Inderes’ Disclaimer can be found here. Detailed information about each share actively monitored by Inderes is available on the company-specific pages on Inderes’ website. © Inderes Oyj. All rights reserved.
Read transcripts of webcasts and audiocasts
Read transcripts of webcasts and audiocasts
Disclaimer: This is a machine-generated transcript and may contain inaccuracies.
Good afternoon and welcome to our second quarter results presentation. I am responsible for investor relations. We will start with the presentation from our CEO Kati ter Horst and our CFO, Marc-Simon Schaar. And after the presentation, you will have the opportunity to ask questions over the lines. And with that, Kati, I hand over to you.
Thank you so much, Johan. So welcome also from my side. We will start with Marc-Simon Schaar covering the Q2 results. And then I will comment in more detail on our very recent investment decision today. If we start with our results for Q2, profitability improved to €100 million from €65 million in Q1. This improvement was mainly driven by the improvement in business area Europe, while the business area Americas continued its strong performance, and we also saw Ferrochrome results further improve in the second quarter. Of course, in Europe it is clear that regional measures in Europe, mainly CBAM, and then also the steel safeguard measures have supported the market. While we can say that in the US, the market has been and the demand has been more robust, especially in the industrial segments and for Ferrochrome, particularly our low-emission Ferrochrome from Europe. In this geopolitical situation, the demand has been at a good level. We are today talking about our EVOLVE growth strategy, with two important steps as milestones to proceed and progress with our strategy. One is the investment in high-nickel alloys. And the second one is really the publication of our first patent applications. I will return to that in a little more detail later. We usually always look at what the import levels look like. I think the main message here is that the imports in Europe have clearly stayed at a lower level. They were a bit higher in Q2. 17% compared to 15% in Q1. I think this is also a little bit of a pre-buy effect. This was partly in anticipation of the steel safeguard measures that came into force on the 1st of July in the Americas. If we look at the US, the import level has stayed very stable at 20%. And there was a slight increase in the whole Americas region due to Mexico. Then, if I may comment a little bit, did we see anything change in the underlying demand or the sentiment? When we look at Q2 versus Q1. I would maybe highlight some of the positive things we have seen. So basically, data centers both in Europe and the Americas have driven some demand. In addition to that, the heating, ventilation, and air conditioning segment has performed well. And then we see the energy area being one. So those are the highlights we would have on the consumer side, the transportation side, and automotive on both continents. The demand has been sluggish. On deliveries, I think it is really important to comment here now a little bit. Our deliveries in Europe in the second quarter were the highest in three years, which brings the group deliveries also to the highest in three years. But I also would like to highlight ferrochrome. So also in ferrochrome we had a four-year high. In the deliveries, we don't see the Americas moving as much, but we have to remember that we have 250,000 tons of annual capacity in Mexico, which we cannot currently use to the full benefit of the Americas due to the 50% tariffs from Mexico to the US. But volumes played a big role in Q2, and moving on to sustainability. So I am very happy to say that our safety performance further improved from Q1. So we arrived at a total recordable incident frequency rate of 1.4, which is below. This is better than our target level of 1.5, while the whole half-year average was 1.6, so this is work that continues. But I would say that we are very much on a leading level here, but work continues again. We also had a very high recycled content percentage. And then, if we look at external recognition.
I think it is.
It is important to say that being recognized by both the Financial Times as one of Europe's climate leaders for the third time in a row, and also by TIME among the world's most sustainable companies, it really matters because it provides independent validation that the sustainability leadership is real, measurable, and internationally recognized; these rankings assess not only the climate commitments, but also demonstrate progress, transparency, and business performance. So such recognition reinforces our position as the sustainability leader in stainless steel and really supports our strategy of creating competitive advantage through decarbonization and circularity. With this, I will hand over to Marc-Simon Schaar to go more in detail in the results.
Thanks, Kati. Good morning. Good afternoon, also from my side; in the second quarter, stronger profitability combined with continued capital discipline enabled us to further strengthen our financial position. This gives us a solid foundation as we keep executing our EVOLVE growth strategy. In line with our guidance, group Adjusted EBITDA increased from €65 million in the first quarter to €200 million in the second quarter. While the net of timing and hedging impact in the quarter was less favorable than we had expected. Our underlying operating performance was actually even stronger, driven primarily by higher margins in business area Europe. And speaking of Europe, I am pleased to report that the business area has returned to positive EBITDA. Our operating cash flow remained solid at €85 million, allowing us to bring net debt down to €224 million while preserving our strong liquidity position. With that financial overview, let me turn to the performance of our business areas, starting with the business area. Europe. The market environment in Europe was largely unchanged from the end of the first quarter. European producers continued to benefit from supportive regulatory measures, though new demand remained subdued. A meaningful recovery in demand will require a clear improvement in business confidence, which continues to be weighed down by geopolitical uncertainty, particularly around the ongoing conflict in the Middle East. That said, volumes in business area Europe increased by 5% in the second quarter. Beyond the volume growth, profitability in business area Europe was further supported by higher realized prices and lower fixed costs of sales in the second quarter. Following the backlog-related pressure we felt in Q1 from the supply chain planning solution challenges we had. With that, let's move on to business area Americas, which continues to deliver a strong financial performance, underpinned by growth in some segments showing improved demand, such as data centers and related investments into infrastructure, energy, as well as heating, ventilation, and air conditioning. The Mexican market also continued to show early signs of recovery, with the manufacturing PMI moving above 50 in June for the first time in a year and its strongest reading since March 2024. In addition to the 4% higher volumes, profitability in Americas benefited from higher selling prices, driven by an increase in the alloy surcharge supported by an increase in commodity prices. These positive factors were partly offset by higher costs, mainly related to freight and nonconforming material. Now with that, let's move on to business area Ferrochrome. Business area Ferrochrome was able to increase its Adjusted EBITDA in the second quarter versus the first quarter, supported by the solid demand for our low-emission European offering as well as higher selling prices. Overall, the demand remains healthy across all regions, with North America continuing to be the strongest market on the demand side. Production curtailments in South Africa remained in place for most of the quarter, although electricity support measures have initiated a production ramp-up. Export volumes remained historically low. So the impact on the market prices during the quarter remained limited. We also continued with our expansion into higher-margin chrome products, and compared with the Charge Chrome market, the high-carbon and high-chromium ferrochrome, as well as other special product segments, are expected to be less exposed to the anticipated increase in South African production now combined with CBAM. We do see that this is reinforcing the strategic value of our portfolio expansion. Now with that, let me close with a few remarks on cash flow and leverage, supported by the improvement in profitability. Our operating cash flow remained solid in the second quarter, together with some release in working capital and capital expenditures of €34 million. Our free cash flow improved to €51 million, compared to €34 million in the first quarter, and the working capital release came despite higher business activity and rising commodity prices during the quarter. Once again demonstrating our continued focus on capital discipline, the stronger free cash flow enabled us to further reduce net debt to €224 million. As mentioned earlier, despite the first dividend instalment we paid in April this year, and finally, with both profitability up and net debt down, our leverage ratio declined from 1.3 to 1.1, in line with our financial policy. And with that, back to you, Kati.
Thank you, Marc-Simon. I think we should now move to our outlook and guidance. So let's take that next. For the outlook, we expect the group's stainless steel deliveries in the third quarter to decrease by 0 to 10% compared to the second quarter, due to seasonality in business area Europe. And based on our current order book. The net impact of realized prices and raw material costs is expected to be positive. And with the current raw material prices, some raw material-related inventory and metal derivative gains are forecast for the third quarter. So, therefore, our guidance is that the adjusted EBITDA in the third quarter of 2026 is expected to be at a similar level compared to the second quarter of 2026. And then we can move to some more exciting topics here. I am personally very excited to announce that we are now starting the investment program into high-nickel alloys. It is important to understand that with this investment program being executed, we will really become one of the key global players in high-nickel alloys for flat products. During the past year, we have run several trials at our Degerfors plant in Sweden to test the capabilities of our melt shop. Hot rolling and cold rolling assets. We have, for instance, been able to roll alloy 625 into a width of 1,800 mm, which nobody else is currently able to do in the market. We will be bringing a differentiated value proposition to our customers. Then, based on this trial experience and to accelerate the time to market, we have now decided to execute the investment in two phases. So in the first phase, we will invest in electrosmelting at the current melt shop. And we will also invest in process optimization, and we will complete the detailed engineering study for phase two to confirm the total CapEx, which we still estimate to be about €130 million. The CapEx for the first phase of the investment in the current melt shop is estimated to be about 30 million. And once the first phase is complete, it is expected to be operational in Q1 2028. The second phase then is about the new melt shop. So that is about a vertical caster. It involves vacuum induction degassing, VIM-VD, and potentially a second ESR. And this investment is planned to be operational at the end of 2029. Then, moving a bit to the right side to talk about the proprietary technology development in the US. The building of the pilot plant is proceeding on schedule. Our first five patent applications covering the key process elements have now been published, which marks an important milestone in the technology development. It is also important to mention that this technology has wider application possibilities for metals. We are really exploring here a number of options for future growth based on the technology development. With that, I come to some of the key messages from today. Adjusted EBITDA improved to €100 million, supported by market fundamentals across all business areas. Our adjusted EBITDA in Q3 is expected to be at the same level, despite the seasonality we face in Europe. Financial position remains strong and net debt decreased, and we are making real progress in our EVOLVE growth strategy. With that, I will open for the Q&A.
If you wish to ask a question, please dial star five on your telephone keypad to enter the queue. If you wish to withdraw your question, please dial pound key six on your telephone keypad. The next question comes from Tristan Grosser from BNP Paribas. Please go ahead.
Yes, hi. Thank you for the to-the-point presentation. That is really appreciated. I have two questions. The first one is on the metal spread guidance that is positive into Q3. Could you give us some indication of how it is going to differ region by region? I guess we should expect a stable development in the US and an improvement in Europe. I will start there.
Absolutely. On the net of timing and hedging. What we say is that we expect some gains in this area. I would quantify this as a high single-digit number compared to the 11 million. I think in terms of business areas, we do not provide guidance here. Certainly, the Americas business is still on base plus alloy surcharge, and we see a bit of a lower nickel price environment here in the US. So that is impacting the US side. Most of the remaining result is related to the Europe business area. Europe.
Okay, just a quick follow-up on the Americas; given you have base plus alloy surcharges, if surcharges are going down, that shouldn't impact your spreads. Right, and the second question is also a follow-up. When I look at slide 22, which is the EBITDA bridge from Q1 to Q2 for Europe, the red column represents pricing, mix, and raw material costs. If I understand the guidance correctly, this should turn into a significant positive impact in Q3, right?
Yes, I think we guide for, on the one hand, lower volumes, which are being offset by the net impact of realized prices and raw material costs. And you are referring to this item. So, yes, this is a positive element. And being offset by the volumes. And therefore, we guide on a similar level. And what we are referring to mostly is in relation to business area Europe.
Yes, and I guess it is correct to mention as well that we could have had a better mix in Q2. So, we do expect the mix in Europe, especially, to improve in Q3.
Yes.
Okay. And my last question, does this guidance of improved stainless steel metal spreads include the recent drop in stainless scrap prices, or is that going to be more of an impact for you? Q4 results?
I think this is more going out further into the later part of this year.
All right. Thank you.
Welcome.
The next question comes from Bastian Synagog from Deutsche Bank. Please go ahead.
Yes, good afternoon. Thanks for taking my questions. My first one is just a quick follow-up on the Americas and the moving parts there until the next quarter. I guess the impact here from the metal and hedging gain in the second quarter was quite meaningful. I guess usually in the U.S., you still see probably a further positive tailwind from seasonality in the third quarter. So, I just want to check whether you would expect an all-in performance run rate which remains pretty similar to the second quarter, or will there be a slightly larger deviation here between Europe and America? So that's my first question.
Yes, I think as I mentioned earlier, we had expected a higher positive impact from net of timing and hedging in the first quarter. The reason why that has not materialized is basically the increase in commodity prices, which we have seen in the second quarter. And then, together with a different melting pattern which we delivered to the market, a pattern with higher raw material costs. That was the reason here. Fortunately, we could offset this and stay fully within our guidance, which we gave for the second quarter. Now, this is a shift from the second to the third quarter on the European side. On the other side, if we think about Americas, then what I also mentioned earlier is that given current raw material prices, commodity prices are expected to be somewhat lower than in the second quarter. You know that the Americas is on an alloy surcharge basis. So that is having a certain impact here. But from the volume side, we should further consider a robust market in the Americas for the third quarter.
Okay. And then secondly, maybe zooming in quickly on the ferrochrome business, which did very well. You indicated here the potential effect from the electricity regulation in South Africa. Is this something you see impacting the market already, i.e. What are the current pricing dynamics you are perceiving? Is pricing pretty stable, or do you see it coming under pressure already?
Well, as I mentioned in my part of the presentation on the ferrochrome side, we haven't seen any impact on the pricing, also driven by the fact that we haven't seen export volumes pick up here. I think we mentioned that the ramp-up in operations and production has started. We are not in a position and cannot guide on prices going forward, and therefore would rather leave it here with the important notion that we are going to develop our product portfolio into higher-margin business, which should give us an opportunity to decouple to a certain degree from a pure Ferrochrome market.
Okay. Understood. Then, one quick question also on your maintenance schedule. Usually there are some larger maintenance breaks in either Ferrochrome or the European operations. There isn't any in the third quarter. Is there anything we should have on the radar? With regards to this for the fourth quarter, I guess it would be quite helpful to have a bit of detail on that just ahead of time to avoid any negative surprises.
Indeed, we do have our annual plant maintenance shutdown in both Europe and the Americas towards the end of Q3 and the beginning of Q4. We do see some small increase in maintenance costs in the third quarter, but I don't see any significant deviation from that third quarter level going into the fourth quarter.
And Ferrochrome, actually the biggest maintenance shutdown for CF2 took place already in Q2. So that's done.
Is there any cost impact still to come from these in the fourth quarter? Are there any major items, even if it is just a ballpark figure at this point?
They are not major items. There is a small increase here as I mentioned, but it is important to look at our guidance; what we have been saying is that it is most important to understand the volume impact, and also the net impact from the realized prices and the raw material costs. And we do guide for similar. That, I think, is the most important key part. And then you have different items and different dynamics. I mentioned the maintenance break. Nothing major, but in order to understand the guidance for the third quarter, I think we gave the elements in our guidance.
Okay. Thank you.
Thank you.
The next question comes from Joanie Sandoval from Nordea. Please go ahead.
Thanks for the presentation. I would like to start with the variable cost outlook. I think you mentioned the freight costs have increased. But could you give any indication of the H2 outlook regarding freight costs and also energy?
Yes, on the freight costs, transportation costs, and fuel costs related to the Middle East, we have seen an increase in our variable costs in the second quarter. Given what we see right now and the situation which can evolve, as we know, and change every minute. We do not expect a significant deviation from what we have seen in the second quarter.
Okay, that's clear, there might be a ferrochrome follow-up. Does this development of your portfolio require some investments? And if so, when are you expecting to be ready with this?
Well, actually, this part of the portfolio development does not require such big investments. We also use the ferrochrome converter that we already have at the plant. Then, of course, when we want to use the technology we are developing to further go to 90% chromium metal. Then we talk about an investment, but we are not in that stage yet where we can discuss that.
Okay. That's clear. And then lastly on the pilot plant start up and timetable here. When should we expect more information around the patents and maybe the startup timetable for the pilot factory?
Well, look, we said today that our first five patent applications are public. So you can see what the base technology is and what the process technology is. We have made the applications for other patents in this journey that will be public later. The timeline remains consistent with what we have said from the beginning: the furnaces at the pilot plant will be operational in the first half of next year, meaning that by summer 2026, we can confirm the technology is scalable. So we are on schedule, on budget, and on time with the pilot plant.
Okay. Thank you. That is all for me.
Thank you.
There are no more questions at this time, so I hand the conference back to the speakers for any closing comments. The next question comes from Tristan Grasser from BNP Paribas. Please go ahead.
Do you still have a question?
Yes, sorry, I was on mute. Thank you for taking the follow-up. Just on Avesta, the phase two. Regarding Avesta phase two, could you elaborate on the factors contributing to the delay in that decision? And now, given you have more visibility on your CapEx, should we expect CapEx to decline quite a bit next year? And second question on working capital. It is quite unusual to have such strong working capital releases in Q1 and Q2. It has been quite strong. How would you think about H2 or the full year for working capital? That would be helpful.
Thank you.
So if I take on CapEx and Marc-Simon can comment, then on the working capital. Remind me of the obvious. The question was exactly about that.
I think initially you were thinking.
Why we are doing it like this.
Yes, as mentioned earlier. And now it is, look, you.
Look, we have learned a lot, let's put it that way. So we have done a lot of trials in Avesta, both using our own melting and running it through, but also getting slabs in on alloys 625 and 825, which we already produce ourselves and tested the downstream assets as well. But we have also learned that we actually can use the current melt shop for these three alloys. The only thing we would need to add there is an ESR, which increases the purity of the metal. That is what you need for these kinds of metals for quite a few customers. So in that sense, we actually, when we first invest in our current melt shop, we are not delaying the whole project, but we are coming faster to the market with these three alloys, and we are probably a year and a half faster than we would have been otherwise. So, through the learning we had in Avesta, we have found capabilities in the current melt shop that we were not sure about before. And therefore, this investment case has improved with a phased approach. And we still think the total investment is about 150 million. But to be exactly sure of the second phase investment, we still want to complete our detailed engineering study. And that is exactly what we are doing. And then on the CapEx, we have set our maintenance CapEx. That is about 100 million a year. That is where we are for this year as well. We have room for, of course, strategic investments. We will start this Avesta investment cycle now. So some small CapEx will likely be spent this year and continue into next year. But we have also other strategic initiatives on the table. So I think towards the end of the year or the beginning of next year is the right moment to comment on what the strategic CapEx will look like going forward when other decisions are eventually made.
And then maybe I can answer your question, Tristan, on working capital. So for the third quarter, due to the planned maintenance which we have towards the end of the quarter and beginning of quarter four, we do see a certain inventory buildup here. So we expect working capital to go up with current market prices as well. We also have some other one-off payments in the third quarter, such as those related to our restructuring programs for which we provided the provisions already last year and the beginning of this year. Having said that, as a result thereof, we expect our net debt to increase in the third quarter. And then you mentioned maybe also a bit of an outlook into Q4. I think now if I look at the market and the dynamics, we need to see how the market is coming back from the summer vacation period, our customers being back, and how the market develops and picks up here. So it is a bit too premature yet to give a reliable outlook over here.
All right. Thank you.
The next question comes from Maxine Koji from ODDO BHF. Please go ahead.
Sorry.
Good afternoon, I have a few.
Questions on.
The nickel alloy project.
Alloy project.
It is quite exciting. One.
Actually, the market is rather.
It is a two-sided market between, on the one hand, oil and gas and chemical processing, which are relatively weak. And on the other hand, aerospace or electronics that are currently booming. So do you have a view already of the market you would like to address? And related to that. Do you think you can really aspire to become a relevant US player? Given that the footprint will be in Europe. Your peers have actually had to make some acquisitions in the US to really position themselves as US players. And if you have the homologation timeline that has been validated by clients, it would be helpful as well.
Maybe starting on the segment. So, I think you mentioned some of the important ones.
So even maybe.
The oil production is not increasing in barrels. We see an increase in exploration. And oil exploration is going into deeper and more difficult places. It requires more pressure resistance and all that. So we see that market, of course, the Middle East is now a bit different, but for instance, in Latin America, it is proceeding quite well. If you look at the plants, power generation is one area, electronics is one area, and specialty chemicals is one area for sure. And these are global businesses. When it comes to us, I think our biggest volume is what we plan here to have; it is probably not for us, but rather for Europe and.
And.
And Asia, but they are also partly for the US and for Latin America. And maybe one thing to remember is that when steel products now have a 50% tariff being exported from Europe to the US, high-nickel alloys have a 15% tariff, the normal 15% tariff. So it is a product that travels.
Interesting. And the second one is on commodity prices. Also, nickel is now taking a bit of a hit, but molybdenum remains very strong. I was wondering whether that was more of a challenge or an opportunity for you. And maybe if you could shed light on the development of the Greenland Resources project, which will allow you in the end to have your own capacity there.
Well, first on the price itself. Yes, you are absolutely right. I think the market has been in a structural deficit for a couple of years, and we have seen molybdenum prices going up, which also puts a certain pressure on the margin of these products. That is all from the commodity pricing side. But what was the second part of your question? I did not get it fully.
I think it is on the Greenland Resources project. Could you provide any color on the development, the timeline, and when it could be operational?
Yes, I think from what we understand also in the discussions here with our partner, the project is well on its way, and the exact date and time of when it will become operational is still something which needs to be explored. But we are very positive and looking forward to the mining project coming online. Yet I'm not in a position to give any further details, unfortunately, but I'm pretty sure that soon we will be in a position here during the second half of the year and then give also a bit more color on it.
Okay.
Thank you.
There are no more questions at this time, so I hand the conference back to the speakers for any closing comments.
If there are no more questions, then I thank you all very much for your participation and good questions, and I will see you next time. Then, when we talk about the Q3, thank you.
Thank you.



















