Welcome to our Q3 report. I'm Malin Siberg, and I'm the CEO of Guideline Geo. For any newcomers to us, this is who we are and what we do. We design and manufacture non-destructive geophysical solutions for any type of subsurface survey. Our main customer applications are to find utilities subsurface, conducting surveys for any type of ground investigation, targeting specifically the infrastructure market and groundwater management, finding new groundwater, or monitoring groundwater aquifers. We are a stock-listed company listed on the NASDAQ First North Growth Market. First North Growth Market. We have a long history. We were founded in 1923, and as you can see on the map, we have a truly global reach through our direct sales offices in orange. The black dots are our partner network, distributed across the world, and we are on a growth journey. And as you can see, our growth journey is shown in the chart below. But let's move our focus to the Q3 numbers. These are the financials in brief. If I start with Q3, the net sales and order intake were down compared to the same period last year. The positive highlight in this quarter is that we significantly improved our profitability, both EBITDA 6.1 versus 5.1 and EBIT 2.1 versus 0.9 for the quarter. We had a negative operating cash flow of -3.6 MSEK. However, our solid net cash is at 16.5 MSEK. So we have a solid net cash situation. We know that we have quarter-by-quarter fluctuations. You can see that in our history. So, if we look at year-to-date numbers to even out the quarterly fluctuations, we can see that we are flat on net sales. We are a bit down on order intake so far. And over the year, we can really see a good and strong trend on EBIT and profitability. Profitability. EBITDA is 11.6 MSEK versus 8.0 MSEK last year. And EBIT is positive 0.1 versus -5.5. And I'll elaborate a little bit more on all these numbers in the presentation. Let's start with profitability. If we look at Q3, EBITDA was around 14% and the EBIT was around 5%, which are good numbers for this quarter. And the highlight for me is that if you look at the net sales, which was down 8%, we still managed to grow EBIT and EBITDA in absolute numbers. So, despite the lower net sales, we increased our profitability for the quarter. And the same goes if we look throughout the year; our work to improve our profitability has given results. So despite somewhat lower net sales, the figure is close to flat. EBIT has improved from -5.5 MSEK to 0.1 MSEK year-to-date for the first three quarters. So we are now after three quarters positive on EBIT, and it's the first time since our record year 2023 that we have that situation, which is very promising for the rest of the year.
What is behind this positive trend in profitability? It is a result of a long period of systematic cost control measures in all parts of the company. It is also a result of measures to secure solid product margins. And you have to work on all fronts to make that happen. On pricing, on COGS, and on manufacturability. And so it's really hard work by many people within the company to make this happen.
And I have talked to you before about the restructuring of our U.S. subsidiary. subsidiary that we initiated early this year, when we closed down our Charleston office in South Carolina and consolidated into a new office in Denver, moving to one facility where we now have sales. We have service, we have support, we have our warehouse, and administration for the U.S. team in one office that you can see in the picture. And this is, of course, a lot of hard work. It is the right thing to do. It strengthens the team, and it saves us costs. And it also included some staff changes to make it happen. So, I am really happy to see that it is starting to give the results that we expected. If we look at cash flow, the operating cash flow for this quarter is negative 3.6 MSEK. And there are many factors playing into this. This is pretty normal, I would say. But in all, if we look at sales in Q3, they were quite strong. It was strong in the last month of the quarter, and we shipped a lot in September, and thus we have not yet been paid by our customers. So we have an increased accounts receivable. For those of you that follow us, you know that our Q4 historically is the strongest quarter in terms of sales. Typically, we also order material to be able to ship according to forecasts in Q4. So that means that we have decreased our accounts payable. We have ordered and received material to be able to build products for Q4. And the comparable number for last year is when we worked heavily to get our stock levels down to a healthier state. It is now at a healthier state, but that can affect the comparison number from last year. And if we look at the net cash situation, it is also being affected by the fact that we have increased our capitalization of our development costs. The reason for this is that our EU-funded project, which I have talked about in prior calls, is now decreasing. And that means that we are spending more hours on R&D development projects that we capitalize instead. So that is a natural step. If we look at January to September, the cash flow was 9.1 MSEK versus 13 MSEK last year. Let us shift our focus to currency impact and how that affects our net sales. We sell mainly in US dollars. In Europe, We sell in euros, and in Oceania, we sell in Australian dollars. On the cost side, our supply chain is mainly in Swedish krona, and two-thirds of our employees have their salaries in Swedish krona. And that makes us very vulnerable to currency fluctuations. And for this quarter, when I said that the net sales are down 8%. If you had used a comparable currency to last year's Q3, it would have been down -7% instead. If we look at January to September, our reported net sales are down 1%. But in comparable currency, it would have been plus 6%, which means that we shipped 6% more instruments from our production. If we break down sales per region, let's look at the performance. And we all know that our quarters do vary. In sales. But if we look at Q3, it was a strong quarter for APAC. I will come back to why and what happened in APAC during that quarter. We were down both in Americas and in EMEA. If we look over the year so far, Q1 to Q3, Americas is more or less flat, and Americas includes both North and South America. EMEA remains strong, continuing with a 19% increase compared to last year. And last year was also growing. So EMEA is doing really well and APAC is down, but it has caught up due to the strong sales in Q3, and when I say EMEA, it refers to both Europe, the Middle East, and Africa, which are performing strongly. This year. And when I say that APAC has had a strong Q3, it is mainly Asia that has had a strong Q3. If we look at market highlights for Q3, we continue to see strong demand from the infrastructure and utility sector. And that means that we sell our portfolio of products, instruments, and software. On the ABEM side, we continue to see a pretty strong demand from the groundwater sector, and we are also getting more and more requests from the defense sector across the world for our systems. Regarding the strong Q3 performance in Asia. We secured two large and strategic orders in Q3 that were also delivered in Q3. The first one is from South Korea from KALIS, which is the Korea Authority of Land and Infrastructure Safety. They placed a large order. We won a large tender, and you can see the results. The shipment in the picture below. We also won a public tender from Malaysia valued at 3.0 million Swedish kronor. And both of these tenders are for multiple GPR solutions. Our modern GPR solutions, both 2D, the smaller ones, and 3D, the larger array solutions and the software solutions that go with them. These two are strategic wins and they are a good proof point of the value of the broad and modern GPR product portfolio that we have, which is specifically targeting the utility infrastructure market across the world. They are also a very strong proof point of the strength of our global partner network. We sell in Asia mainly through our indirect sales channel, distributors or partners, and that really is a strong, unique selling point for us. And it really helps in these types of larger tenders. So we continue to develop our sales channel. And our strategy is to move the needle to even more indirect sales. Typically, two-thirds of our sales are through the partner network and one-third through our own direct sales offices or salespeople, but we are moving the needle to even more indirect sales. The short-term effect of moving that needle is that we sell to our distributors, and they add their markup and sell to their end customers. So obviously, we realize lower revenue than if we had sold directly to the end customer. We also lose on profitability when we use our indirect sales channel. So that is a short-term effect. So, when you analyze our results, moving that needle has that impact on sales and profitability. So why do we do this? We strongly believe that, in the long term, this is a way for us to scale. This is a way for us to actually have that global reach that we have and want to continue to defend. And we are confident that this will help us grow faster and grow the market faster. And we believe that we bring stronger customer value by being local through our partners. In Q3, we added one new partner in Brazil, a huge country with a lot of potential, so we always need to fill the gaps where we have them or find strong partners that can help grow sales. We also gathered our European partners. We gathered them in Athens this time, and we had partners from all across Europe and someone from the Middle East as well join us for sales training and demo trainings. And we also got the chance to get market feedback from their customers. And if we look at what products we sold in Q3, on the MALÅ side, I've talked about two large orders. It is our MALÅ GPR solutions that perform well, and the MALÅ GPR portfolio is the strongest portfolio also in Q3 for ABEM, where we have had solid sales of all three methods—resistivity, TEM, and seismic—with an extra strong sale on resistivity and TEM for the quarter. And the orange on top is what we call other. But it is mainly Reutech sales, monitoring slope stability radars, that we sell to the mining industry in North America. That goes really well. And where we've just recruited our first dedicated sales person to grow this business even further. Let's shift focus to innovation. On the highlights for this quarter. We. We are operating in an industry that moves fast and technology develops fast. And when I was at Intergeo, an important trade show in our world in Munich in September, we could see that multiple of the GPR players introduced major product launches this year. And that proves that things are moving fast, and to be part of this. We need to continue to develop our solutions to compete with players like American GSSI. They introduced a new 2D radar for the utility sector. Swedish Impulseradar. They introduced a smaller version of a 3D solution. Norwegian Kontur. Norwegian Kontur introduced their first hand-pushed solution. They have used. They have previously been focusing mainly on. On road scanning with mobile solutions. IDS. Owned by Hexagon. They introduced a major feature release on their software. We did not introduce something new at Intergeo because we. We decided to launch our new, major initiative in the US in Austin because the product that we launched is targeting the US market specifically, even though we launched it worldwide. And our new product is called the MALÅ Easy Locator Light. And you can see that in the picture in the middle. It is designed specifically for utility avoidance and marking out where you do not need to do software processing. You need to, in the field, avoid any utility and do a mark-out with a spray can. So we want our customers to go from track to locate in seconds. And it is extremely easy to use. And it's also the most affordable in the industry. Another important release for us in the quarter is a feature release of our MALÅ Vision desktop solution where we improved data positioning. We improved data processing so you can perform the data processing faster. And you can easily share projects between the project teams that work with this. So two important releases.
So to summarize Q3 for us, the key takeaways are that we significantly improved our profitability.
It's been a trend, and I'm really happy to see the results here on profitability. We continue to see a strong trend. Trend, strong demand from the infrastructure and utility sector for our solutions. And we got two large and strategic orders from this sector from Asia.
And with that, I'm happy to take any questions that you may have.
Yes. Type it in the chat if you have any questions.