Inderes’ Disclaimer can be found here. Detailed information about each share actively monitored by Inderes is available on the company-specific pages on Inderes’ website. © Inderes Oyj. All rights reserved.
Read transcripts of webcasts and audiocasts
Read transcripts of webcasts and audiocasts
Disclaimer: This is a machine-generated transcript and may contain inaccuracies.
Thank you. Operator. And a very warm welcome. Good morning. Good afternoon or good evening to all of you attending this third-quarter 2025 earnings call. Together with me is Wagner Rego, who will guide you through the presentation. But before we start, I will repeat the same topic. I always say when we start the call that when we begin the question round after the presentation, please only ask one question at a time. This ensures that all participants have the opportunity to raise their most important question. Is there more time available afterwards? You are, of course, more than welcome to line up again to ask your next question. With that, I hand over to Wagner Rego, who will start the presentation.
Thank you very much, Peter, and welcome to this conference call. Quite happy to be here once again. So if we go straight to the summary of this quarter. We have observed mixed demand with stable orders. Pretty much in line with what we have said on the guidance for Q3 during the Q2 conference call. So, and then you can see industrial compressors are flat, and in the gas and process segment, we see a decline in the orders received. When you look at the year-over-year comparison, it's good on the industrial vacuum side, but negative on the semiconductor vacuum side. Due to the conditions in the market, we had solid growth for power equipment, which we were quite happy to see. And again, we've experienced good growth in our service business. We see that our efforts to further develop our service business and the implementation of the installed base have been successful. It was somewhat up, and we had two business areas with good, reasonable organic development and two business areas with negative development that led us to a growth of 1%. The profit margin has been affected by restructuring costs. We will come back with more details and acquisitions. We have completed six acquisitions. I would like to highlight them because they are very important for our strategy. The strategy. The first one is ABC Compressors. That is increasing our ability to serve customers in hydrogen and CO2 applications. And the other one is Share, a joint venture. We acquired 70% of the company. And it's going to be a very important one for our development in China, adding technologies that we didn't have in our portfolio. So cash flow was quite solid. We were very happy to see we continue to generate very good cash flow. So moving to the next point, when we look into the financials, how was that translated? We reached 40.5 billion Swedish kronor in terms of orders received. As you can see in 41.6, revenues and orders received were more or less aligned with the previous quarter but unchanged organically. As I have mentioned, we achieved 1% organic growth in revenues. Operating margin was 20.5. But then if we readjust for the restructuring costs, we end up at 21.3. And the operating cash flow, we have mentioned already 7.3 billion Swedish kronor, which is quite solid. We were quite happy to see that development as we then move to how we have performed all over the world. Starting with North America, we observed that the environment still presents challenges and uncertainty. But we are happy with the quarter showing a 10% increase. If you correct for currency. So, and there we see very strong development in Compressor Technique and Power Technique that we were really pleased to see. Vacuum and Industrial Technique were slightly negatively impacted by the semiconductor and automotive markets. When it comes to Europe, it was also good to see a 10% development. Here again, Compressor Technique had good development. Positive development. Power Technique performed similarly. We had negative development in Vacuum Technique and Industrial Technique. The only headwind we had was in Compressor Technique, mainly due to large gas and process compressors and some large industrial compressors where we saw negative development, but combined, we still had a positive development of 1%. South America, being more specific, had positive development with almost all business areas showing growth, except for the Industrial Technique, which was negative. And then Africa and the Middle East had quite a big comparison to beat. And there we saw negative development mainly influenced by Compressor Technique and Power Technique. Overall, if we adjust for currency, we see a plus two in orders, which is more or less aligned with what we have observed year to date. If we then move, if we combine again all the figures, we can see that we had a plus 2% in structural change. That is basically due to our acquisitions in revenues. The acquisitions performed better with a plus 3% increase. As we have mentioned, we ended up with 40.5 billion Swedish krona in orders received and 41.6 billion in revenues. So if we then see the split among the. The business areas, we can see now that Compressor Technique in the last 12 months has contributed to 46% of our orders received with its order development. And this quarter experienced basically zero percent growth. Vacuum Technique. 21% of our orders with 1% growth. Very good contribution from industrial vacuum and service. Power Technique continues to show good development in orders, now comprising 17% of our business, with a 5% increase in the quarter, and Industrial Technique has a -3% decrease in orders received. If we then move to Compressor Technique. This is what we have observed. Industrial compressors were essentially unchanged. Let's say there's a slight negative trend towards the larger compressors, with a bit more positivity towards the smaller compressors. That is not a significant indicator, but that's simply what occurred. In the quarter, we saw a decrease in order intake year-on-year for gas and process compressors. But sequentially, we saw good development and improvement compared to Q2. The service business continues to develop very well. Once again, we are quite happy to see that revenues have performed well. That shows that the quality of our order book is good. And we continue to develop with a 4% organic growth in profitability. We are quite happy with this level. Of 25.3%. We should keep in mind that we have made slightly larger acquisitions. That has a bigger impact. We are focused on doing more integration tasks at the beginning, particularly deploying our IT resources, especially when it comes to cybersecurity. So, there is a bit more cost at the beginning to safeguard our acquisition. So a bit more cost. But we are happy with that level of 23.5%. So ROCE remains at a good level. And we continue our innovation pipeline with Compressor Technique. And here today we brought an example of our development in China, illustrating how sometimes you have to develop products with more features to offer a different value proposition to the customer. Sometimes you have to innovate to reduce costs. And this is a good example of how we innovate to also reduce costs to be competitive in China, but also to create options in other regions as well. A very good achievement. Now, with this new innovation, if we turn to Vacuum Technique, we saw a 1% increase, which is a positive development, although it is not in the semiconductor market. It's very good to see that industrial and scientific vacuum equipment continues to develop very well. We are still yet to see a positive development in the semi market. But we still face challenges, especially in North America when it comes to the semiconductor market. On the other hand, it's very good to see the service business developing very well, especially in the semi part of the business. New fabs are being built and coming into operation. We manage now to get the aftermarket from these parts, not only on the semi service but also on the industrial service, which is developing quite well. And then we have headwinds in the revenue. Revenues were down 6% organically. That put pressure on the bottom line. But we see good traction on the restructuring activities that we have announced and performed during the year. But this quarter, we felt that due to the headwinds we have in the North American organization, particularly in the semiconductor market, we decided to further optimize our footprint there without damaging our ability to grow, sell, and further develop the business. I think that we didn't touch, but we have reorganized our North America operations, which include reorganizing one factory to adapt one of our service centers to integrate and also to. To work in our customer center, we aim to optimize the management structure and safeguard our ability to support our industrial and semi customers. I think that was the main target, and that's why we decided to do a new round of restructuring in Vacuum Technique to make sure we safeguard our bottom line. So then, the adjusted operating margin was 20.1%. So the return on capital employed was 18%. And we continue to innovate in the semi market. You know that real estate is very important in the semiconductor market. I mean the footprint that your product utilizes is very important. And we managed to develop this integrated abatement system that occupies 30% less space in the Fab. That's also important to support our customers in that market segment. If we then go to Industrial Technique, we saw an order decline of 3% that is mainly driven by the headwinds in the automotive sector. And I would say not everything is negative in the automotive. We still receive a good level of orders when it comes to flexible production lines, meaning if the production line needs to be more adaptable, we can support our customers. We have more products and more software-driven products as well that can support our customers. And we also see more demand for automation. That's positive. But on the other hand, we see fewer production lines being built, and that means fewer projects. And the project business is facing more headwinds. So, that's what we have seen. And service was basically unchanged. That is also influenced by the number of cars produced. And that's why we see a stable level in service. In Industrial Technique, revenues were down 1% organically. Operating margins were at 18.8%. Excluding the restructuring costs, there was a minor restructuring cost of 53 million compared to Vacuum Technique. So we keep on fine-tuning our organization in Industrial Technique because we face headwinds. And it's the same concept. We have optimized the management structure and we try to adapt to the circumstances that we see today in the market. And again, the innovation efforts continue here. We developed a product that significantly reduces dispensing time by about 50%, which can definitely support some of our customers. We are also quite happy with that development. So if we then move to Power Technique, it is a more positive picture when it comes to order development, showing solid growth in equipment. Basically, most of the equipment division had a positive development with good growth in rental. I think that we continue to develop, with revenues up 3% organically and an operating margin at 17%. Here we have higher functional costs and a slight dilution from the acquisition. But I think the main topic here is higher functional costs. We have created a new division to sell industrial flow products. We are building up competence in our customer centers. I think that will bring good organic growth, but we are yet to see a translation into improved margins, which will come over time. We believe we can operate with a higher margin in Power Technique. And now it's important as well with the acquired companies, we also invest in innovation on the functional cost. That is also a component of higher R&D because with the acquired companies, we buy technology, but we believe we should continue to innovate. This is one example of an innovation from one of our acquired companies, Wangen, which managed to introduce a new twin screw pump for applications requiring the pumping of high viscous media at high flow rates. It is also very good to see our innovation. So with that, I will transfer to you, Peter, to talk about our profit margin.
Okay. So with that, I will transfer to you, Peter, to talk about our profit margin. Wagner. Excuse me. From the operating profit of 8.5 billion, we go through the net financial items, which are slightly lower due to somewhat lower financial exchange rate differences, to a profit before tax of 8.5 billion, compared to 9.2 billion. Last year, there was an income tax expense of 1.8 billion. That means that we have an effective tax rate of 21.1% for the quarter, which is on the low side. The main reason for that is, besides the normal things that we see recurring, we also had a lowering of deferred tax liabilities linked to the lower announced tax rate for the German market. Therefore, this is a fairly low tax rate. It also still includes some of the release of provisions from the past from China high tech. We used to have. And so, for the next quarter, we think the effective tax rate will be somewhat higher, probably around 21.5 to 22% in the near term. And that gives us a total profit for the period of 6.7 billion, and basic earnings per share of 1.37 Swedish krona for the quarter. Then I will move on to slide number 12, discussing the profitability in detail. I would say, first of all, overall, I think we were quite pleased with the overall profit level that we managed to achieve in these quite turbulent and difficult circumstances. As already explained by Wagner, we had some restructuring costs actually. Also, last year, we had some restructuring costs. So therefore, as you see here in the bridge, the total net cost for this year was about 205 million SEK. For last year, we had a cost of 123, leading to a net 82 million in the bridge, slightly diluting the margin as well as the impact of the LTI programs. Also having a small negative impact. But the main headlines of the profitability development, I would say, were, on one hand, a slightly positive currency development. As you remember, last quarter, we had quite significant impacts of currency. But this month, this quarter, it's much milder and actually slightly positive. So I will not go into more detail like I did last time. The acquisitions, however, are a detractor of about 0.6 percent. Also, the tariffs had a bit of a negative impact on the profitability for the quarter. Nothing dramatic, but I have to admit that we did not manage to completely compensate for the tariff impact and the turmoil in that particular area throughout the quarter. I think these are the main contributors to the profit development for the quarter. The contribution is due to the fact that the average rate continues to decrease, all things being equal, and therefore, we would expect anywhere around 800 million potentially of cost impact. If we then take the profitability and dive a little bit deeper into each of the business areas, highlighting the main contributors to the respective profit developments on slide number 13, then starting with Compressor Technique, first of all, 25.3%, continuing at a very good and solid margin. There was a slight detraction from the acquisitions, which, in our belief, is a very important investment in future growth. We also front-load a bit more with costs in order to safeguard a good, speedy integration process from the beginning onwards, and that is the reason why we see a bit more of detraction from the acquisitions. Otherwise, I don't think anything else was particularly strong. Secondly, perhaps. Also, of course, the tariffs had a minor impact as well on Vacuum Technique. Here, there's a bit of a mixed picture with a bigger impact from currency. As you can see, the main reason is that last year we had quite a big negative impact, and that in the bridge then turns into quite a significant positive. Otherwise, it would be relatively comparable to the other business areas. But that's the reason for the high positive. On the other hand, volumes were the main detractor. We see, of course, the top line going down by 591 million Swedish kronor. And that has an impact on the profitability on the bottom line. That's the main contributor. But also here, tariffs are part of the equation. Again, a minor impact but still an impact on our profitability stability development. And of course, we already mentioned the restructuring net impact in the profit bridge as well. Industrial Technique. Also here, the impact of the restructuring cost, as I already mentioned, further, the revenue volumes were negative, negatively affecting the profitability. The currency also had a slightly negative impact from a margin point of view. Also, the acquisitions were slightly dilutive. Overall, going to 18%. I think with the restructuring activities, we are working hard to try to turn the corner and improve profitability. As already indicated, we evaluated quarter by quarter how things develop. And whenever needed, we take the necessary measures, and we need to do it cautiously because, for example, in Vacuum Technique, you've seen the very solid development of service. So obviously we cannot just cut costs everywhere. In the organization. We need to do it in a careful way so we don't jeopardize the growth of the respective businesses. And then last in the table here, Power Technique is delivering a solid margin of 17% again. We are investing in a new division as one aspect of it. We are also working on a number of transformation projects, rejuvenating some of the old ERP systems we have for specialty rental for some of our production entities, for example. And that also triggers a number of additional costs for the time being. But over time, of course, we expect them to become more efficient and, as a result, also improve the margin coming from those different investments. Also, investments in dedicated sales personnel in Power and Flow are being made, as well as within IFD in the Industrial Flow Division. We are working hard to build that organization so we can leverage the sales of all the different technologies we have acquired in the last few years. So I think that explains the overall profitability, business area by business area. If I then move to the balance sheet, I would say it is relatively uneventful. Of course, on the one hand, intangible assets go up due to the acquisitions. On the other hand, we amortize. So basically quite stable. We see some impact on the inventories, for example, which is beneficial. We are indeed improving the inventory levels across the organization with all the different actions that we have ongoing. Receivables overall are fairly stable, especially from a relative point of view. So we are quite happy with maintaining that good performance on the receivable side. Mainly, the equity is changing because we are generating more profit. While on the other hand, of course, we are also paying dividends. On that point, I would like to highlight the fact that tomorrow we will actually pay the second installment of the dividend related to 2024, amounting to 1.5 Swedish kronor per share, which is roughly a total volume of 7.3 billion Swedish kronor. And with that, I turn to the cash flow, where I believe there is a solid performance, you could say. Yes, it's slightly lower than last year. However, quarter over quarter or across the different quarters, I believe this is a quite significant value of operating cash flow we are generating. On the one hand, we have a slightly lower operating cash surplus, but we have paid slightly less in taxes. On the other hand, we have a slightly less positive impact from the change in working capital compared to the same quarter last year. But we also see a gradual, slight slowdown in the increase in rental equipment, as well as in investments in property and plant. We continue to make a number of investments necessary for the future to replace some of the old assets and to build new capacity, though at a slower pace than we used to a while ago. Also, given the current climate, I believe that makes a lot of sense. And with that, we end up with the 7.3 billion operating cash flow. And with that, I think we have come to the end of the comments on the financial statements. And I would like to hand back over to Wagner, who will comment a bit more on our near-term outlook.
And then last in the table here, Power Technique, with delivering a solid margin of 17% again. Here, as we already mentioned, the main topic of the lower profitability from an organic point of view was more the functional cost. Thanks, Victor. And once again, I would like to repeat that our forward-looking statement when it comes to the outlook is a sequential guidance, not a straightforward projection of our orders received. And again, to do that, to come to that statement, we look to the external world and, once again, we don't see a change in the environment. The world continues with a lot of uncertainty that is not supporting our customers in making decisions, especially on large orders. So, and then when we also look at our business internally, we don't see a dramatic change. We talk with our 24 divisions, review the pipeline, and various market segments. And we see no reason to believe that there will be a dramatic change compared to Q3. That's why we continue with our statement that we expect our customer activity to remain at the current level. And then I would like to invite you to our Capital Markets Day. That will happen in Germany. We will first go to Stuttgart, and there we will have some presentations. And after lunch, we will go to our innovation center in Bretten, where we will share some of our innovations related to Industrial Technique and Vacuum Technique. And I'm looking forward to seeing you there.
Yes. Thank you. We actually still have a few places left. If you're really eager to see those products, then please come forward so we can reserve your seats. With that, we come to the end of the presentation, and we would like to start the question round. Again, I would like to repeat, please refrain from asking more than one question at a time. And then we are looking forward to receiving your questions. Back to the operator.
If you wish to ask a question, please dial the Pound Key on your telephone keypad to enter the queue. If you wish to withdraw your question, please dial the Pound Key on your telephone keypad. The next question comes from Daniela Costa from Goldman Sachs. Please go ahead.
Hi. Good afternoon. Thank you for taking my question. I want to ask a question about what you mentioned regarding the margins and the fact that you didn't fully compensate for the tariffs entirely. Is this something you see as a sort of delayed impact? Should we eventually see full compensation within the coming quarters, or is there more of an intention not to fully compensate? I don't know, maybe due to competitive reasons or something else. Can you elaborate a bit there, please? Thank you.
Sure. Daniela, thank you for your question. No. First of all, it is definitely not intentional to not fully compensate for the tariffs. I think it's just been a very turbulent quarter with a lot of changes, especially towards the end of August, with section 232 being added to the equation, requiring significant effort from major parts of the organization to investigate more deeply and qualify a number of products, etc. . So that has caused, of course, a bit of delay in being able to fully address some of these issues. And therefore, we have somewhat higher tariffs. I wouldn't say that we would necessarily be able to fully compensate in the very short term. But we are quite confident that over time, over the quarters, we will be able to compensate for the tariffs as they exist today. With that, I also need to immediately apply some caution because, as the changes are happening overnight very often, we don't know, of course, what's coming. But we continue to monitor it very closely. Maybe one thing to underline as well is that I did indicate the tariffs had an impact on the profitability for the quarter. But I also want to underline that the impact was not humongous and that it did not totally destroy the profit stability level. But we do admit that we did not manage to fully compensate for the tariff impact for the time being.
Thank you.
The next question comes from Michael Harlow from Morgan Stanley. Please go ahead.
Good afternoon. Thank you for the presentation, and thank you for taking our questions. I'll limit myself to one question as requested on the large gas and process category. Would it be possible for you to help us understand where we are in the LNG ordering cycle? Thank you very much.
Well, I think it's difficult to say exactly where we are in the cycle. I think it's a bit more difficult. What I can say is our presence in the market covers several market segments, including LNG, particularly this quarter. We did have orders for LNG as well. We had orders for fuel gas boosters. There are quite a lot of investments ongoing to increase the energy production capacity with gas-fired turbines. So, we do have products for that. However, we also saw good order development in industrial gases, for instance. So it's quite a diverse market, let's say segments that we cover, and we saw good development this quarter, including in LNG.
Yeah. Thank you. That was very helpful.
So nobody's going to go.
Thank you, Michael.
The next question comes from Klaus Berglund from Citi. Please go ahead.
Thank you. Thank you. Hi, Wagner and Peter. So, I just want to return to the impact of tariffs. You mentioned Section 232 in the third quarter. But that was the 18th of August. And then you probably had some inventory to cover you through September. Right. So shouldn't section 232 hit you harder, Peter, in the fourth quarter when the full effect kicks in from steel and aluminium? So shouldn't we see a weaker drop-through here in the fourth quarter, or can you reduce costs enough or raise prices to mitigate that incremental impact? Thank you.
Thank you, Klaus. I think that's a very fair question. And the logical reasoning, of course. Well, I think it's also fair to say that the introduction of Section 232 didn't allow us to immediately get to lower tariffs. With Section 232, there's a lot of documentation required to pass customs in order to prove that you don't need to pay a 200% tariff or that you pay a 50% tariff. As a result, I think we had a bit of a spike, you could say, maybe in September towards the end of the quarter when it comes to the impact of. 232, while now, of course, we have worked with a lot of people in the organization on trying to sort things out, both through our suppliers and through our engineering departments to our different locations, etc. . How we can document all the products in the best possible way in order to be able to get the best possible tariff under the present rules. So as a result, I think in quarter four, we are better placed to pass the products through customs duties. That being said, I think on the other hand, there will be more products going through the full quarter, as you indicate. And therefore, you could say that in absolute terms, the cost will be higher. I think overall, and it's hard to really estimate, of course, but I don't think it would result in a dramatic increase in the tariffs in the fourth quarter for us.
Thank you very much. Thank you.
The next question comes from John Kim from Deutsche Bank. Please go ahead.
Hi. Good afternoon. I'm wondering if you could give us some insight on what you're seeing in semiconductor demand. I'd say the recent news flow has been positive, both on the memory side. Plus, you have better clarity on what Intel is going to do or not do. Can you just tell us what you're seeing in VTI right now and how we should think about development into next year?
Yes. What I can say, I think when it comes to leading-edge nodes, the market environment is very positive, very good. There are a lot of ongoing investments, with players that are more mature in scaling up being really focused on the leading edge nodes. Some are trying, and I really cannot say where they are. We also do not comment on specific customers. We are not allowed to talk about specific customers. One important thing to note is that leading-edge nodes are performing well, and we are receiving orders; we are pleased with that aspect of the business. But of course, the entire market still has quite a lot of capacity. So if you look at the more advanced and legacy nodes, there is a risk of overcapacity. And of course, we need the entire market developing very well in order. We can see a shift in the trend when it comes to orders received in that market.
. And can you comment on memory, please?
Sorry, I didn't get the last comment.
Could you offer a similar comment on memory? Memory customers?
No. We are a bit more agnostic when it comes to memory and logic. We are present in both markets, and I think if there is a good development in that market, we will be able to capture that development. I think we are well positioned to capture any movement in that market.
Could you offer a similar comment on memory? Thanks very much.
Thank you. John.
The next question comes from Sebastian Kwan from RBC. Please go ahead.
Yes.
Thank you for taking my question. I spoke recently to some of your competitors in Europe. They speak of a more aggressive pricing behavior of some of your American competitors in Europe. Could you maybe give us an idea of what the pricing situation is? Could that be related to the currency differential? Thank you.
Hmm. Yes. I cannot really comment on what is happening with our competitors. I must say, we do have positive price development in our segment. If you are referring to our compressor business, for instance, we do have positive price development, including in Europe. That's all I can say; it's difficult for me to judge what's happening. I think our position in Europe remains quite solid. I think we had a good development in Q3, as you could see. I mentioned that we had positive development in Europe. So we are quite happy with the development and the orders that we have had in Q3. So good. That's what I would like to comment on when it comes to price.
That's sufficient. Thank you very much.
The next question comes from Magnus Krüger from Nordea. Please go ahead.
Hi, Peter from Rhodia. Sorry to bother. The point about the tariffs. I think you had a full 40 basis points headwinds on the organic part in the bridge margin this quarter. Could you help us frame the tariff impact within that? I'm not sure if you want to comment exactly on what it was, but some help on the magnitude would be helpful.
Yeah, I think it's hard to pinpoint exactly, of course, because, on the one hand, we do follow up quite closely on the exact impact of the tariffs. The custom duties that we need to pay when we clear the goods represent direct costs, but on the other hand, there are also many indirect costs associated with this, as there are a lot of people in the organization working hard on the whole topic. Secondly, there's also additional storage costs when you are holding goods for a longer time before clearing them, while waiting for maybe additional information or other types of things. And then last but not least, of course, we also work a lot with extra external support to help us make sure that we don't make big mistakes in the way we assess the value on which the custom duties will be paid. But, like I said, overall I think the tariff impact was not dramatic. It didn't completely reverse profitability. It was one of the contributing factors. It's okay, as you say. -0.4% overall on the group. From an organic perspective, tariffs were a contributor to that. But not the only one in there. There was also a combination of volume mix and price, you could say. So, I think, as I said, there was no very substantial impact. However, altogether, there was still an impact. And I think we don't want to shy away from saying that there is a minor negative impact from tariffs on the profit margin.
That's what I'd like to comment on when it comes to price. Thank you.
The next question comes from Alexander Jones from BofA. Please go ahead.
Thank you for taking my question. You mentioned that industrial compressor orders in Europe were up in the quarter, whereas last quarter you talked about stable air. Could you highlight for us whether that's driven by any particular areas? And how are you thinking about that European outlook in the coming quarters? Thank you.
I think it came especially from our efforts in the market segment. We have also created a new division that we call Air and Gas Solution. And they managed to achieve quite good development for some gas generation projects. I think we did quite well overall. Medical air performed quite well. There are some pockets where we can find good opportunities for growth. But in the industrial market in general, there was not a huge uptick, although in some pockets, we managed to have good business. I think it's also fair to say smaller compressors developed quite well as well. That was important. I ought not. However, But not something that I would like to say. The overall market is bouncing back. It's more driven by the activities that we have done to try to gain market share and, in some areas, to capture the opportunities in a market segment that is developing a little bit better.
Thank you.
The next question comes from Risk Mit from Jefferies. Please go ahead.
Hi. Wagner. And Peter, thanks for the time. The question is, can we double click on Compressor Technique in two regions, North America and China? If you could just walk us through how you've done in small to medium-sized compressors, gas and process, and large industrials, and how you feel your competition has done as well. How do you feel you've performed compared to the market? Thank you.
I believe in North America, stating anything contrary to market trends can be quite challenging. In North America, we are quite happy with the development in Q3 because we have all these uncertainties around the tariffs and Section 232, and the teams. They did a very good job, a very solid job. We had double-digit growth in North America when it comes to compressors. We also had good development in gas and process compressors. There is more demand around industrial gases and fewer gas boosters that are used in gas-fired power plants. Those were the pockets that were doing quite well. And then if I comment a little bit more about China, the situation is a bit more challenging. The scenario has not changed. We see fewer projects in industrial compressors, as well as in gas and process. Gas and process are a little bit more difficult than industrial compressors.
I think in North America, compared to the market, it's a bit difficult to assess.
The next question comes from Rory Smith from Ocap. Please go ahead.
Good afternoon. Wagner and Peter, it's Rory from Oxford. Thank you for taking my question. I just wanted to explore a bit further on the industrial compressor piece, and if you could provide any more insight into the difference you're seeing this quarter between small and medium-sized industrial compressors and large industrial compressors, is that difference by market or by region? Any insights on that? And I might try my luck with a follow-up, if that's okay.
I think overall, as I mentioned, it's a bit more challenging in Asia, particularly in China, where we have already discussed the very small difference between small and large. There is a little bit more favor towards the smaller compressor. But there is no significant difference. It's not something that is becoming an indicator, and I would not use it as one, because the difference is very small, although it was more in favor of smaller compressors.
Understood. I think in North America, to say against the market, it's a bit difficult. If I could just follow up on that, you obviously called out the investment you're making to innovate costs to compete in China. I was just wondering if you'd be able or willing to put some numbers around that R&D piece. Regarding the investment, it's not aimed at lower specifications, but rather... Innovating to cost compete. Are there any numbers related to that? That would be the question. Thank you.
No, I don't have a number to share. But what I can say is that we are focused as well on being competitive in China. We have made an investment in our facility in Wuxi, which we now call the Wuxi campus, where we have concentrated most of the Compressor Technique facilities in one place. And that provided a lot of R&D capabilities to our team in China, capabilities that we didn't have before, with more test facilities and R&D resources to conduct tests and design. We are increasing the autonomy that our Chinese teams have in terms of design, still maintaining good collaboration with our Belgium team, but with a little more independence. And I think that is going well. And that's why we would like to share that product, as I believe it results from that reorganization and investment. Investments.
Thank you very much.
The next question comes from Johann Schubert from Kepler Cheuvreux. Please go ahead.
Thank you. My question is also regarding semiconductor CapEx.
I understand your near-term comments on the leading edge and also the overcapacity. I think those are the kind of comments you made before, Wagner, if I'm not mistaken. But given all this, a lot of news flowed in during Q3 here. When you're talking to your customers about 2026 and beyond, how have they responded to this news and especially the future CapEx plan from their side? I'll stop there.
Yeah, it's difficult to talk about 2026. We only talk about Q4 first. We believe that it's going to be stable. I think it's difficult, you know, this market, how it works; it's a key account business when they decide to place an order or to populate a fab, they first do the R&D stage and then they do the pilot. Then they need to try to perfect that production facility with the right yield, and then they scale up, and sometimes it can come very fast. I think it's difficult for me to comment on 2026 or even 2027.
Okay. Thank you.
The next question comes from Anders Edberg from ABG. Please go ahead.
Yes. Good afternoon. I just want to ask about acquisitions. So, we've seen a very nice flow of bolt-ons. I'm just a little bit surprised when we look at the last six quarters, basically there's been very little EBIT contribution on the bridge. And I don't really have the impression that you've bought unprofitable companies here. So what is the reason? Is there some initial cost restructuring going on, or could you explain that? Thank you.
Yes. Thank you for the question. I think we definitely try to add good businesses to our portfolio of technologies and companies that we have. Definitely. But we also make an effort to integrate these companies more quickly. And I mentioned during the presentation that, for instance, cybersecurity is very important. And we try to make that a kind of non-negotiable. We try to bring that to our spec book as soon as possible. We have deadlines to meet because I think it's very important to protect the assets that we have bought. And of course, that incurs some costs at the beginning. We have seen now with the acquisition of shares, for instance, there were quite a lot of costs that we had at the beginning. But of course, those companies are profitable. That has happened in the years before as well. So, the first year is a bit more challenging. And then, we recover over time. Deploying synergies and acquisitions is very important for us. We are also reorganizing our post-acquisition process to be able to capture the synergies in a good and structured way. We are reinforcing the teams there because we have acquired more companies that require an even more structured process than what we used to have. So we are investing in that as well to be able to capture this value that we believe in, prior to the acquisition. So I think we are happy with the companies, as there are a lot of activities. Here's one challenge we see: we want to integrate some items quite quickly.
Okay. We are reinforcing the teams there because we have acquired more companies that require an even more structured process than what we used to have.
The next question comes from Sebastian Kwan from RBC. Please go ahead.
Yes. Thank you for taking my follow-up. I have a question regarding the mention of lower volume as one of the key reasons for the lower margin. But at the same time, we have competition based in Japan like Ebara. You have Busch in the US and Pfeiffer in Germany. Is the price situation in the global vacuum pump market stable? Or do you see pressure from manufacturers in lower-cost countries effectively? We are reinforcing the teams there because we have acquired more companies that require a much more structured process than what we used to have.
What is key for the price development is technology. We need to continue to develop our products to come up with better products, to be able to exercise some pricing power. And I think that's our focus. And we will continue to develop the products that can deliver superior value to our customers. And that could help us with our price efforts. So, I think that's where we are focused now.
Okay. So, no change in pricing, okay. We are reinforcing the teams there because we have acquired more companies that require an even more structured process than what we used to have.
The next question comes from Magnus Krüger from Nordea. Please go ahead.
Hi, Magnus. Here again, just reverting to some of these announcements that have been in the media over the past couple of months with respect to some big framework agreements, particularly on the memory side. Is there any way you can sort of help us scope what these opportunities could mean to you if they come to fruition over the coming years? How can you frame them, for example, in respect to how big that potential is compared to your legacy business?
What I can say about the market is that we know all the players in the US, Asia, and China. We are involved with all these players. We have a good position with most of the players. If this comes to fruition, we will be there to capture. I think that is our main focus. We don't know which one we will scale up first or later; that we don't know. I think the most important aspect for us, which also gives us confidence, is the fact that we are very well positioned. Any movement, we will be able to capture.
Understood. Thank you. Can you ask an additional question? You talked a little bit about ramping up spending on R&D in Compressor Technique going forward to drive additional growth? Is that sort of a China-focused initiative, or could you highlight a little bit on how much you would be willing to invest and in which pockets?
I would say the investments were more in capabilities within facilities, better places where they can test the machine testing environment. So, we have created those capabilities and increased them. Actually, we always had these capabilities, but we have increased them in China. And I think we will continue. This is not a dramatic increase in R&D for Compressor Technique. They have been focused, and they will continue to remain focused. But I think we can get more out of our Chinese organization. That's what we are doing, getting ready for that.
Got it. Thank you so much.
How can you frame them, for example, with respect to sort of how big that potential is compared to your legacy business? Thank you very much, Magnus, for that question. And actually, with that, we have also answered the last question on the call. I would like to thank you all for your presence and for listening to our presentation. As always, of course. Should you have any further detailed questions on any of the business areas or the group overall, you are more than welcome to contact our IR department. As always. Thank you very much for attending and have a great rest of the day. Thank you. Goodbye.



















