Welcome to Robit Plc's Q4 and full-year 2024 results analyst and press conference. My name is Arto Halonen, the Group CEO, and I'm here with our CFO, Ville Peltonen. Uh, at the end of that, we'll go through the presentation. At the end of the presentation, you have the possibility to ask questions either through the audio channel or through chat.
First, a standard disclaimer about the forward-looking statements.
In 2024, we delivered a clear improvement in profitability. Also, we were able to grow in a demanding market in two out of our three businesses.
In the Top Hammer and Geotechnical segment, market demand remained at a good level in the mining segment, but we did not see the recovery or improvement in the construction industry that we had seen in the previous year. We were expecting to see the construction industry remain at a low level throughout the year. Orders received for the full year dropped by 4.4% and net sales by 2.8%. The drop in net sales, uh, was coming from our Down the Hole segment, whereas Top Hammer and Geotechnical Group. Profitability improved.
This was clearly evident when compared to the previous period. We delivered a €2.6 million improvement in our EBIT. Uh, EBIT. The improvement was a result of, let's say, competitiveness, effectiveness, and cost-saving actions. Uh, we have implemented and renewed our. We have renewed our supply chain, as well as introduced a new product family that is more competitive in the marketplace. And we have also taken other cost-saving measures to improve the company's profitability. Net cash flow from operations was €1.5 million, down from 2023 when we had a very good operating cash flow. The profitability improvement supported cash flow development. But on the other hand, more cash was tied into the net working capital, especially due to the inventories during the year. A great achievement in 2024 was the reduction in our emission intensity. We are now almost 40% below our comparison period of 2020, and our target is to halve our emission intensity by 2030 from the base year of 2020. So by 2030, from the base year of 2020.
So we are at a good pace in achieving that target.
We continue to bring new innovations to the market. Uh, at the end of last year, we introduced the H18 DTH Hammer, an extension to our eight series hammer family, where we had earlier introduced four, five, six, and eight-inch hammers. The H18 is the first of the eight-series hammers designed for piling applications. So essentially supporting our Geotechnical segment, uh, with this hammer.
Our customers are getting greater power output, lower air consumption, and it's a versatile hammer for all applications. Uh, in the, in the building sector. Also, we introduced the market a new shoulder-driven RG51 rods, specifically designed for the surface drilling market with a more robust design. Customers are able to achieve faster penetration rates, longer lifetimes, and also straighter holes. Also, due to these benefits and the sturdier design, the downtime for customers can be significantly reduced. If you look a bit more closely at the developments in quarter four, we continued the growth in Top Hammer and Geotechnical segments.
Top Hammer grew by 5.8% and Geotechnical grew by 2.8%. You had a very challenging quarter in the Down the Hole business. Sales in the down-the-hole business dropped by 49.9%. And the main reason behind that is this one supply agreement that ended mid-last year as well as the weak market in the well drilling sector, which is an important segment for our down-the-hole business as well as the exploration markets. Those markets were weaker than we anticipated earlier. Uh, and uh, and, uh, also on the new business opportunities, uh, there was a delay in customer decision-making and we were not able to compensate for the loss that we had from the other customers. If you look at the market areas in quarter four, the growth was driven by Asia, EMEA, and East markets. EBIT did improve in the quarter; comparable EBIT was €0.8 million. Uh, small improvement from the comparison period.
Uh, we were able to get control of the freight costs and the availability situation. Uh, freight costs were very high for us last year, especially in quarter two and quarter three. Uh, but in quarter four, as we anticipated when we published quarter three results, we were able to get those under control, and it did not have a negative impact anymore on our results in quarter four.
Cash flow from operations was negative, €1.6 million. Uh, uh, a big impact came from our payables, which were significantly lower than at the end of quarter three. And this pushed the entire cash flow from operations into negative. Uh, if you look at the sales development for 2024 by market area, Australasia. We had a small positive outlook, although it was mixed in Australasia. Let's say we continued with what we already had: two years of consecutive good, double-digit growth numbers in Australasia when it comes to the Top Hammer business. On the other hand, the DTH supply agreement ended mid-year in Australasia, negatively impacting the DTH business in that market area. Asia had a small positive sales development. Asia picked up the pace nicely.
During the year, towards the end of the year, we were able to win more business from the mining sector as well as the tunneling projects in the region, which supported good development or progress towards the end of the year. M East, which is our largest market area.
Uh, it was a bit of a mixed picture.
We had pockets and areas within that territory where sales developed very well. Uh, but on the other hand, especially, I would say the construction-related markets in Europe and somewhat in the Middle East, they didn't have that good development in 2024. In the Americas, sales declined by 8.1%. We had a relatively flat development in North America. So the decline essentially came from South America.
Uh, and uh, and there uh, especially the mining sector. It's predominantly the mining sector in South America. And that contributed to the decline in 2024 in the Americas market area. Our sustainability roadmap has four focus areas: sustainable partnerships, CO2 emission reduction in our value chain, a happy and healthy workplace, as well as efficiency throughout the product lifecycle. We saw positive developments in many areas during the year.
I already mentioned the positive development in CO2 emission intensity, where we are almost 40% below the comparison year. Also, one positive to highlight is the improvement in the Employee Engagement Index that we had from 2023. So that's a good step forward on that front as well.
I will hand over to Ville to go over the financials a bit more in detail.