Inderes’ Disclaimer can be found here. Detailed information about each share actively monitored by Inderes is available on the company-specific pages on Inderes’ website. © Inderes Oyj. All rights reserved.
Read transcripts of webcasts and audiocasts
Read transcripts of webcasts and audiocasts
Disclaimer: This is a machine-generated transcript and may contain inaccuracies.
Hello and a warm welcome to the Epiroc Q1 results presentation. My name is Colin Lawson. I'm head of IR and media here at Epiroc and by my side, I have our CEO, Helena Hedblom, and our CFO, Håkan Folin. As always, they will briefly present the results before we do a Q&A session. You all know the drill. Helena, please. The stage is yours. Thank you.
So thank you, Corinne. And a warm welcome to all of you. So before I dive into the Q1 results, I would like to mention a highlight from earlier this month in April when we announced our largest ever order contract. So the contract size is 350 million AUD, about 2.2 billion kroner over five years. And this is not only a large contract. This is the future of mining making its entry in full scale, so we will provide a fleet of more than 50 machines, fully autonomous and electric, to Fortescue in Australia. And the machines we will provide are the cable electric Pit Viper 271 E and the battery electric SmartROC D65 BE. And if you joined us at Minexpo in September, you might have seen the machines. So once the fleet is fully operational, it will reduce CO2 emissions by 90,000 tonnes annually while also boosting safety and productivity. So well done to everyone involved, and thank you Fortescue for your trust in Epiroc. So coming to Q1 and highlights from the quarter. So the mining demand was strong and equipment orders were very strong. We experienced a 29% organic increase. We won 600 million in large orders, compared to 400 million in Q1 last year and 820 million in Q4. So among these orders here in Q1, we had a large one of 280 million from Hindustan Zinc for underground trucks and rigs. And we had a large battery fleet order as well, 100 million from Hudbay Minerals in Canada. On the infrastructure side, demand was more mixed. As in the previous quarter, we enjoyed strong demand from customers engaged in civil engineering and tunneling projects. We also won a major contract to support the Western Harbour Tunnel project in Sydney, Australia. That said, we did experience a positive sequential seasonality trend for attachments in the quarter. In the quarter, we increased both our revenues and our operating profit. Our revenues were up 10% to 15.5 billion, of which 3% was organic. Our adjusted EBIT increased by 7% to 3.1 billion. And if we look at the demand picture in Q1, orders received were strong both year on year and sequentially compared to the previous quarter. They increased by 17%, of which 10% was organic. So this is the strongest organic growth in three years. Very pleasing to see. And it was driven by strong mining demand. Moving on to our strategic focus areas, and first out is innovation. So during the first quarter, we spent quite some time preparing for Bauma 2025. The world's largest construction trade show was held in Germany at the beginning of April, and at the fair, we showcased many exciting products for use in construction, recycling, quarrying, and tunneling. So we have a strong offering and a position in the construction niches where we operate. Following the acquisition of R.D. Following the acquisition of R.D. Mining Equipment in 2023, we have successfully integrated a new product family of reliable, durable, and high-performance underground utility vehicles into our portfolio. And we have a strong demand for these utility vehicles, which are included in our Terra series. And speaking of a strong offering, let me bring you to the topic of automation. Do you remember our collaboration on an automated mixed fleet in underground operations that was announced in 2021? So let me show you a short film about the achievements.
Never before have we integrated other OEMs into the same system and multiple tasks, allowing us to complete every activity on our extraction level autonomously, without putting people at risk. The teams should be incredibly proud. The project started in 2008. Our ore body is 1200m to 1400 meters deep. Block caving provided us with a mining method allowing us to mine a large ore body at a relatively low cost. If we can mine at the right cost and keep our team safe, we have the potential to remain here for decades.
Block cave mining is a method where they use a drill and blast technique, and they fragment the material, which will then propagate and fall down under its own weight and gravity from an undercut level.
We need automation to be able to remove our people from the hazard of underground inrush. And if it wasn't for automation and the systems that we've developed alongside Epiroc, we wouldn't be able to recover all the ore safely.
It's one of the first sites in the world to have multiple vendors operating within the same agnostic automation system.
So the main benefit of deep automation now is to remove people from the hazardous area. But other benefits for the operators are they're not sitting inside a cabin exposed to dust and vibration for 12 hours a day. They're sitting in an air-conditioned office.
I've seen the average performance from Panel Cave one, which is our fully automated level, improve, and I've seen the record daily tonnes increase as well. It's almost every month. Every second month, we hit a new record. You see the average change in it. And it's really through this great collaboration and great people that we've been able to do that. Epiroc has really helped us to continuously innovate and improve the system. Working at Cadia is really special for me. I get to work at Australia's biggest underground mine. I get to utilize these great tools and technologies, such as the Epiroc automation system, and be home every night to see my kids, which is really exciting for me. I can't wait 5 or 10 years to see what our underground mines look like, or how we operate them.
So it's great to see customers confirming that our mixed fleet automation solutions are working well. Moving on to the next strategic topic, the high mining activity supported demand for both services and tools, whereas the weak construction market impacted the demand for attachments compared to the previous year. In total, the aftermarket represented 67% of our revenues in the quarter. Same level as last year. But within the aftermarket, the tools and attachments portion is higher than in the previous year, which obviously has an impact on group margins, which Håkan will talk about later on. So moving on to operational excellence then. Given the recent political developments and uncertainty around tariffs, I would like to emphasize that we have an agile, fast-paced, and global organization. So we work on what we can control and adapt when conditions change. So we are closely monitoring market developments. And we have already started to optimize logistics and distribution flows, leveraging our global manufacturing footprint and exploring alternative suppliers, as well as discussing potential pricing impact with our customers. And also, just like in previous quarters, we have efficiency actions implemented and ongoing, and they proceed according to plan. On the sustainability side, we have only positive news to share. By relentlessly focusing on an improved safety culture, we have reduced the total recordable injury frequency rate. Further, we have also increased the proportion of women in the group to 20%. On the management side, we are even higher. 24.5% of our managers are women. And let me share another positive example. In India a few years back, the share of women employees was in the single digits, and today we are already approaching the group level of 20%. In fact, in our new tools and rock reinforcement manufacturing site in Hyderabad, India, we have only women employees in production. So over and over again, I see positive results from diverse teams within Epiroc. By mixing employees from different parts of the world with different education, age, religion, and gender, we can see firsthand that we have become more creative, more innovative, and as a result, also created better results on the planet side. We are also making good progress. Our CO2e emissions from operations were reduced by 11% thanks to a higher share of renewable energy purchased. Installation of solar panels on our own facilities and energy efficiency activities in facilities and processes. CO2 emissions from transport increased by 3%, driven by higher volumes delivered. And with this, I leave the word to Håkan to cover the financials.
Thank you. Helena. Our revenues came in at 15.5 billion, corresponding to an organic growth of 3% and our operating profit. The EBIT increased 12% to 3.1 billion. It includes 11 million of provision for our long-term incentive plans. Last year, we had M&A-related costs of 125 million. And looking to the right of the slide, our adjusted operating profit increased by 7%, but the margin decreased somewhat to 19.9%. The margin development, if we look at this adjusted bridge, was supported by currency. And this is driven mainly by a positive currency impact on internal profit elimination. While the organic contribution was negative, it was mainly explained by mix effects, such as a lower share of service revenues, as Liliana talked about before. Last year, our service revenues represented 46% of the group revenues, and in this quarter only 43%. A few comments. Also on the sequential development, we observe a positive profit development both organically and from acquisitions in this quarter, which exceeds the improvement explained by the efficiency actions we have taken. Dilution from acquisition this quarter was -1.0 percentage point, which is an improvement from Q4 when we had -1.4 percentage points. If we then move into the segments, we start with equipment and service here. Orders received increased by 12% year on year, all of which was organic. It was mainly driven by equipment, which grew by as much as 29% organically, supported by the large order in India, which Liliana mentioned. And again, our large orders amounted to around 600 million. We also have growth in service, but at a somewhat lower pace. We are not worried about the somewhat lower organic growth rate in service this quarter. We know that the fleet is older, and it's larger than ever before. The mines are producing the minerals to which we are most exposed, such as gold and copper. So over time, we expect to see continued good growth in the service business. Also, if we look sequentially for orders, you see we had a good development, with 5% organic growth. Revenues for equipment and service amounted to 11.7 billion, which corresponds to a good organic growth of 4%. And the organic growth of equipment and service was 8% and 2%, respectively. The share of revenues from service within this reporting segment was lower this quarter, at 57% compared to 58% this year, explained by the strong equipment growth. Still, we managed to increase our operating profit by 9%. The adjusted operating margin improved to 23.2%, supported by currency. And as I said before, also on group level, the positive driver was FX impact on internal profit elimination, mainly in service. The organic contribution was slightly negative, which is explained by the service mix having both a lower share and achieving the strongest growth in parts of the business with somewhat lower margins. Also, for the segment here, a few words on the sequential development. The profit margin was somewhat weaker, which is mainly explained by the strong invoicing that we enjoyed in Q4. And if we look historically, the invoicing is more or less always somewhat lower in Q1 than it was in Q4. If we then move on to tools and attachments. Year-on-year orders increased 2% organically. Mining activity remains high, and demand from construction customers is challenging sequentially. However, it was a positive seasonality supported by demand for attachment, driving the organic growth of 10%. And then the big question is, does this mean that the weak construction market has turned? Well, we would be very careful in making that conclusion. Yet it is still a challenging construction market, although we are seeing the destocking phase that we have talked about for a while now among distributors coming to an end. In the bridge, we see a positive 32% from the structure, and this is mainly due to Stanley Infrastructure. They came into our books on April 2nd in 2024, which means that Q1 now was the last quarter when you will see this acquisition as part of structure. And let me give you a brief update on what has gone well and what has not gone so well during the first year. Now, with Stanley Infrastructure on the positive side, the strong customer relationships that we expected have been proven. We have gained access to an indirect sales network with more than 2,700 dealers, and we see that there is a good cultural fit with a strong focus on innovation. But then on a not so positive side, well, the end market has of course been weaker than we first anticipated. And this has impacted both revenues and earnings. We have taken actions in response to the market weakness. And for example, we consolidated three manufacturing sites into one. Long term, we are still certain that this is a good fit for Epiroc. We have a strong market position in specialty attachments with industry-leading brands. And once the market turns, we are ready to leverage our global sales efforts with a multi-brand strategy. Back to the numbers then. Revenues and profit for tools and attachments increased 29% to 3.8 billion, driven by acquisitions. Both Stanley, as mentioned before, and also ECB Plus. The organic decline was 3% in the quarter. Our EBIT increased by 38%, and we had no items affecting comparability this year. But last year we had M&A-related costs of 125 million. Our adjusted EBIT was flat and the adjusted margin declined from 15.6% to 12.1%. Currency impact at the margin was positive. While lower revenues and acquisitions were negative, the dilution from acquisitions included in the structure was -2.8 percentage points on the adjusted margin, mainly related to the acquisition of Stanley Infrastructure. Sequentially, we had an improvement with lower dilution. We had a decrease of 4.0% in Q4. We now no longer have the inventory step-up value from Stanley. And again, the consolidation of sites and the other efficiency actions we have taken are now starting to show. Okay, getting back to the group again and looking at cost, net financials, and tax. In total, our administration, marketing, and R&D costs increased year over year. Admin costs increased, but we had some temporary costs related to efficiency measures. Excluding this, admin costs were actually down both year over year and sequentially. Marketing and R&D costs increased year over year, yet they were down sequentially. We had net financial items of -207 million, an increase mainly driven by higher interest, netting at 107 million, versus 128 million the previous year. For tax, our tax expense was 685 million, which corresponds to a tax rate of 23.8% for the quarter. If we turn to cash flow, our operating cash flow came in at 1.6 billion, compared with 1.8 billion last year, supported by the increased profit. But we had a buildup in net working capital and also currency, which impacted negatively. Still, if we look at cash conversion, which we measure as rolling 12 months, we are actually at 100%, meaning we at Epiroc have almost always been a very strong cash-generating company. If we then dive into a bit more detail on working capital compared to the previous year. Net working capital decreased 3% to 22.7 billion, which is 36.9% of revenues in absolute terms. And if we exclude currency and M&A, the working capital was roughly flat and the changes in each of them offset each other. Our inventory amounted to 18.3 billion, which is the lowest level in many quarters. As we have talked about before, we work hard on reducing inventory and becoming more efficient in working capital management. And if we look sequentially, the average net working capital in relation to revenues decreased. Finally, a few words on capital efficiency before I hand back over to Helena. We ended the quarter with a net debt of 12.3 billion and a net debt to EBITDA ratio of 0.76. So, we do have a very strong financial position entering into this year. Return on capital employed was 20.3%, which is down from 24.5%. In the previous year, we were negatively impacted mainly by increased intangible assets such as goodwill from acquisitions. And a small reminder: on May 8th, which is next week, we will host our annual general meeting. The board has proposed a dividend of 3.8 krona, to be paid in two installments, with the first half being paid now in May, and this corresponds to a 53% payout ratio. So thank you. And Helena, over to you.
Thank you. Yes. To summarise the start of the year, it has been good. We have seen a strong mining demand with organic equipment order growth being very strong at 29%. On the infrastructure side, the demand was more mixed for equipment used in larger infrastructure projects such as tunnelling. We had stable demand, whereas the demand for attachments used in construction work remained weak. In the quarter. We also increased both our revenues and our operating profit. So many positive things we have spoken about today happened also after the end of the first quarter, and I'm again proud to mention that we won our largest contract ever, 2.2 billion over five years for a fully autonomous and electric fleet in Australia. So this is really an achievement. So with this great start in Q1, Q2, then what can we expect onwards? Well, given the demand we see now, we expect that the underlying mining demand, both for equipment and aftermarket, will remain at a high level. Or as I sometimes say, the business is cooking and the potential for large orders looks good. Additionally moving forward. The construction demand is, however, expected to remain weak. I think that we can all agree on that. The general market uncertainty makes it harder than ever to predict the future. So I would like to emphasize what I said before that Epiroc is an agile, fast-paced, and global organization, and we are used to working hard and adapting when conditions change. So thank you. And now it's time for some questions. Right.
Thank you. Helena. Thank you. Before we start the Q&A session, I would also like to highlight something that makes me very proud. On April 24th, we launched our sponsored ADR Level One program with Deutsche Bank. And this is to facilitate for all investors globally to invest in Epiroc in a more cost-efficient way than trading the unsponsored shares that we had before. So now it's time for Q&A. And as always, try to keep your questions short and concise. And operator, please open the line.
If you wish to ask a question, please dial the Pound Key on your telephone keypad to enter the queue. If you wish to withdraw your question, please dial the Pound Key on your telephone keypad. The next question comes from John Kim from Deutsche Bank. Please go ahead.
Hi. Good morning. Thanks for the opportunity. Two questions, if I may. First, India. Can you give us a bit of color on service order growth and revenues? The underlying segment's growth rates appeared notably weak in Q1. I understand the Q1 comparison a year ago is a bit unusual. But any color there would be helpful. Between retrofits and things like consumables, and the second question on tools and attachments. When we lap Q2, you will have owned Stanley for about a year. I think it's fair to say that, given tariffs and macro uncertainty, there are probably more headwinds than you anticipated. When will you start thinking about cost and right sizing for the asset? Thanks so much.
So now time for Q&A. So, if we start with the service order side. So, of course, it was quite tough making comparisons compared to the previous year. But if I look at the underlying activities, they are strong towards the different large commodities we are exposed to. If you take both copper, gold, and iron ore, we have seen some weakness in nickel. So, some mines focused on nickel ore have been put under care and maintenance. So that impacts a little bit. I would say the growth there in the quarter. We also have some, to be quite specific, challenging situations in the northern part of DRC which also had an impact in Q1, where some mines are under care and maintenance due to the unrest in that part of DRC. But if I look, generally speaking, at the components within services, yes, we are growing faster in service contracts and some of the service products than we are in parts this quarter. On the other question there, on Stanley. Yes, it's one year since we have had them integrated into Epiroc, and we are very focused on making sure that we prepare ourselves for the uptick in the market. So the last, I would say, nine months, we have been very focused on making sure that we work on the efficiency side, both when it comes to consolidating sites, but of course, also leveraging the full potential now with the presence and strength of Epiroc in the rest of the world. So I do not see that the latest development related to tariffs will impact this in a particular way. I think we have a very strong manufacturing footprint and capabilities in many parts of the world for these types of products.
But if I look, generally speaking, at the components within surveys, yes, we are growing faster on service contracts and some of the service products than we do on parts in this quarter. But if I look, generally speaking, if you look at the components within services, yes, we are growing faster in service contracts and some of the service products than we do in parts this quarter.
The next question comes from Klaus Berglind from Citi. Please go ahead.
Hi. So my first one is on tools and attachment. And Stanley, it looks like good progression, high single-digit EBITDA margin in the quarter at Stanley, just to confirm if that was a clean margin or if you had any one-offs and write-downs this quarter. Just trying to understand if the underlying margin was even higher, fully adjusted, and if you could tell us what you see in terms of inventories in the channel for Stanley in the US at the moment. Others have talked about the normalization from the second quarter, and I wonder if you are seeing the same thing.
It's a clean result, so there is nothing extraordinary in Q1 in the performance of Stanley. It was extraordinary in Q1 in the performance of Stanley. I think what we see is the effect of all the efficiency actions that we have taken in the last, I would say, three quarters. So it's trending in a good way. We do see, as Håkan mentioned, that the inventory levels are coming down to more normal levels, meaning that it's, I would say, the true demand we start to see in our factories, which helps with the absorption. So, that has been one of the main challenges during the last year, I would say, both for our attachment business in general, with the low volumes observed. So, you know, that is a good development that we're starting to see these inventory levels coming down to normal levels.
Good. My second one is on the mixed impact on 4% organic growth, but no drop through to EBIT. The share of service was lower by one percentage point. I get that, but I'm still a bit surprised to see this quite a big impact in the bridge. You obviously talked about the internal mix in service being negative with contracts, modernization, growing costs, and parts. Your parts business is a big chunk of your service business. It's still facing this tough comparative as you showed at market day, but eventually, this should obviously turn around when inventory levels at the miners are sort of stabilizing. I just want to hear sort of when you look through the year and I know that there are some, you know, you talk about things going on in Africa, but that's clearly an upside potential with the parts business coming back.
Yeah. And I think we are also putting a lot of machines on the market. I think over the last couple of years, we've been putting more and more machines on the market. So the fleet continues to grow bigger with each passing quarter. It's also a fact that during the first one to one and a half years, a new machine is not consuming that many new parts. It's in the later stage of the equipment's age where the big part consumption starts. So, you know, the more we grow on the equipment side, you know that there is an upside, of course, long-term on parts.
And within the.
Service part of the margin.
If I can add there also on the service mix, it's not only the traditional parts and service business that's included in service, it's also the digital division that's included in service, as I'm sure you know, closely. So that's also impacting, of course.
My point is that parts with the highest margin should positively impact the mix when it comes back. Yeah. Sorry.
Yes, absolutely.
All right. Thank you.
The next question comes from Michael Harlos from Morgan Stanley. Please go ahead.
Good morning. Thank you for the presentation, and thank you for taking questions. The first one would be on foreign exchange. Obviously, currencies are hard to predict, but what kind of headwinds should we take into account for the rest of the year? And then, uh, if you could, at the group level, update us on cost savings, if you could comment on where we are and what's left to be done, that would be very helpful. Thank you.
Okay. If I start with the first question, and I think we actually prepared a slide for this because there have been quite big swings during the quarter. Uh, and not the least for the Swedish krona, which actually at the end of the year, it was 11 Swedish krona towards one US dollar. And at the end of Q1, it was basically ten. So we saw almost a 10% difference. And for those of you who have followed us for a while, you will recognize this slide from our Capital Markets Day, where we show how different components are impacting the effects. Because we fully understand that it is quite difficult to predict, the one that is a bit easier to understand and predict, I would say, is the lower part. On the transaction side, this is very much related to the revaluation of outstanding accounts, receivables, and payables, meaning that if we sell something, for example, from Sweden in US dollars and then the krona strengthens as it has during this quarter, and we have outstanding accounts receivables, they become worth less in Swedish krona, and therefore we get a negative impact. The one that is maybe not that obvious is the top one, which we call translation, and especially internal profit. So again, if we sell something, let's say a spare part from Sweden to a distribution center in another part of the world, and it's sold in US dollars, we do have a profit in Sweden, but since we haven't sold it yet to the external market, we need to eliminate that on a group level, of course. And then if that's a different currency than the Swedish krona, we have an FX impact. And if then the currency moves as it has done, And in this case, the Swedish krona has strengthened, meaning there is less profit that we need to eliminate, and therefore we get a positive impact in the quarter on the balance sheet. And in this quarter, you see really big swings. I have never seen such significant swings for us. So, it's -248 on transactions and then plus 516 on translation. And then in total, that gives us a positive impact of 268 million Swedish krona. And then the second one.
The second one on cost savings. So we continue our efforts when it comes to efficiency. So, if we look at it compared to a year ago, we are 1,000 employees fewer today. And we continue these initiatives. So there are more things in the pipeline when it comes to efficiency initiatives, but also some of the closure of manufacturing sites that we have announced. We have not yet seen the full effect of, for example, the closure of Essen. That is still not seen fully in the results.
Thank you. That was very helpful.
The next question comes from Chitrita Sinha from J.P. Morgan. Please go ahead.
Good morning. Thank you for taking my questions. I have two, please. So firstly, just an ONS. The order intake excluding large orders was clearly very strong at 5.1 billion. So how should we think about this going forward, especially in the context of your guidance? What are you seeing in the pipeline?
So if I start then. So yes, it's a high. Even if we exclude the large orders, it's a strong activity level out there. We see a lot of replacement orders of fewer machines in more or less all parts of the world. And we continue to see that the pipeline looks good. So it's both a strong pipeline when it comes to replacement of the existing fleet, but also a strong pipeline of large orders. And that's why we guide like we do here short term. So it looks solid.
Thank you. And then just on TNA, I wanted to check if there was any pre-buy impact that you saw in the US.
No, I wouldn't say that we have seen anything like that.
So how should we think about this going forward, especially in the context of your guidance? Thank you.
The next question comes from Edward Hussey from UBS. Please go ahead.
Hi, Helena and Håkan. Thank you for taking my question. I guess, just the first one on tariffs. Could you just please talk us through the direct and indirect effects you expect? Um, and maybe some degree of quantification around that. Thank you.
Yes. So, we are not, let's say, quantifying the effect. But of course, there is an impact. So we are busy with mitigating actions, such as redirecting distribution routes, for example, from Europe, not going through the US and then into Canada, Mexico, or South America. We're going direct instead. We're also leveraging our global footprint when it comes to manufacturing because we have dual capabilities for many products. So that is, of course, also something that we can now very quickly put in place. We're also changing suppliers and utilizing our suppliers' global footprint to mitigate the impact from the tariffs. So I would say, of course, it's a changing environment. But the organization is fast-paced when it comes to making very tactical decisions like this to mitigate the impact.
Okay. We're also changing suppliers and using our suppliers' global footprint to mitigate the impact from the tariffs. And just going back to Carter's question on Stanley margins. I calculate that if I exclude the 20 million inventory effect that roughly occurred in Q4, we saw a 7% increase in adjusted EBIT margins quarter on quarter. Um, you did mention some one-offs in Q4, but the implication was perhaps they were quite small. Um, I mean, that's a significant change in margins from acquisitions. So do you mind just sort of outlining what you think the trajectory is from here? And also, again, just digging into where that significant uplift came from. Thank you.
Um, well, I wouldn't maybe call it a massive uplift. It was definitely a clear improvement. And you're right about this. The step up that we no longer have. And then we had a few one-off items also in Q4 that we did not have again in Q1. As we said. On top of that, the efficiency measures we have taken include, for example, the consolidation of these three sites. We also looked into a lot of other areas to adjust our operations to a clearly lower demand level than it was when we acquired Stanley. So all these efficiency measures have now started to show in the results during Q1. We're still not receiving support from the market as of yet. That might come, or it will come sooner or later. We don't know exactly when it will come, and when that comes, then obviously we will get an improvement in margin as well. So there was nothing specifically positive in Q1, I wouldn't say. Rather, if we get help from the market, we will definitely see improvements. To put it that way.
Cool, thanks. And then just a final question, just on the dynamic in the US. So, I mean, we've seen an announcement from the White House that ten mining projects have been earmarked for accelerated permitting. I mean, in the sort of midterm, I guess, can you see a sort of more positive environment in the US? I mean, clearly, there are headwinds in the short term due to an unknown NPV in the mine calculation and uncertainty about how much CapEx is going to be.
But, you know, we see these types of initiatives actually in several parts of the world with fast-tracking mining permits, etc. And I think raw materials, you know, are becoming a very strategic element in this geopolitical landscape to safeguard your sourcing capabilities. It's both in us. So, of course, for us that is good news. It's both in the US. It's both expansion projects of existing mines, but also in other parts of the world. We start to see more and more activities around greenfields, so that, you know, all in all is, of course, positive for us.
Okay. Thank you very much.
Um.
The next question comes from Gustav Schwenn from Handelsbanken. Please go ahead.
I mean, in the sort of midterm, I guess, can you see a sort of more positive environment in the US? Hello. Thank you. Um, can I ask another follow-up on the margin? Can you mention that you no longer have the inventory step-up effect? That was in the range of 20 million. But looking at amortizations now, quarter over quarter, they're only down by 2 million. So have I misunderstood this or is there something odd in Q1? Um. Thank you.
No, nothing odd in Q1. This inventory step-up value, you would not see it as amortization because, basically, what happens is that you revalue your inventory. So, if the inventory was first valued at eight and you were expecting a selling price of 12, you would get a margin of four. But then when you revalue it, maybe let's just say it was worth ten instead. And when you sold it, you only got a profit of two, so you will not see it as amortization; it was part of a higher cost of goods sold.
Okay. Perfect. Thank you.
The next question comes from Vlad Sergievsky from Barclays. Please go ahead.
Yeah. Good morning. Thanks very much for taking my two questions. First one is on inventories. How do you expect inventories to evolve from here, perhaps through the rest of the year, and does this current uncertainty incentivize you to actually hold a bit more inventories during this period. And the second question is on the adjustment to tariffs. Eleanor, how long do you think it will take you to fully adjust the organization to the new realities? Is it a question of a quarter or two, or is it longer?
If I start with the inventory part, if we disregard, which you obviously can't, but if we disregard the overall trade situation right now, we would expect to continue to move the working capital over sales ratio downwards during the year because we still think that we have improvement areas there. Now, the trade situation complicates things a little bit because, as Selena mentioned, we are redirecting flows, and sometimes we are redirecting them. We are redirecting them to achieve lower costs. But it might actually imply that we need to have some higher inventory in different parts, or we get longer lead times because we want to avoid different routes. So. So, all in all, there is still an opportunity for us to improve inventory management and become more efficient. The very fluid trade situation makes it a bit more complicated.
And on the, what I would say, the timing for all these mitigating actions. Of course, it depends very much on the different types of mitigating actions. If it is just rerouting flows of parts, for example, or consumables, that happens immediately. So that's not, you know, there's no need to wait for something like that to happen. If we have dual capacity possibilities to move production between sites, then I would say maybe it's a quarter to get something like that in place. If it's to find new suppliers, as long as it is standard steel grades, it also goes fairly quickly. It also goes fairly quickly. But of course, it's more that it's a lot of workload for the organization. And that's what the organization is focused on right now. But as it looks like right now, it's a full activity level. And I think we have over the years proven that we are agile and fast when the situation changes, and we are now maximizing our potential here with our global footprint and our global sourcing network as well. Several of our suppliers are also located in many different parts of the world. And we can, of course, utilize those suppliers in the best possible way. Now to mitigate the impact from the tariffs.
Thank you very much.
The next question comes from James Moore from Redburn Atlantic. Please go ahead.
Yes. Good morning, everybody, and thanks for the time. Um, could I start with equipment, please? Um, a strong quarter, I think. The best ever or for a long time on equipment. Can you maintain this current level in the coming quarters? Um, or is it exceptional? Um, and the second question is on service. The softness in nickel and DRC and parts. Do you think that's temporary and will reverse quite quickly, or something that's going to drag on for the next quarter or the next two quarters? Maybe we could start there.
Yeah. So, as I said on equipment, it's a very strong quarter. And it's both a number of large orders, but not that many large orders actually supporting this very nice demand. So it's mostly medium-sized and small orders, and many of those, which is very encouraging to see. We continue to see good opportunities in the coming quarters for equipment demand as well. And I said, I think I mentioned it in the previous calls as well, that the replacement of some of the large fleets that we put into the market in 2011 and 2012, those are coming up for replacement. And those are quite big-ticket items for the large surface machines. When we have demand and leverage our very strong position in surface mining. So we continue to see that this is a positive outlook for equipment and parts. Yes. We, you know, as long as nickel is where it is from a price standpoint and the turbulence in DRC, hopefully the turbulence in DRC is coming to an end, you know, it's already now. Looks better. I don't dare to predict where nickel will go. We will move forward. But there are plenty of opportunities. Of course, as you know, we have a strong position in parts and in our service. And the more we grow our service contracts, the more we are building the foundation for parts growth in the long term. And as I said, some portions of the fleet are also quite new because we've introduced a lot of equipment to the market in the last couple of years, so they're not yet consuming many parts.
That's really helpful. Can I just ask you a bit about price? Is the price level in orders in the quarter, um, similar to what you've seen in recent quarters? Um, and if there's any way you can quantify that, how will that move in the coming nine months? Will it move up materially with the tariffs? Um, and is there any way you can quantify that or do you anticipate it not really moving that much at all?
So, I would say that the price effect we see in Q1 is similar to what we have seen in the previous quarters. It's more of a normalized price increase level that we normally see. Uh, we are doing everything we can to mitigate the effect from the tariffs. Uh, as I explained. But, if there is a part that we can't mitigate, then of course that will end up in price increases, but we're doing our job to mitigate the impact before we push it on to our customers.
I understand. Will continue to move forward. Thank you, Helena.
The next question comes from Benjamin Helan from Bank of America. Please go ahead.
Yeah. Morning. Thank you, guys, for taking the question. First, uh, is on, uh, the US construction exposure. I was just wondering if you've seen any changes in ordering patterns since the tariffs were implemented on April 2nd. And whether you've observed any changes in behavior there. From James's question around pricing. But service contracts have obviously grown quite significantly over the past three to four years. Can you discuss your ability to pass on price increases through service contracts compared to parts? I mean, my understanding of the way these service contracts work is that there's indexation, but sometimes that indexation can be capped. I was just wondering if that's a situation that you guys will face. And so it will be over a number of years that you pass on any potential price increases, as opposed to perhaps with parts. You can pass it on quite quickly. Just any insight there would be super helpful. Thank you.
Yeah, I would say on the US construction, sentiment remains steady. We have not seen any, let's say, change in the last couple of weeks. Uh, since the, I would say, you know, in regards to the tariffs, as I mentioned, we do see that the inventory level at our distributors is coming down to a more normalized level. So that's what I can say on the construction activities in the US. Uh, so it is a way of making sure that we get the full potential of parts into a contract. But I wouldn't say that we are. I would say we are similar. Similar position when it comes to working with prices. Because in a service contract, you work with value in a different way because that's where you can prove the values and you can prove the KPIs, which is then uptime or TCO, etc. . So you have more things to work on in a service contract than you have if it's just pure parts.
I mean, my understanding of the way these service contracts work is that there's indexation, but sometimes that indexation can be capped. I mean, my understanding of a lot of the way these service contracts work is that there's indexation, but sometimes that indexation can be capped. Clear. Thank you.
The next question comes from Anders Eidsborg from ABG. Please go ahead.
Yeah. Morning. Thank you. Uh, I had two questions on digital. Could you help us understand the mechanics behind this dilution? You know, how much did digital grow in this quarter? How big a proportion is it and what's your margin ambition this year? Do you think margins for digital standalone will go up, remain unchanged, or decrease? I understand that this is a business that will sort of just gradually ramp up to higher profitability, but any help there would be good.
So, if you know, we said it when we reported Q4 that in 2024, we're up roughly 30% on orders for digital. We have not yet fully seen it reflected in the P&L, which of course is about scaling. We have acquired regional players, and we are now scaling our operations. Of course, margins will improve. On top of that, we're also working on efficiency measures to ensure that we have the organization fit for growth, but also fit for the long-term, delivering the profitability that we expect.
Yeah. Okay. Um, secondly, so we saw this deal early in the year with Micromine in mine software. Uh, I think you've said previously that you're pretty happy with the platform that you have on digital, but could you just give us some more details on what you do in those specific areas, or if you need to do or want to do more bolt-ons? Thanks.
I mean, we are happy with the platform. So, we have acquired quite a number of capabilities now. During the last year, we were putting all of this together into a very precise offering. And it is that full offering now and the bundling of all the solutions. And of course, we're developing new solutions based on the capabilities that we have now received from these acquisitions. So we see that we have a good development journey now organically within the digital. And we already see it in the orders received, as I said. But there could still be, of course, gaps that we would like to close from an acquisition standpoint. But I think right now I'm pleased with the portfolio that we have and the development of orders. We see that we are providing our customers with the solutions that they need for the future.
Do you think margins for digital standalone will go up, be unchanged? Do you think margins for digital standalone will go up, go up, or be unchanged?
The next question comes from Andreas Koski from BNP Paribas Exane. Please go ahead.
Thank you and good morning. So, can I first ask about the costs related to the efficiency measures that increased admin costs temporarily in Q1? How large were these costs? Will they disappear in Q2? And should I look at them as items affecting comparability?
Uh, they were not super large. Uh, basically, you know, there's a bit of an echo here. Sorry. Um, in a big company like ours, we always do something; if we have a larger cost item, like when we close the factory in SM, then we take them as items affecting comparability. If we have smaller ones, which occur every now and then, we treat them as normal costs because we will encounter them fairly often this quarter. You know, they were somewhere in between. They were not big enough to be treated as items affecting comparability, but a bit bigger than what we normally see, and that's why we spell them out explicitly.
If you don't want to quantify them.
No, but they were not. They were not huge then.
And should I look at them as items affecting comparability? And should I look at them as items affecting comparability? And then the second one, I know it's moving material and it's probably difficult for you to estimate as well, but could you please give us an indication of what we should expect from P&H on EBIT in Q2, either based on current rates or the rates that we saw at the end of the first quarter?
Hmm. That's a very good and quite tricky question. Uh, to make it very simple, if the krona is, uh, a weaker krona, if the krona continues to strengthen like it did in Q1, then you would have a similar impact in Q2 on the balance sheet revaluation items. You would then have a negative effect on R. And so far, the krona has strengthened. In Q2. You would have a negative effect on R, but you would have a positive effect higher up on the income statement from the gross margin due to these internal profit eliminations. Over time, however, those are the balance sheet implications. Over time, though, a stronger krona, when we translate back the profit that we get around the world, makes that profit smaller. So it then becomes negative for us. But it's when we have this specific situation. So if you put it like this, if the currency rates were exactly the same as they were at the end of Q1, then you wouldn't have any of these revaluation effects, and you would then have less profit translated back into Swedish krona. But if the krona remains strengthened as it is now, it's likely that you will see a similar type of effect as you saw in Q1. Did that make sense, Andreas?
It makes sense. But I was looking for a number. But thank you very much.
The next question comes from Christian Hinduja from Goldman Sachs. Please go ahead.
Yes. Morning, everyone, and thanks for the time.
I just want to come back to the outlook statement; you talked about optimizing logistics and distribution flows in response to some of the tariff uncertainty. If I recall correctly, your logistics cost line fits into admin expenses. And historically, maybe it's been about 2% of revenue. That would imply about $310 million for the quarter. Obviously, we've talked about the step up in admin costs, with some of that being one-off. But 1.2 billion is 100 million up versus consensus, last quarter, and last year. So I guess there are two parts to the question. You know, what are the specific actions you're taking amidst the trade environment that are affecting logistics? And is that structural? And then second, um, you know, on the one-off side, is the one-off effect more meaningful than the increase you may have seen in logistics expenses? But thank you very much.
So we say the work we have done so far has not led to increased logistics costs, but we are rerouting. So we're using different routes than we did prior to the tariffs. You know, to be very transparent, we are avoiding going through the U.S. and then out from there for parts, for example, which we are no longer doing. But that has not translated into an increase in logistic costs. Of course, if we were to start changing our logistic footprint in any way moving forward, then that could indeed come with a cost. But that is not the type of actions we are taking. We're using the existing footprint in a smarter way given the tariffs. So the one-offs are not related to logistics, I would say.
And in the admin, if you look at the admin cost, Christian, and you compare Q1 this year with last year, you should also remember that we have, of course, added Stanley Infrastructure, but also other acquisitions which impact the total admin cost.
All right. Understood. Very clear. And maybe just a second one. Finally, inventory to sales. I think about 28.1% as the lowest inventory days in four years. If I think back to the third quarter of last year, I was asking whether we could see pre-COVID levels in terms of inventory days. About 94. We're getting down to similar territory. I'd say. How do we think about this? I know you covered it a little bit, but how do we think about the evolution here? Um, I'm just surprised by the strength of that number. Um, on the inventory carry. I think about 28.1% the lowest inventory days in four years.
As I answered in the previous question, we still think that we have room to improve when it comes to inventory. Some of the bottlenecks that we talked about before, for example, getting the equipment out from the final modifications in certain countries, have definitely improved. And that's part of what we saw during the second half of the year when we had a very, very strong cash flow. But going forward. So I think, again, adjusting for the trade situation, I believe there's definitely room for us to further improve and see a better inventory in relation to COGS or sales, given the trade situation that might differ when we redistribute flows, etc. And we'll need to maybe put inventory in places where we don't have it at the moment. So it's a very fluid nature right now in terms of evaluating going forward.
I think about 28.1% is the lowest inventory days in four years.
So that was it. Thank you very much everyone. Good questions and reach out if anything was unclear. We are, as always, happy to help you more than ever, and we wish you very successful investments. Thank you very much.
Bye bye.
Thank you. Bye bye.



















