we can infuse existing solutions with AI to provide more value to our customers. So AI is definitely an enabler for increased customer value. It's innovation efficiency. The technology, integrated into our customer solutions and internal processes, is an important aspect of how we create value. We as a group do believe in decentralization, but it means that we push it through a few themes to make things happen within our group. All the different companies in the group are doing a fantastic job, but what we specifically push and help each other with is to make sure that we continue to develop AI-driven customer solutions, and we are doing that by ourselves. We are doing that with our partners and it's a constant development. The important thing is leadership and how we make these things happen because it has an effect. So we try to work together. We push it through our Executive Summits. We have different meetings within our divisions to make sure that we have the right leadership to make things happen. And then also, on a more subject matter level, looking at development, sales, marketing, for example, there are different networks within the group that span across the group level, but also within the different divisions, to push this and make it happen. And then we try to promote by showcasing good examples, for instance, through our annual innovation program. I think this year, we have 60 very good applicants, and now it's down to seven in the final. And most of them are actually in production because you can see the potential in AI started by coding a couple of months ago. And it's already happening. So it's a lot of things happening, and we're trying to push for it. But we are a decentralized organization. That means that we have a lot of things happening in the group, so let me try to sum this up. We can see that we are delivering on our growth strategy. We are combining organic growth with a value-creating acquisition strategy. If you look for a full year perspective, even though we have a quarter with lower inorganic growth, our financial target is to grow EBITDA with 15% year on year. That means that we aim to continue to double EBITDA every fifth year since 2016. We have a compounded annual growth rate of 19%, and we are increasing EBITDA margin with our presence across various regions and industries where our digital solutions are mission-critical. We have built a robust business that remains strong even in a challenging economic climate dominated by geopolitical turmoil. Looking forward, growth and improved earnings will continue to originate from the development of new offerings. The implementation of AI and acquisitions will also contribute to this growth. We will continue to optimize our organization as technology, market conditions, and the economy change. Addnode Group has shown and will continue with the creativity, perseverance, and commitment needed to generate value for both our customers and our shareholders. So with that as an introduction, we would like to open up for a Q&A session.
If you wish to ask a question, please dial Pound key five on your telephone keypad to enter the queue. If you wish to withdraw your question, please dial pound key six on your telephone keypad. The next question comes from Erik Larsen from SEB. Please go ahead.
Hello, Erik.
Hi. Can you hear me?
Yes. I can hear you. Thank you.
Hi. Okay. Sorry for that. Great. I have a few questions. So first off, if you look at your customer base for the rest of the year, do you see fewer agreements that are up for renewal or was that more isolated to Q1?
What we can see is that we had a few agreements here in Q1. And then, we would probably see a return to more historical, normal activity over the year, where Q2 is usually slower, Q3 is okay, and Q4 is better. So we would probably see that pattern during the year as well. What I would believe.
All right. And then I wanted to ask you about the M&A contribution, which was strong here in Q1. And if you could just give some flavor, if that also reflects the seasonality in SolidCAD and FF Solutions, or to what extent we could extrapolate this to Q2, for instance.
That's a very good question. And yes, there's seasonality in that because Q1 contributions tend to be very strong. So yes, there's definitely seasonality in this. So you cannot extrapolate it for Q2. You should probably expect, as I mentioned, that Q1. Yes, very strong. And we are proud of that. And then we will probably see that Q2 is the slowest quarter during the year. And then Q3 will be sort of okay, and Q4 will be better. But that's what we're talking about, the full year here. So, if you look at the guidance we provided, we expect a run rate of probably around 700 million plus from the acquisitions made in 2025. And then you compare it with the very good contribution in Q1. You'll see that there's a sort of overachievement compared to that in Q1, and that has to do with some expectation that Q1. It should be better, so to speak. So there definitely is some seasonality there.
Okay. Perfect. And then a final question on cash flows. I think you talked about it a bit, but we've seen now two strong quarters. And this normalization that you've mentioned several times is currently taking place. But then historically we have seen limited cash flows in Q2 and Q3. So the question is, should we assume that in '26 as well? Or is there still some catching up to do?
Yes. If you look at the cash flow. We have the strongest cash flow quarters in Q4 and Q1, and based on historical patterns, Q2 is slower, and the lowest pattern in cash flow is in Q3, so we expect the same pattern going forward as well.
Okay. That was all for me. Thank you, thank you.
The next question comes from Thomas Nielsen from Nordea. Please go ahead.
Thank you for taking my question. When you mentioned a lower share of three-year contracts in Q1, how much of the -12% organic growth in Design Management comes from this lower share of three-year contracts?
We don't have an exact figure for that. But to provide some guidance, we started off, and this has to do with the structure of our business base. For example, the contracts that were sold one year and three years ago. Those are the contracts that were expected to be renewed this quarter. So that means we had a lower base of contracts due for renewal compared to the same quarter last year. So we expected lower net sales compared to that. So we have an effect of that. And that was expected. And then, of the contracts that we renew, the customer more often chooses a one-year contract. And we expect that pattern to continue going forward. So we'll see that. The good thing is that the number of customers is increasing. So we can see that we're at least flattish on the underlying customer value of the contracts. If we try to annualize the value of the three-year contracts. So the organic decline is not truly 12%. It has this effect due to the shift from three-year to one-year contracts. And you can see the strong cash flow as well. So you will not get a full number of that. But we are saying that we are observing a more flattish growth rate for the underlying business.
Okay. Okay. And in terms of organic growth at group level, when do you expect we'll return to organic growth for the group? Will it be in the remainder of 2026?
I think the best guess is that, as a group, we will not have organic growth this year. It has to do with our approach; if you look at it, we will always strive. It also has to do with us continuing to protect. The bottom lines. You can see there, for example, we are increasing our EBITDA and we are increasing our earnings per share with 24%. We will have a focus on that, but I wouldn't expect us as a group to have organic growth this year, given how we started this quarter. You can see that we will not be able to catch up on that during the year, and we are not planning for it. I think we said, going back to our capital markets in last autumn, that we expected low organic growth for the next year. And now we can see that the geopolitical situation in the market has definitely not developed as we expected at that time. So, if now we are probably saying that that low sort of organic projected growth has probably turned around to say, let's strive for organic growth, but we are not planning for that.
Okay. Thank you very much. One final question. Do you see any risk on the horizon? AI-native startups in your business areas?
The short answer is. Of course, we see risks because we also see all the opportunities ourselves. What we can do. So there. But the next question is probably whether any of that has materialized. No, because there are the things that, as I mentioned, our solutions are very much still embedded in our systems. Moreover, we operate in regulated environments. So, two- or three-person startups are not the relevant options for our customers to handle this. But having said that, we are also seeing the many things that can be done. So of course, there are risks, and we try to address them as best as we can and develop ourselves. So there are always risks in running a business. And within the risk also lies the opportunities.
Okay. Thank you very much.
The next question comes from Daniel Thorson from ABG Sundal Collier. Daniel, please go ahead.
Yes, thank you very much. I also have a question on Design Management here in Q1. Do you think that the one- and three-year agreement changes here are to some extent explained by some AI uncertainties as well, both because customers may not know what competition and pricing may look like two years out, but also that they may face headcount reductions internally themselves? Is that something you hear in customer discussions?
We are not hearing customers say that this is because they are looking at AI. We're also hearing some customers saying that. What do you think about changing your system? Oh, that's not an option because we are so heavily embedded in our processes and routines. For example, if you are an architect or a technical consultant, all the new development that you're doing, all the historical, everything is so heavily embedded. So it's a very long and painstaking process. It's like trying to change SAP for Ericsson. It's a lot of things. But having said that, it's quite tough to understand what are sort of general things affecting business and what is AI? And it is.
No, I understand that customers are embedded with the solutions and they may not change it, but I also think that some of the customers that consider a three-year agreement. Now, they may think.
It could.
Prices for this will be lower two years out. Or our 100 architects today may be 90 architects in two years because of internal efficiency and productivity. So it's better to go with a one-year agreement now because we don't know what our situation will look like in 12 months' time. But you haven't really heard that.
We haven't really had those discussions saying that, 'Because of this, we are done,' because I think customers are still trying to understand, given that you are a little bit ahead of the curve compared to our customers. We also have customers saying that they want us to ensure that we are not implementing AI in their solution because they cannot do that for regulatory reasons. So we have all those types of discussions. And I usually say, ask me that question again next quarter. And then I will probably reevaluate that. But so far, we haven't had those big discussions with our customers where they say that we're going to decrease by X percent. So be prepared for that. I'm not saying that it's not going to happen. I'm saying that we have not had those discussions.
Okay, understood. Understand. And then the second question here on Design Management, you answered partly to Thomas's question there on organic growth guidance for this full year. Did you refer to Design Management or on a group level? Because on the Capital Markets Day, you said that you expect low single digit organic growth in Design Management for 2026, and now you say not on a group level.
I think they are interconnected. If we are not able to do organic growth in Design Management because it's roughly half of our business, then we're probably not going to be able to do organic growth on a group level, because for PLM, for example, we have taken the decision to discontinue some business to improve our profit margins. So we can't really expect to do organic growth in PLM for the full year. And if we are saying that we can't expect organic growth in Design Management, then any organic growth that we would hopefully be able to generate in Process Management will probably not be enough to compensate for the entire group.
That makes sense. Then the question on Q2 here in Design Management, we know that we have a tough comp from last year. You had the positive boost from renewals before mid-year there. And how should we think about the magnitude of organic growth in Design Management in Q2, which will obviously be materially larger on the negative side compared to Q1 here, but is a 20-25% magnitude unreasonable given that you grew 50% last year?
I think that depends on what you compare with because we had a significant boost in Q2 last year of pre-ordering three-year contracts because that was the end of certain terms. And that also means that we have less sales in Q3. So I guess it's not that easy to just answer because that depends on what base you're comparing with.
I was thinking year over year versus Q2 last year. I guess it will just be a large drop.
It will be a large drop. And that has to do. And it's a very good question. And I just want to remind everyone that Q2 last year was a significant boost from the pre-ordering. That meant that we had Q3 very much slower. If you want to address the magnitude of the changes, you need to combine Q2 and Q3 last year.
Yeah. That's clear. And then, for the final question regarding Process Management, you had 1% organic growth. So that means that either volume or pricing is negative year over year. Which one was negative here in Q1? If you could.
I think it's volume. So we have some pricing. And for pricing, we can probably make some adjustments. So I think it's a mix. So that means it depends a little on how we measure. Our volume is slightly negative or flattish. There's no growth in the volume to make that organic growth happen.
Yeah, that's clear. Thank you very much.
The next question comes from Frederik Nielsen from Redeye. Please go ahead.
Thank you very much. Good morning. I want to follow up on the movement from three-year to one-year deals in design. Have you seen a similar pattern before in more uncertain economic environments?
I think what is happening now is that, yes, we might have some uncertainty, but just to be very clear, we have a movement irrespective of the uncertainty. That is going to one-year contracts, and it has to do with several factors. If we go back, for example, a couple of years ago, customers received a discount for committing to three-year contracts, but this then shifted to a model where they could fix the price. And now we can see that. And they still had to pay up front. And then, over the years, it has moved to a point where, irrespective of whether you fix the price for three years, you still have to pay yearly. So the trend of moving to one-year contracts has been ongoing for the last couple of years. I think the majority of what happened is a push to one-year contracts within the system, and there is uncertainty in the normal market. Things are going to happen. So just to add some flavor to your question, no, we don't have any sort of good historical comparable saying that in these times customers choose this and that, but we are talking more from a. It probably makes sense. And I had a previous question. Do you think the customer has done that for them? It's hard to answer, but I also want to put out there that we have a trend moving to one-year contracts, and that will continue. The good thing is that we will be able to show more. Less volatility in our reported earnings going forward for the same customer base. If we are able to increase the number of one-year contracts. Does that make sense.
Yeah. Yeah. That's good. And let's move on to PLM. As you mentioned, the margin increased quite a bit year over year. But I mean it was still below the second half of last year. I guess there might be some seasonality, but still there seems to be a slightly lower level. Has the market worsened somewhat, or could you help us understand the number?
No. I think what you're observing about Q1 is that it's always the best quarter for Design Management, but it's also the weakest quarter for PLM. Historically, irrespective, if you look back over the years, you will find that Q1 is probably the weakest quarter. And that has to do with some seasonality, with sales of software and delivery of projects. The projects themselves involve more services. So that means that January is probably a little bit slower because you just sort of start up for the year, you do more projects and in Design Management, you end the year in January. So there's some seasonality in that.
Okay. I agree to what you're saying to some extent, but still, in 2024 and 2022, the margin was quite strong. Also, in Q1, were those quarters exceptional, would you say, or how should I understand that? You don't really see that seasonal pattern in the numbers you report, I would argue.
You have better data in front of you than I do. I don't feel that if the question is whether we are being less efficient as we go ahead. That's not my thing. I expect that we will be able to continue to improve earnings this year compared to last year, if that is the underlying question.
Yeah, that's that's clear. And last question regarding the capitalized work, it increased quite a bit relative to sales. Is this the level we should expect going forward, or was there something special in the quarter?
The special reason in the quarter is that we now have our company in Norway. Genus, which is providing its own proprietary software, the development of which has been capitalized in Q1. We didn't have that in the past. So that you can expect, and that has not been depreciated or amortized over time yet. So for the companies that are providing own products and solutions, we will expect more capitalized R&D being put in the numbers.
That's clear. That's all for me. Thank you very much.
The next question comes from Michael Lessin from DNB Carnegie. Please go ahead.
Yes. Good morning. Hi. Um, I have a few questions. And the first one is on Design Management. And how Autodesk's increased focus on new sales versus renewals is affecting your business.
That's a good question. The short answer is that we don't have the full analysis of that. It's in the things that you mentioned. Is that from February? So it's the first month of the Autodesk year. The incentives are slightly changed so that they are pushing for moving more from the back end to new sales. And it's a little bit too early to say that because we have only had that process for two months. And so we don't have any good analysis of that. But basically, like everyone else, they are trying to promote new sales over renewals and taking care of the existing customer base. We are getting incentivized for both, but in a new model, more on new sales. So it's a little bit too early to do any bigger analysis of that. But basically, if we sell less, we probably will get less margin on that. That's the expansion and the margin. That means that in an agency model, that's our net sales.
Yeah. Okay. But you haven't seen any dramatic effects so far in Q2 then.
No, not yet. But we will. So I would strongly advise you to ask me that question again next quarter. And then we will see, because then we will have been able to go through a full Autodesk quarter and then into next quarter, and then we will be able to see how this pans out.
Okay. Thank you. Can you give us some background to the dynamics in new sales versus renewals for Symetri-defined segments, how that works today. And so, we can understand the potential changes if there are any.
I think you have to look at it by market, by market. Looking at Europe and the US right now, new sales are a little bit slower. And new sales means that either we are selling new seats for existing systems and modules, or selling new models. The new software. So it's a mix of that. But then also, if you look at the dynamics, you can see that. For example, in Brazil we have strong growth, and that is supported by all the infrastructure investments being made. And so that we have a strong position there. Canada, we have a very strong position as well. So we can see that it's growing well. What we've been struggling with recently has been in Europe and the US regarding new sales this quarter. I don't know if that was your underlying question. Please ask me again.
What are your thoughts on the renewal rate? I guess it's pretty high. Do you have a loyal customer base, or are you focusing on new sales? And so you will still get it. A fair amount of revenue on that, but it's a bit more towards yourself, so you get rewarded more for pushing more new sales. That is what's going on.
That's a yes. The short answer is yes. We will compare to a year ago. We will get higher percentage margins on new sales compared to the renewal of the existing customer base.
Yeah. Got it. Um, and, um, all right. So, are you seeing any pressure on pricing here in the design segment, or volumes, or partner economics in general, and the underlying changes apart from this push for new sales?
If you're talking about pricing, are we talking about pricing to customers?
Yes, I guess so. And the relationship with Autodesk.
Yeah. Regarding pricing to the customer. We haven't seen any pressure on that. So we can see that we have a normal, KPI-level. We are seeing level price increases. That's in the system; the message is that if we continue our work, we will still get our share of the cake at the same level. And that goes back to your question: how has that panned out with promoting more new sales compared to historical methods? We haven't seen how that pans out, but that's the message still. And we are going for that. So still, they are pushing for the channel, and we still have some more work to do.
Okay. Got it. Um, yeah. And I was also thinking about, in general, the underlying trend for this type of CAD players is something to bundle more and sell more complete packages, I guess. You also benefit from that, selling more to the customer base, upselling, cross-selling. So how do you work with that?
That's what you mentioned. Yes. As these products are becoming more and more adding more value to a customer, it also means that they are more complex to address with the customer. So that means that we, as a partner, are investing more and more in our service capabilities to address that value for our customers. So that means that it has been beneficial for us as a bigger partner, or the biggest partner, for example, for Autodesk, and as one of the biggest, we have the capabilities to bring out the full platform. So that's definitely a trend. So we believe that compared to other partners, we have an upside on that. So definitely. So that means that we are investing in people. Most of the people who work with us have a background in the industry themselves. They have been architects, technical consultants, working in process industries, etc. So we claim that we understand the processes that the software supports. So that's very important for us. So we believe that's something that will have a positive impact on us.
That's good. Good clarity. Thanks. And maybe, if I may, I have a question about your comments in the report regarding new offerings. Can you sort of talk to us about what that means?
Let me think. New offerings for us encompass both new developments and the enhancements we are making. Some of the examples I mentioned here in the report. Today, we are able to bring some new offerings to the market, helping our customers become more productive in maintenance. We are also able to combine existing offerings, infuse them with AI, and provide more value to our customers. Those are those types of, we are probably not the type of company that's going to make a greenfield or major investment. So we are probably good at making things even better as we are. And we can also see that our product development is becoming more and more efficient by ourselves. So we are probably hoping and also working with our partners to bring new products into the market as well. So it's not the product. It's a lot of products that we're constantly developing to bring out to the customers. So as part of more of an evolution rather than a revolution.
Okay. Thank you.
The next question comes from Daniel Djurberg from Handelsbanken. Please go ahead.
Thank you and good day, Johan and Kristina. Most questions I was going to ask, but I have a question coming back to you talked a little bit about the pricing trends with Autodesk. And also, can you say something more on that like-for-like magnitude? And if we saw the full impact in Q1, and if there have been any changes with regards to Autodesk, concerning the shifts from renewals versus new sales. If they take a larger share of these price increases themselves than in the past. Thanks.
Okay. The first question I get is, okay, can I say anything about prices? And just to be clear on the last one, I didn't fully understand the question. The last part of it.
Not needed. I'll address the first question.
Yeah. Thank you. About pricing, we can see that our expectation is not to achieve a 5-10% price increase. It's more like, can we expect to do a 2-3% price increase? And then for the existing ones, that's probably more what we can expect in this environment.
Yeah. May I ask you also, since it is now Autodesk doing the invoicing themselves. And do you have easier to get the price increases through since it's Autodesk doing this, and you will just go with the flow here, I guess.
Yeah. No, I think the good thing is that we live in a world where we have sort of the help of Autodesk to keep the price up. Historically, when we were more of a direct sales organization, competition led to price pressure. So with this new agency model, it's easier to keep the overall prices up in the market from that perspective. And yes, we can see that because we see the invoices that go to the customers, and we are the ones who send the quote to the customers. So we definitely see the end value. So we know the end value to the customer, as we are the ones sending the quote to them. And when they say yes to the quote, they get an invoice from Autodesk.
Okay, awesome. Another question for me. You talked twice. I think in the call, you mentioned that a number of clients have increased in India and North America in Design Management. And so, number of customers. Is this also excluding the acquisition, SolidCAD and FF Solutions?
Yes.
Okay. Great. Yeah. I will leave it there. And good luck to you too.
Thank you.
There are no more questions at this time. So I hand the conference back to the speakers for any closing comments.
Nope. Yes. Thank you for all the good questions and taking the time to talk about Addnode Group. So thank you.



















