Inderes disclaimer gällande utförda aktieanalyser kan läsas här. För mer detaljerad information över de aktier som aktivt bevakas av Inderes, vänligen se respektive bolags bolagsspecifika sida på Inderes webbplats. © Inderes Oyj. Alla rättigheter förbehållna.
Läs transkriptioner från webbsändningar och audiocasts
Läs transkriptioner från webbsändningar och audiocasts
Ansvarsfriskrivning: Detta är en maskingenererad transkription och kan innehålla felaktigheter.
Hello, and welcome to the NCAB Group Capital Markets Day 2026. Both to you here in Sundbyberg. And for all of you watching online. Peter, it was three years ago. We had our last Capital Markets Day.
Yeah, exactly three years. And for me, it has been six years at the company.
Yeah. So what has happened since then, in short?
I think it has been a very bumpy ride during my six years with the company. I think the first three years were very much up as we were riding the growth during Covid. And then we have seen a couple of years of Covid hangover plus the war in Ukraine and rising interest rates. But now in the last year and a half, we have started to see the market come back up again.
So we have a very exciting afternoon ahead of us with a lot of really interesting information and going into depth in several sectors. So, let us have a look at the agenda, here we have it. First, Peter will talk about our business model. And we will also cover resilience and sustainability, including a deep dive into the aerospace, defense, and medical sectors. Also, we will be visited by Kelly Davidson from the US and Andy Liu from China. And then we have a Q&A session, a shorter one before our coffee break, and after that, more on M&A, financial performance, and the new financial targets that you probably have seen that we released this morning. Wrap-up and the Q&A, and some drinks and snacks. What do you think about that?
Sounds very good. And I think beyond what we will be presenting today, I would also encourage you to take the opportunity to interact with my colleagues. And we also have several members from our board present. So maybe, Christian, can you show who you are? We have Christian Salamon and Hans Ramel from our board. We have Hans Ståhl and we have Marlene Wåhlin as well.
So let's get started.
Very good. Thank you.
The floor is yours.
So I will start by talking about our business model and how we add value for our customers. Interestingly, most people are not aware of us and they do not see the work we do, yet they depend on us every single day in demanding applications where products are used in hospitals, on factory floors, and in vehicles, just to mention a few applications in all kinds of technology that moves the world forward. But no one really knows what's behind it. But our customers know, and they realize that making reliable PCBs and supplying them day in and day out on time is hard. It starts with finding the right factories, getting the design right from the start, and handling logistics. As the world's needs change, we answer engineering questions quickly and accurately, constantly monitoring factory performance and KPIs while absorbing all kinds of disruptions before they ever reach our customers. And this is something that we in NCAB have been perfecting over the more than 30 years that we've been working. It is something we perform at a really high level today. But at the same time, the wheels of the world are spinning faster and faster. We see new technologies emerging, new manufacturing technologies, ever-higher demands for speed, flexibility, and efficiency, and also geopolitical events that change the markets completely for us. So getting things right is harder than ever. And that is where we at NCAB can make a difference. This is where we are, and we add value for our customers to help make it easy for them to get it right. And we do this by embracing complexity, continuously developing so that our customers can focus on what they do best. Developing the new technologies for the markets ahead. And for us, being number one has never been the goal in itself. It is our constant quest to improve in absorbing new difficulties and making things easy for our customers. And that is why we have also, in the last year, updated our vision to be specifically making PCBs easy, not because it is easy, but specifically because it is hard. And we in our model are focusing on the most demanding customers in the market. And that is where we feel we add the most value. So we are looking at customers with high demands, whether it is technology, quality, or cost efficiency, and looking at how we supply them on time with zero defects, also sustainably produced, to give them the overall lowest total cost. And we've built a model where we have a strong local presence. We are present in 19 countries around the world with our local presence, and even if we don't own any manufacturing facilities, we have a very strong manufacturing portfolio of factories that we are partnering with and out of our close to 700 colleagues, more than 120 are working with securing the factory end of our business. In the global PCB market, which is worth around 110 billion USD today, we are focusing on the HMLV share of that market, which accounts for approximately 30% of the total. So we are not a player in standard consumer products or lower-tech applications in high volume, but specifically focus on industrial products, medical, aerospace, and defense, for instance. And in these segments, we typically see that the PCB is a very small portion of the total product cost. Yet the demands on the products in terms of quality, efficiency, and reliability are extremely high. And even if some of our customers are very large corporations, given that the PCB is a small part of their spend. Even though the PCB is a small part of their spend, they struggle to have enough resources to take care of the PCB side of things. And if they have it, it is difficult. Sometimes it is even hard for them to make a good business case, because the cost of managing a complex commodity like PCBs outweighs the actual spend they have on the PCBs. So this is where we add value, because even if they actually have the ability to handle it, they are small consumers and struggle to really get good support from leading factories. We are able to amass our combined spend from more than 3,500 customers globally and maintain a portfolio of the best factories with favorable commercial terms, allowing us to supply competitive products to our customers while ensuring a strong margin for our business. We play a critical part in the supply chain. PCBs are engineered products. These are not standard components, and I think it is an important role we play for the factories that are experts in manufacturing PCBs but have very limited knowledge about the end customers, applications, and their specific needs. Likewise, our customers are experts in their fields and their end customers' needs, but they struggle to be strong on the manufacturing side of PCBs. And we, as NCAB, bridge that gap in the supply chain. And we do that by being supportive in all parts of the value chain. In the development phase, we can support with design and prototyping, where we also can help some customers to get complete assemblies for their work, and then in the industrialisation phase, as we are ramping up into full production and even actually also ramping down when products are going through generation shifts. So our early involvement secures quality, performance, cost efficiency, and a very resilient supply chain. On that note, I would like to welcome my colleagues to the stage. So we have Anna Lothsson and Chris Nuttall who will be, oops, sorry. Who will be talking us through a bit more about our supply chain. And I have only six years with the company. You have considerably more. Who joined us first, and what have you been doing throughout the years?
I will take that one. I started in 2005 as a strategic purchaser, where I began building the factory panel we have today and laying the foundation for our factory management, and over the last ten years, I have also led our sustainability strategy and approach.
I joined a little bit later, in 2010. I think it was 2010, and I started in the UK, where my background was as the operations director and quality manager, before developing into a group role. And that led me to the stage today, I guess.
Very good. Well, the floor is yours.
Okay. Thank you, Peter. So our aim today is to go through and talk a little bit more about the supply chain resilience that Peter touched on in the opening. To do that, if the clicker works, I am going to bring us back to the model a little bit. And as we know, the NCAB Group model creates optimum conditions for our customers through consolidating our volumes and also providing expertise. And the critical part of this is taking the full responsibility, both at the factory side and at the customer side as well. And I want to point out that whilst we don't own any factories or have any investments in particular factories, what we do own is perhaps the most critical part, and that is the relationships with the factories. Of course, we have relationships with the customers, but having them with the factories—as I will show as we go through the next couple of slides—demonstrates the benefit that brings to our customers. Equally, we do not have to feed our own factories or direct jobs that may not fit. We are able to pick the best solutions in terms of factory base for those demanding customers that we heard about in the beginning. And that provides us the ability to meet both current and future needs and maintain the performance. If we look at the customer side, I'm not going to go through all of these, but two I will pick out here in the middle are the PCB knowledge, and that comes from our many years of being involved in PCB production, but then taking that through to the customers as well. How we support them with specific knowledge about this industry. And if we look at the factory side of things.
We are able to support our customer needs. We have built up a factory panel. As mentioned before, we are a fabless supplier, but that means having a very thorough sourcing and approval process and not only to secure quality technology, but also the sustainability parts of it. Social accountability and also the environmental part of the business.
So that was an overview of the model. But how is the model performing while we are in a turbulent environment? And that is where we are at the moment. I think we have all heard how the industry is being affected by the demands of AI. It is consuming a huge amount of materials. It is leading to the point where we see shortages in the material supply industry. I think some information we have had from our laminate suppliers is that, globally, there is an average gap of over 12% to 15%. And of course, we see that even those factories that are not directly involved in the AI business are overloaded due to the spillover effect, where the tier ones are full with AI-related business and their other orders cascade down through the supply chain. But I want to make it very clear that in these turbulent times, these are, in fact, a great opportunity for NCAB. The reason being, the leverage that we have and our relationships with the factories mean that we are prioritized. We are quite often among the top one, two, three, or four customers for the factories within our base. So we are prioritized both in terms of factory capacity, i.e. The orders that we place. But in the current environment, we have guaranteed allocations of material. So we are at the front of the queue. And this enables us to get our fair share of material in an environment where that is one of the key commodities. We are in a period now where not all the factories get all of the material they want or need at the time. Being at the front of that queue creates a significant amount of value. And our size, as well, gives us the ability to have very good relationships with the laminate manufacturers. We are acting effectively as an OEM because we can help direct the customers to choose certain materials. So that gives us very clear insight and visibility into what is going on in the industry. But also we get priority support from our laminate manufacturers as well. So the ability for us to continue with a high level of security and reliability in our supply when the supply chain is beyond stretched is a huge and direct advantage over our competitors. It puts us in front of what they can offer, hence this is an opportunity for us. Now, we spoke a lot about AI, but I will try to explain how we see it evolving and the effect that will have on the electronics industry. I have included this graph. It may be a little bit confusing with the two colors of green. The light green represents the AI or data center CapEx. The dark green is PCB projected revenues looking from 2024 all the way through to 2030. What we can see here is that we are forecasting in 2026 to finish around $950 billion in terms of AI data center CapEx, which is doubling where the industry was in 2025. But if we look at the forecast for 2030, which is somewhere between 1.5 and 3 trillion, it is quite clear that this is going to have a continued impact on the electronics and the PCB industry. In basic terms, it does not look to be decelerating. In fact, it is accelerating and will continue to grow. So I think it's clear to say this is not going to end as we tick over or move into January 2027, which is another reason why I believe that our model and the supply chain resilience that we have will continue to add value long-term for our customers. If we look at the regional view, this is how we see the situation across the various regions where we have manufacturing partners; we are looking at the top one, which is material availability—the ability of the factory to get all the material they need when they need it. The lead times that they face, how busy the factory is, how heavily loaded they are, but also the pricing impact. Now, we can see here that China is very much showing as red all the way through. Now, one point to remember is that approximately 85% of all PCB material comes from Asia, with China as the largest part. So it is not a surprise that the Chinese market was the first to see these pressures. And this started at the start of the year and has continued throughout, where we have seen factories not receiving everything they want, allocations coming into effect, and monthly price increases. Now what we are seeing is that Taiwan is beginning to catch up and experience the same pressures that we saw in China as we move through the end of the second quarter into the third quarter. In fact, we are seeing longer lead times and price increases expected to come in or continue. Europe and North America are slightly different. Now, those markets account for 2% of global consumption of PCB-based laminates, 2% each. So that fits in between the larger demands in China, Taiwan, and the rest of Asia. It is still a very important market for the laminate manufacturers because certain materials are then designed in. But equally, they have two large buffers. They have the distributors that support the individual PCB companies, specifically in Europe and North America. But also, these markets are focused on smaller volumes, prototypes, and a very different setup. But one thing, none of these regions are immune from the pressures that we are seeing within the supply chain. This is a little bit of our crystal ball slide, I think it's fair to say, and it's one that we're asked constantly. What does the outlook look like? And here we have tried to assess it. Looking at four areas, the more standard material that is used, let's say, in non-AI-related business. Then we have the higher-end, low-loss, high-speed base materials that are used in those applications. We have the copper foil supply that supports the higher-end material. And we have CCL. And that is a key element that is used in the more standard products as we can see. I think the key takeaway here is that we are not expecting any significant improvements in conditions until the second half of 2027 at the earliest. It may also be until 2028 or 2029. If we are expecting to go back to the conditions we saw pre-2025. So, this is why I think our supply chain resilience is critical. That is the value in those elements that will continue to add value to our customers. It will continue to differentiate NCAB as we move through the next couple of years. Equally, there are a couple of caveats here. In any crystal ball projection, we have the demand from the AI market. What will happen? Will the Western demand or the growth, or the funding, potentially slow down? What will happen with the Chinese domestic AI? Will that accelerate even further and faster? Equally, we will get new capacity coming in in all of these areas. So there will be some easing. But as I said, it will be the second half of 2027 before we see any sort of improvement. What is interesting as we move from 2026 into 2027 is that we are moving from this red area here, which is highlighted by the light red box, where we experienced a phase of almost panic buying as the whole market grew accustomed to the challenges, with people trying to avoid price increases and secure material supply for the next six to nine months. We are moving away from that. We are seeing that happen now. And what we are seeing is that we are living with some of the pressures and stresses, and we are ordering in a more normal pattern, I would say, where customers are ordering what they need for when they need it, rather than trying to order out nine months in advance. So this is why I think the first half of 2027 will be interesting to track. Now, all of the points that we've covered so far today, I think Peter, this has been a 30-year journey. We have tried to summarize some of the developments on this slide. But the work that we are doing in our supply chain and in all areas is not something we can do overnight. It does not happen by accident, and I have been doing quite a bit of talking. Anna, maybe you would like to cover.
Two points to highlight here. 2005 is when we structured our purchasing to be a little bit more strategic in building up our partner factories. At that time, we also focused on how to improve quality and delivery performance. That was also when we established our factory management in China, starting to work in a more structured way with our factories and how we source from them to meet our demands. Another one for you.
I will go. Okay. Yes, I am going to go back to when I started, which was 2010. I mentioned that my background was in quality. So, I am going to look at the NCAB specification. And that is our benchmark for what we see as a reliable PCB, not just the industry standards or the requirements of the customer. We set a benchmark across the whole group, and that is what we continue to supply against. But I think also, if we look at 2019, as well as the growth of our geographical portfolio in terms of factory management in Taiwan and the growth of factory management as a supply region, we also grew and started our technical council. And that was where we put a lot of activities in place. So we are the technical lead within the industry, whether it is offering design support or offering technical solutions. But I think those things have helped set the foundations for what comes next. And one thing, whilst we've talked a little bit about the evolution, when we look at 2010 again, here we had quality performance around 2,000 to 3,000 PPM last quarters. In the third quarter, we were at 120 parts per million. That refers to defective parts per million. So that is a great leap, but more importantly in the current times, we've achieved just under 95 percent, at 94.8 percent delivery on time to our customers. So with all the turbulence that we are seeing, I think we have market-leading numbers to support that. There are just a few more elements that I would like to highlight. We have talked about the key elements of our supply chain resilience. The first part here is qualified multi-sourcing. For NCAB, this is not just about having multiple options, but having multiple factories that are capable of offering best-in-class quality performance and reliable PCBs. In this example, factories typically tell us that they can handle a wide range of technologies and volumes. We will only approve them for areas where they excel, in this case the green out of all the options. And that helps us maintain our performance. Having our factory management team on the ground and around our factories—we have 120 plus people across all regions—enables us not only to push the factories for their continual improvement, but also to have visibility into the situation at our manufacturing sites. That visibility and knowledge allows for quick, accurate communication, enabling us to provide the best solutions for our customers. We can act proactively. We have mentioned our geographical footprint, so we are not limited to just one region. 17% of what we are producing now comes from outside of China. And as I mentioned regarding technology on the previous slide, our evolution continues; not only do we want to be the leading supplier, but more recently, through our experience, we have been able to qualify for new material types this year, which enables us to keep supplying our customers with qualified, reliable base materials. So those have been a big advantage as we have achieved the delivery performance I mentioned. But Anna.
Over to you. Thank you. Yes. And I think we have talked a lot about challenges. And it is not only about supplying PCBs. We are in a challenging industry when it comes to sustainability as well. The electronics industry has a journey to complete regarding sustainability, but challenges arise and we see opportunities that come with this. And that is also how we started our sustainability journey back in 2013. We were thinking about sustainability. How can we add more to our business offer? How can we stand out from the competition? So we were very early in this. Of course, we listened to our stakeholders, to you, to our customers, to our employees, and to our factories. What should we focus on? And what were the headaches at that time? At that time, it was divided into CSR. It was divided into environmental concerns. And I think now all of us working in the field here know that sustainability is a broad umbrella. It contains social accountability, climate, environmental circularity, and financial strength. Also. Now comes information and cybersecurity. It is a lot now. So I think we will only see it evolving. But at that time, we were also focusing on our different main stakeholders that we work with to see where we can improve. And that was the supply chain, our own operation. And also, how can we add value to our customers. And we are talking about a resilient supply chain. From a sustainability point of view, we look closely at the partners we work with, especially in the high-risk manufacturing countries where we operate. It is about human rights; it is about working conditions. It's about their way of handling environmental issues, not only compliance, but how can we be a little bit better than that? To be in control of our efficiency, energy efficiency, and so forth. And knowing where the biggest emissions and environmental impacts originate from the business that we run. And, of course, our own operation. My dear colleagues around the world are extremely important. We build this culture, which is highly engaging, to retain and attract new talent. And that is where we also would like to outperform the competition with our knowledge, with our high service and technical expertise. So that is where we also add customer value. And one thing on top of this as well that goes through all those pillars is, of course, the climate impact. How can we reduce the climate impact from our own operation to support the customer on their journey and also in our supply chain? So coming back to always asking ourselves, how can we bring value to our customers? How can we grow our business with this? Of course, it is about what kind of company we would like to be, but also how we can utilize our knowledge and all our colleagues who work very closely to have our eyes and ears on the ground with the customers and at the factories. In the last few years, customers have been asking more and more for data. I think we have always been very transparent with our performance, our findings, and so on, and with that, we have high credibility. But now it is more about data. And today, there is a lot of average industry data when doing your product carbon footprint calculation. We have now invested effort and time with our factories to understand more. Where does the most significant emission come from? One significant factor is that 50% to 60% of the carbon footprint of a produced PCB comes from the energy used during manufacturing. Another factor is how we transport the goods. So that is good. Then we know where to focus. Another part that is growing is the regulatory landscape. So to ensure compliance not only for our own products, but also to support our customers in understanding and navigating the compliance and regulations coming. And how can we support them in being compliant? It's about the content, the material chemicals, other substances, conflict-free minerals, and so on, to support our customers, to show that we help them to be compliant in their markets. And lately, we have also focused on circularity. It is very popular now to look into how we can be more circular. And here, we are looking into new materials. It can be either materials that will be able to be recycled going forward or potentially more bio-based ingredients. So here we are working together with some material suppliers, with a customer and their customers and their manufacturing partners on evaluating those materials. So it's really exciting times as we look at where we can go with this. Talking about our footprint, then of course, we should focus on where. We need to focus on where the action is and where we have the most significant footprint. We have just submitted our climate targets for validation by the SBTi. We have measured our emissions since 2021. So it is nothing new to us. But now we have recalculated to better reflect the current situation. We are currently awaiting their validation, and our Scope 3 emissions, which primarily stem from our supply chain, account for over 99.5% of our footprint. So there is some job to do within the supply chain, but also together with the customers. So, choosing which factory produces which board actually has a big effect on where we can reduce emissions. We also aim to strengthen our accountability, as we have always been very transparent, but we are frequently assessed by customers on sustainability. But we have also chosen to be assessed by EcoVadis, and they are assessing companies globally. And here we are very proud to end up in the top three in our industry with the results we have, and the top 6% of all companies globally assessed by EcoVadis. Our strongest points are actually within the theme of Sustainable Procurement. And as I said, that is where we have the biggest risks and biggest opportunities. So we are very proud of that. That is where we are strongest. We are also participants of the UN Global Compact, and last year we were part of the CSRD reporting. And this year, for the financial year 2026, we are out of scope. But that does not mean that we will not report. We will continue to report our risks, our opportunities, our actions, and where we are on our targets. So there will be data coming. And also, as I said, pending is the validation of the SBTi targets. So I think with this, we feel that we are in a good place. We have this excellent foundation where we work together with customers, our own talented colleagues, and our manufacturing partners.
I think we are very well positioned for what the future throws at us. Really.
Thank you very much.
With that, thank you.
That is mine.
That is my part.
All right. So with a strong foundation, we start looking ahead and see how we can drive growth in NCAB. Looking at the background, we can see we have a strong history and a good track record of constantly outgrowing the market. Whether you look from 2001, 2010, 2015, or 2020. We have had very good development as a company. The majority of our growth has been organic, and in recent years, we have also seen more contributions from the M&A side of things. We have also made a significant journey compared to our competitors or our peers in the industry. If we look to the left, this is where we were in 2018. As we went public, we were one of a group of, say, larger global players. Since then, we have clearly outpaced our competitors, and some of the other competitors have instead been trying to grow by diversifying into other product areas, whereas we have been staying true to printed circuit boards and developing that as a leading position globally. We have also, over the years, become more geographically diversified. We are no longer purely a Nordic company, which was our history. But as you can see here, Nordics represent roughly 25% of the business, but continental Europe represents half of the business, and the remainder is connected to North America and the East. And the great thing is that we have fantastic opportunities to grow market shares in all of our regions, even in the Nordics, where we have our strongest position. We still have a sub-20% market share in the markets we are focusing on. In continental Europe, we are maybe around or below 5% in the market. In North America, however, we are at less than 2%, and in the East, we are at 0.1%. So as we look forward, we look to grow in all of our regions. But ideally, we also want to see these two bottom regions grow more and more over time, to balance what we're doing in Europe. We are also very well diversified in our market exposures. We have. We have over the years developed a position where we have nicely spread sales into a number of different niche applications. And also on the customer exposure, our dependency on a few larger customers has decreased over the years. So our top ten customers today represent less than 20%, which gives us also a very strong, resilient position going forward. And if we then start looking ahead into the future, this is the projection by Prismark, who analyzes and follows the global PCB market. They are projecting from 2025 that the market will overall grow at a rate of 14% per year. And the real driver is the PCBs for data centers. As you can see, that is projected to grow from 2025 by 28%. A big chunk of the growth, as you can see in the graph, comes in 2026. But even if you take out that year, you'll see that the forward projection is that the market overall will grow just below 10%. And anything outside data centers, maybe in the order of 7.5% going forward. So we are looking at a market which is projecting growth in the years to come. And if we look upon, or try to say, break this down into the HMLV segments, we can see that data centers are normally predominantly high-volume applications. Data center boards are not a market for NCAB. However, there are, of course, fringe applications. You need the power supplies, and you need the cooling. You need all kinds of other auxiliary equipment around a data center. And those are areas where we can participate. And that is also where we have seen some success for NCAB in 2024. As you may have noted in our reporting, through our position in industrial and in power and energy, we are able to step in and support parts of these applications. But I think what is a very good position is that we have strong positions, more or less in all of these segments as we go forward, and we will be hearing more about that going forward. As we're trying to grow, we are constantly developing our way of servicing the market, whether it is on the local sales side, close to our customers, where we help our customers with design for manufacturing, really optimizing their design. In most cases, the customers will supply us with their design, and we will look to see how it performs for manufacturing, which is the best factory, and whether it is truly a good design for manufacturing or something that drives costs or will create quality risks, helping them update their design accordingly. We have the labs and technical counsel with the labs that we have locally. Out in the regions, this means that we can very quickly help our customers analyze problems. In many cases, it is not a problem with the PCB, but they are unsure what it is and we can help them shorten the lead time to understand what the issues are. We have our industry sector specialists who can advise and provide guidance in specific industries, and we also have the ability to do layout design. And it may refer to that. We are supporting our customers in China with design services, not only on the production side, but also by assisting with layout, prototyping, and in some cases, delivering a complete lab prototype with components. We also have the entire factory management setup. We are really achieving a lean process. Chris mentioned that we have pre-booked capacity. We have capacity so we can always ensure strong deliverables. We are leveraging our global logistics flows to have efficient and flexible logistics through our factories. We have real-time order management to follow up exactly where we are in the process with deliveries and to be able to interact if something starts deviating. We also have the ability—and this is part of the investments we have been doing over the last few years to raise the capabilities of our business systems—to connect to customers and factories digitally in a very efficient manner going forward. And we have global account management to manage our customers' needs who are operating in different regions. A part of our growth over the years has been a geographical journey. This is where we were in the year 2000. It was predominantly a Nordic business at that time. We moved ten years forward. We had established sales in a number of European countries. We had also started sales in China, and we also had Russia as a market for us at that time. Moving to 2020, we added North America and expanded further with companies in Europe. And now we are in 2026. We exited Russia at the start of the war, but we have continued to expand our coverage. I believe there are now very few white spots in the European area where we do not have a local company. We have recently started our expansion in Asia Pacific through the announced acquisition in Australia. This is something we have successfully implemented. We mentioned we have a position in the breakdown of sales, but not only do we have sales to these sectors, we have really learned to master the specific requirements. These might be technical, commercial, legislative, or other forms of requirements. These are requirements that we now fully understand. We can speak to our customers in their language. And this is something we could say we have developed from. Sometimes we have success in a certain market. A good example has been our development in EV charging, for instance, which was very much a Nordic business, but where we had long-term experience, which we could then transfer over to grow that business, both in continental Europe as well as in North America. We are now going to look a little bit deeper into two sectors today. I'd like to welcome up on stage Rikard Wallin, who is going to talk about our activities in aerospace and defense. And Rikard, like many of our NCAB Group colleagues, this is not your first job with NCAB. It is not. You have held different roles.
Yes. Thank you. Peter. Yes, I started 15 years ago. I was the Managing Director for NCAB Sweden for 12 years. I also served as the Vice President for the Nordic region for five years. And then three years ago, I transitioned into the new role of sector lead for aerospace and defense. Thank you Peter. So I wanted to start by giving you a little bit of context on what we mean when we talk about aerospace and defense at NCAB. So we have defense, we have commercial aviation and space, and defense is by far the largest sector of these three. But they are all relevant and they have different growth paths for the coming years. The outer world trends that primarily impact us are technology and geopolitics. But I will start a little bit with the technical commentary. I mean, the technology development, edge computing, AI, and space cadence. It has never been easier or more cost-effective to launch a satellite. So these things have a big impact on the trends in the development of these markets. And then to add on to the geopolitical situation where we see European resilience and American resilience becoming more and more important, where do you have your supply, et cetera. And where do you have your production footprint? Aviation. A lot of the revenue within commercial aviation comes from cargo and passenger revenue, but there is, of course, also a lot of cabin modernization and upgrades in engineering electronics. So how well does that fit with NCAB? Well, it fits perfectly. You know, it is a perfect match. It's about high reliability. HMLV is a perfect fit for NCAB's added value. We don't have the commercial electronics or consumer electronics volumes, but we do have high quality, high reliability, and we are able to work with the industry-specific requirements. As mentioned here, AS9100 certification, IPC Class 3, and IPC 6012. There are a lot of specific requirements for aviation, space, and defense that have to be met. And you have to know, in order to be adding value to the customers within these types of companies, we are already today supplying 14 of the 25 top global contractors. So we know this business. We are already doing a lot of this business in our different entities around the world, stronger in some countries and more developing in others, looking more into the trends and drivers. You saw some comments on the previous slides more applicable for PCBs. In aviation, there is much more electronics, not only in the cabin. In-flight entertainment is the most obvious one, but of course, cabin modernization in terms of engine control, sensing, and monitoring. And we work within the space sector, covering low earth orbit satellites, nanosatellites, and the rapidly growing Starlink satcom market. It is so easy to launch a satellite. Today, and together with the technology development, this is definitely a very nice growth market. And for defense, yes, rearmament is occurring not only in Europe but also in the Pacific. We do see this in combination with the technology development and the advanced computing on board almost everything these days. So we have the experience and we have a lot of the business already. But why do we win? Where do we add value? I very much appreciate what Anna and Chris said about our factories and our resilient factory management. You will probably hear resilient supply chain a lot today because that is a place where we really add value. The way we work with our factories. We don't approve them for what they believe they are good at. We approve them for what we believe they are good at. And that not only goes to technology, but also that you have experience to supply into aviation safety-critical applications, that you have experience to supply into defense, and that you are in the right region to be able to supply into that. It is a very fragmented market, not a consumer market, but a split market where different companies and different countries have different requirements. And the regulations are different in all regions. And within the European Union, there are as many deviations from the rules as there are rules. So, we know this is where we can add value. We have factories dedicated to aerospace and defense in the US, in Europe, and in Southeast Asia, for both aviation and space applications. We also do a lot of business with our Chinese factories. We also supply into ITAR projects. So ITAR is the US export control. This is very strictly regulated among all export controls. And this is something where we have a lot of experience and supply from factories in different regions. What more? Well, the reliability and design for reliability start from the beginning. Our local teams and local engineers in each office are key ambassadors who ensure that we engage with our customers to understand the application, not only for the technology, but to ensure that we map the application with a suitable factory. So we will ensure that we can supply high-reliability PCBs where failure is not an option. It has to work every time. If I should mention anything more, I mentioned export control already. Yeah. That is a place where a lot of customers need our support. A lot of customers are not familiar with the export regulations. So we become sort of the educator for many of the contract manufacturers on the market. I have been doing this full-time since 2023. I work very closely with our factory management teams throughout the world to make sure that we continue to have a capable and competitive factory supply base for aerospace and defense applications and customers, because a trusted and resilient supply chain is the key. We audit the factories, we verify, we qualify, and we have our own labs. We have seven different labs throughout the NCAB Group to make sure that whatever the customer gets is what they expect, and it will work every time. Other things that we have been doing over the last year include our certification towards CMMC Level 2 as of February 2nd this year. That is a US Department of Defense requirement for all new contracts. You have to be certified to CMMC. It is around cybersecurity. It has existed for several years. But the new thing is this third-party certification, which NCAB passed with a full score. Kelly and the team in the US, together with our information security team in the group, have done an excellent job, and we were early on this; it is key to staying in the US market for defense and aerospace. Also for Europe. We were the first PCB producer that was introduced into Aero Excellence. Aero Excellence was initiated by the French association GIFAS, together with some tier-one aviation producers, and NCAB was the first supplier to add their reliability and production excellence into aviation applications. So where do we go from here? What is coming next? I mean, we work a lot with customer focus. That is the main focus for me: to make sure that we always stay on top of what the customer needs. What are the customers asking for? What are the upcoming requirements and quarterly sector business reviews? I meet with all our offices that work with aerospace and defense, go through the current lineup of activities, see if we can do some cross-border activities, and join lines between teams. And of course, we run many targeted marketing campaigns toward these types of customers and decision makers at different levels. To add something more here, we have ten countries with NCAB Secure. You might not know what NCAB Secure is. And that is good because that is our proprietary solution to handle sensitive data, especially for defense projects. So whenever there is an export control or export restriction, we need to be very careful about how we handle the information. So we have ten different servers located in each country that handles defense business to make sure that we are compliant with the national and international laws, regulations, and embargoes. So that's something that we already do. We have more than 70 employees around the world who have completed the full aerospace and defense onboarding to ensure we are aware and cautious whenever we see something that could be for a defense application and to ensure that we handle it correctly. And we also advise our customers to ensure that they are handling the information correctly. Correct. And we have had amazing growth in the last few years, and we have a really good setup for the coming period as well. With that, I welcome my colleague, Samuel Tompson.
Thanks, Rikard. So, I'm Samuel Tompson. I've been back with NCAB Group for 18 months now, but I have spent the last 19 years in and around the electronics industry. And I just wanted to take a few minutes today to explain why the medical sector is so attractive to NCAB, what makes the sector difficult to enter, and how we're turning our existing capabilities into a more focused growth platform within this sector. So PCB demand sits across multiple subsectors in the medical space, and that is really unique because we are not relying on a single customer, a single technology type, or a single subsector to drive growth. And it gives us flexibility to really focus on where we, as an organization, are strong. Now, overall, the medical PCB market is worth about $4.7 billion today, and it's forecast to grow to about $6.1 billion by 2030. Now within that, we are not focusing on everything. There are biocompatible requirements and high volume, which is not in our focus at the moment. Our focus is very much on the High-Mix Low-Volume (HMLV) segment. Low volume, high complexity boards bring in value through factory management, engineering support, quality control, and a focus on supply chain management to really drive value to our customers. And the other characteristic, which is particularly interesting, is the life cycle of these projects and programs. It's not uncommon for a project that we pick up to be with us for ten plus years. In fact, we have one project that we have been manufacturing for nearly 17 years now, so it is very sticky business, but it does have higher barriers to entry. Now, we are seeing a couple of trends across the market. The first point is that there is more electronics going into each medical device. And those electronics are getting smaller, lighter, and more complex. Traceability and supply chain resilience, as everyone has mentioned, are key because these are life-critical devices. You need that supply chain resilience. The longer product life cycles are continuing and, in some cases, are getting even longer. Because the authorization and approval process for medical devices is becoming protracted, and it is not uncommon for a device to take 18 to 24 months to get its FDA approval, for example. And as a result of all of that, we're seeing the demand for earlier engagement with our PCB suppliers. They need the engineering support to help them optimize their designs, to do the Design for Manufacturing, and to help them take that technology leap within their organization. And we are focused very much on some key subsectors. As I said, we don't want to do everything, but areas like surgical equipment, we've got strength in surgical robotics, surgical lighting, endoscopy systems, hearing protection, hearing aids, life-sustaining devices, wearables, and connected health are an area of particular focus at the moment because of the growth in the market. And really, what differentiates the medical sector is the consequences of failure. So if consumer electronics fail, it's annoying. If industrial electronics fail, it can be expensive. But in the medical world, if the electronics fail, it can have life-impacting results. That is why customers require a combination of product features that deliver ultra-high reliability and risk reduction. And in this market, risk reduction is more important than cost reduction. Traceability and compliance are key, and they are a baseline. Customers require a controlled, auditable supply chain and a documented history of it. The complex technology is now being required more and more because of that miniaturization and the development within the devices and their connectivity, and especially they need that long-term continuity. As we said, products can stay in the field for ten-plus years, so they need a stable supply chain with no unexpected changes. Taking it from prototype to validation through to mass production. And that does mean qualification for this is quite a long process. But once you have that qualification and once you secure that business through a design-in, it typically stays with you for a very long time. As we said, you need a combination of those different things to be successful here. And the great thing is NCAB already has that through our standard operating model. We have 27 ISO 13485 approved factories. All of those factories can produce up to IPC Class 3, which is required within the medical space. And 17 of those factories are high technology to support the projects that we not only have today, but the projects that we're looking to secure tomorrow. On the topic of traceability, because of our structured on-site audits, documentation, and our board-level traceability capability, we are in a really strong position. Our engineering teams and our field application engineers are driving that support to our customers with that design for manufacturing stack up. The optimization of the boards ensures that they can be manufactured reliably. And because of our factory management team and the work that we are doing with our factory partners, we can offer long-term continuity of supply, using our strong relationships with those factories to ensure that we have that stable supply over many, many years. To talk about where we have come from historically, we were very much EMS-led within the medical space. So that is where our business was generated from and secured. And we had limited engagement with our ODM and OEM customers. And we had limited specialist knowledge in this space, but we understood the demands that were present. Since I have joined and come on board, we have built a medical engine. We have a laser focus on key subsectors where we have strong experience, and we know we can drive value for our customers. We've done significant training across all of the local teams in terms of upskilling them, giving them the knowledge, the tools, and the resources to have high-value conversations with our customers. And we supported that with various marketing campaigns specifically targeted to our key subsectors. As a result of that, we've already achieved strategic supplier status across a number of our key global targets. We have had parts which have moved from approval into production and many more parts which are in the validation stage, which will be the growth drivers for next year. And looking further forward, these approved programs are going to ramp. We are seeing the results from the work we are doing at a local level with our engineering teams. We're getting deeper engagement within our ODM and OEM customers, meaning that we're getting involved earlier in the design cycle and working to get that design secured. We are replicating this way of working now across more and more markets to drive accelerated growth in the medical sector in an increasing number of our NCAB markets. Some of this evidence is already visible. We're now working with 18 of the top 20 global medical device manufacturers. We have seen the number of customers we are working with in this space increase. We've seen the number of part numbers we're delivering increase over the last 12 months. And more excitingly, we are engaged with 15 strategic global accounts, working with them in various ways across various different markets. I want to provide a quick example of one of the customers that we have secured this year where we have attained strategic supply status. So the model that we used was we leveraged the small amount of local spend that we had to engage globally. Then across the procurement, supply chain, operations, and engineering teams. We presented the value, quality, and capabilities of NCAB Group. And as a result of that, we were awarded strategic supply status. Since then, we've received multiple new RFQs from multiple geographies for different types of technologies, and we're already starting to see that convert into revenue in a very short amount of time. And that is really where our focus is moving forward to accelerate that and to replicate it across more and more customers across different geographies. So the platform is very much established, and the capability is proven. And now we're just converting and scaling that new business. So yeah thank you very much.
Thank you, Samuel. Thank you. That was really interesting. And this sector approach really seems successful. And it is still at the start. But now we're shifting focus a little bit. We are shifting our perspective from the sectors to geography. I would like to welcome Kelly Davidson, who is our president of North America. Welcome, Kelly.
Thank you.
I know you had a long trip.
I did; I came from San Francisco yesterday.
Yeah. Where you had a big meeting.
We had a big meeting. The global sales and marketing team met for our fourth quarter meeting in our Silicon Valley office in San Jose.
So we are glad to have you here. But it is not your first time here in Sundbyberg.
No. I've been here many, many times.
So tell me, when did you start with NCAB?
I joined NCAB about 14 years ago, right after the acquisition of P.T. Circuits. That was in 2012. And I was, in fact, the very first NCAB employee in the US.
Wow. And you have also held many different roles during your career.
I have had many different roles at NCAB, maybe even eight different titles, from various finance roles to different direct sales roles and a VP role, which was a little bit of everything, to my current president role. So, you have had a lot of business cards in the past.
That sounds very interesting. We will continue discussing with you, Kelly, but first we have a film from one of your customers.
Excellent.
Let's have a look.
What do you value most about working with NCAB?
I have always believed in relationships. I have always felt that you build a strong, mutually beneficial relationship. Just having that amazing customer service, which includes the technical support and the collaboration that we do between our companies or even between NCAB and my customer. You have some technical staff that are absolutely amazing. And honestly, I feel they definitely go above and beyond when they are more than willing to drop what they are doing and get on a conference call with my customer and help them work through their problems.
And in what ways does NCAB help you reduce risk in your supply chain?
The biggest way is by ensuring that I get good product on time. I don't have the resources, primarily the human resources that NCAB has. I cannot send someone to China every other week. It is simply not in our budget. The fact that NCAB has boots on the ground in these factories goes a long way in ensuring that what I ultimately get is good quality. You know, the product is going through the factories' normal inspection. It is like having my own inspectors performing a source inspection.
And compared to other PCB suppliers, what makes NCAB different or unique?
The people, the culture, and the customer service.
How did you get such a happy customer? Tell us a little bit about Larry Tech as a company.
So, Larry Tech is a contract manufacturer. And they came to us about four years ago with a very complex project for one of their top customers in the national security sector. And we know now that they also bid the project out to many of our competitors, and no one could help them find a solution. But between our engineering team, our local teams, and our factory management team, we did come up with a solution and we won the business and we have kept it to this day. Larry Tech is our number two customer now. It is the perfect example for me of what we do best, and that is that we do not just build PCBs; we solve problems and build relationships, which you can obviously see from the video. It was a very heartfelt testimonial. It was such a joy to do that interview.
Yeah, fantastic. When I joined NCAB in 2018, around the time of the IPO, I remember that North America was a very small part of NCAB, with an EBITDA margin of around 2%. And now you are much higher, and you have grown a lot. So. So tell me, what has been the secret during these years?
So around the time of the IPO, we were at about 4.6% profitability. And now we are north of 13%. And that did not happen by chance. There are several factors in what made the difference. One of the main reasons is that we started to focus on our customer base and really tried to understand our customers, knowing who appreciates our value and who is willing to pay for it versus just someone who is looking for the lowest price. We have become more disciplined in the way that we work. We have improved our processes, and we are leveraging our buying power. And we are really focusing on profitability and not just revenue. Our team makes a huge difference. You could see the video with Joe. We have a really fantastic team who understands what our customers need and they understand what it is to deliver value.
Tell me, as an American, Swedish companies are not always fantastic at acquiring American companies and understanding the culture. Is it so different from American culture, and how do you handle that?
It is very different. In fact, one of the things that attracted me to NCAB is the Swedish leadership style and the culture of empowerment. But that is very different from traditional American business, the way that works. So the culture of empowerment, where you make your own decisions, is terrifying for many Americans. We grew up in a culture where generally you have a supervisor. Your boss has a boss, and so on. Et cetera, et cetera. Et cetera. And many people go to their boss and say, "Well, what do I do?" And how do I do it? And suddenly you are working in an environment where you say, 'Oh my, it is me.' I make the decision. And what happens if I make a mistake? So those are scary. It is a significant difference. And we have done a really good job. I believe in balancing what is good about both cultures in a way that works very well, combining the collaborative and empowering Swedish culture with the accountability and speed associated with American culture, and I believe we have done a good job blending them. It is working very well right now.
Very good. And we will listen to you a little bit later on in the afternoon when it comes to M&A. So we will skip that for now. Other than that, what do you see? What kind of possibilities do you see for the future in North America?
I see that the possibilities are endless. Truly, I see great opportunity for growth in aerospace and defense, med tech, and also AI infrastructure. As Rikard mentioned, our CMMC Level 2 certification that we obtained this year is changing the entire landscape. It is incredibly powerful for aerospace and defense, and M&A will remain a priority. As you said. We will talk about that some more. But we have 1.8% of the market right now. And all the turbulence that Chris is talking about is providing nothing but an opportunity for us to grow. They are challenging times. I'm not going to say that they aren't, but they are also fantastic times.
Let's end there. Thank you, Kelly, for now. And I will invite Andy from China, our President of East.
Hub over here. Yeah.
So, hello and welcome, Andy.
Hello.
So, it is not your first time in Sweden either.
Mhm.
I have been to Sweden many times, and I like to see the snow as well as the darkness in the winter. Yeah.
So. So tell me, when did you start with NCAB?
I started with NCAB in 2008. So 16 years at NCAB.
Wow. And at that time, how many employees did we have in China?
We had factory management, but I was alone to start NCAB sales. Yeah.
And now, how many people do you have?
We have 40 plus employees.
I will say that it has been a major journey at NCAB. And I have had this opportunity to develop this region. Mhm.
So even with you, Andy, we will listen to one of your customers. Yes. Before we continue.
HUAC has set up several overseas branches. When we have local needs in these regions. NCAB can support us locally. Some of our PCBs have very demanding requirements, and NCAB can deliver those complex products and related services for us. We value four key things from our partnership with NCAB. Reliable delivery. Consistent quality. Strong technical support and their global reach. Sustainability is really important for the supply chain. As a global platform, NCAB carefully selects its factory partners to meet environmental and compliance rules. That saves us a lot of work. Checking ESG requirements for PCB manufacturers ourselves. What sets NCAB apart is its global factory network that fits perfectly with HYC's global growth. We don't need to spend time and resources finding and managing many different PCB manufacturers on our own. When supply chain issues pop up, NCAB can quickly switch to alternative production capacity and give us solid backup solutions. The whole industry will keep growing fast. At the same time, the fast-growing AI industry brings real challenges. We face tight supply of raw materials for PCBs and tight production capacity across the sector. Still, I'm confident that with close teamwork between HYC and NCAB we can handle these challenges and keep growing well.
Yes, that sounds fantastic. But tell us a little bit more about HYC, what do they do and what do you do for them?
Okay. HYC actually is a quite famous company in China. They are one of the first listed companies in the China innovation and tech sector, ranking among the first five companies to be listed. They are a key supplier for Apple. So what they do is they started with LCD and display testing. So for every Apple iPhone or AirPods display, they started the testing. If it is okay, the color, and the display, there are no defects on the display. And then eventually, they expanded into other sectors. Like, I think the Apple Watch is also checked by HYC, like.
And then what is your role in supplying PCBs to HYC, considering they are based in China? They could go to a factory next to them directly.
I would say that when we started with HYC, it was quite a nice story because they came to our office with a computer and then closed the curtains and I said, who is coming? There is a customer. So they were showing the problems to our engineers and there were challenges with EMC and also signals, and they couldn't figure out how to get the signal right. So they stayed in our office for two days, and they were happy when they left. And then they said, who is NCAB? Why? They can solve these problems, and we can't. So we started our cooperation. And then we slowly built our relationship. But then if you look at HYC as a company, since they are, you know, an Apple supplier. So in March, they do a lot of prototypes because the OEM has many ideas on how to do the next generation of iPhones. So in May, the prototypes must be verified a couple of times. And then in June it is a very busy time with sampling. And it must be right. And in July or August, all the production must ramp up. And in September, when you know Apple says, okay, this is a new iPhone. Suddenly, the volume increases. I see that it is a company that has different demands from idea to prototype to sample and to small volume and to big volume. They need a company like NCAB Group to support all these different phases of their product development and marketing.
And then you do more design work for them than we do for any other customer. You help them more with this.
Yes. We actually trained our people as well, not only that. We assist with some high-tech designs. If they have very high challenges, we support them. We support them with PCB Design Plus. In the meantime, we are helping them build knowledge, for example, regarding material stack-up, what materials to use for which stack-up, and also which layers. So we're building a library for them, and then they will be speeding up the design. So I think there will be many processes implemented with different departments because the customer is a big company. They have many, many divisions. So we need to work very closely with cross-functional teams, from engineers to designers, to quality, and to buyers. So, we work with quite a few cross-functional teams.
Are they your biggest customer?
Not the biggest yet. They buy about $2 million from us. However, I would say they are expanding significantly, as they have recently begun testing for batteries. They are starting to test for automotive, and now they just acquired a company for testing optical modules, which goes to the data center.
So that could be interesting going forward. Yes. But listen, Andy, you are not only Managing Director of sales in China. You're also president of our East Region. And just recently we announced the acquisition in Australia. So what do you think of that? What can that give you?
I think Australia has the best weather, by the way.
But you love Australia.
But now I have an opportunity to go to both sides, but somehow I went to Australia. Actually, it is a unique market. I would say it is typical HMLV and high requirements, as Samuel Tompson just mentioned. For example, in hearing aids, there is a brand called Cochlear. It is in Australia. It is a leading brand in the world and also serves many other segments like aerospace and defense. I think there are many characteristics that fit into the NCAB portfolio. That is why we are expanding there.
But going forward with acquisitions in the East, which countries do you think are the most interesting?
You see, we are very tiny. We are tiny in the East. When Peter shows the numbers, I think we are doing a very poor job with the lowest market share ever. APAC is a hub that people think is for big volume. That is true. But then you look at the whole market, it's huge. And there are so many markets. For example, the Japanese market, Korean market, and Singapore market are famous for high tech, high reliability, and a need for strong support on the technical side. And then Malaysia is like a manufacturing hub. So I think there is so much we could do in these East segments.
Sounds promising. Yeah.
Big potential. Yes. Good.
It has been a productive session so far. But you can always improve.
Right.
I am joking, Andy. I think we are in line for a Q&A session. So if Peter and maybe Chris will come back here, you are free to ask questions to anyone who presented before, and they can come up on stage to answer.
As well, if you want.
First, Johnny Jin from SEB is in the room.
Thank you. I hope you can hear me. Great presentations. I think I will start with two questions to you as we have you on the stage here. And North America has very promising growth prospects. Just on the M&A side of things, can you please elaborate a little bit more? How does that work in practice: are people approaching you more and more, are you using brokers, or do you have a network effect? Do you see any changes there, and how is that working in practice? Regarding the M&A process.
I'll go ahead and start. So far, there have been seven acquisitions in North America. We are going to talk about that in detail. David is going to come up, and I am going to walk you through the acquisition and development in North America specifically. We are not covering how we source acquisitions.
But I think generally, we are primarily reaching out to targets ourselves. Very few of the acquisitions have come through an organized process by the sellers. So, predominantly, it is us reaching out, either directly ourselves or through brokers, to identify potential targets.
Yeah. Understood, I ran through that a little bit faster. Maybe let's see, but I thought the medical segment also was very interesting in your part of that presentation. And I think you mentioned that you are seeing a change in the mix, as you had a high concentration of EMS players, with 95% of your customers being EMS before, and now that is shifting. So when that shift is happening, do you see a better product mix as you grow, where your margins can improve alongside that growth, or how should we think about that?
I think this is broader than just medical. I think generally we believe it is a very strong value add when we speak directly to the ODM or to the end customer. Just like we discussed, we are involved with his customer. It adds further value. And I think that is something we see in all of our industries. And in some cases, the businesses have started to grow through the contract manufacturers or the EMS companies. But I think we see an opportunity to expand our direct involvement with end customers. And actually, with that, we add more value to the contract manufacturers as well. So I think it is a general situation. I think in medical, maybe here the business started not as a focused effort historically through the ODMs, but through the contract manufacturers; and actually realizing we have quite a strong position in this industry, we are now taking more active steps to engage with end customers.
Sounds promising. I have some more questions, but I think I will contain myself.
Yeah, we will have another Q&A as well.
On the financial goals.
Thank you. You are welcome back. More questions. Yes, over there.
Yeah, I think I have, okay. Sorry. So you are with Carnegie. Two questions from my side as well. You showed two slides in the beginning that were really interesting regarding market forecast. Is it possible to break the growth outlook down into volume and pricing over the 2026 to 2030 period that you showed?
Which one was that, the AI?
That would have probably been the total growth you had. I think we have some data on that. I don't think you have it here. But I mean, part of what we're seeing now in the overall market growth is also a price component. And that is probably partly also seen here in 2026. So there is a pricing component in this as well. I think we can come back to discuss the underlying square meter growth as well.
That is partly an effect of the higher growth in 2026.
Yes. Yes.
Yeah. My other question concerns the graph, the slide with the different colors showing when more supply is expected to come to the market. Yes, exactly. Yes. And if we have the red, yellow, and green times, how should we think about pricing development in those phases? Should we expect pricing to continue to increase throughout the entire red section or fade in the yellow and then fall in green?
I wish I had the absolute answer to that. I think the best way we can look at it is that we've seen, as we started quarter three, our price at the end of quarter three was higher. So there is an expectation that if that trend continues, we will see further movement. The question we are asking is, will it continue at the same pace? Will it slow down? At what point will it flatten out? At the moment, I think until we see capacity come into the market, that remains a very big question mark. So it is not something we can answer at the moment. One of the activities we do have is our effective monthly meetings with the laminate suppliers to try and gather information. From there, what do we expect to see? At the moment, we are approaching it on a month-by-month basis. But at the moment, we are still in, shall we say, the red phase as we saw on the graph. So, I wish I had a better answer for you at the moment.
And if we look at how it is today, if we were to enter the green phase, do you think pricing should come down?
I think that is an interesting question. I think when we spoke to laminate manufacturers a number of them, I think it was two months ago, their comment was that they have been under immense price pressure for the last 15 plus years. Now it is time for them to try and capitalize on the market. So whether or not we will see them reduce or maintain, again, these are questions that sadly our crystal ball isn't giving us a definitive yes or no at this time.
But I think what we can see is, if we look at Covid times, we had a surge in demand and prices going up. At some point when we came into, say, 2023, you had a reversal where a lot of new capacity had come online, and with the war in Ukraine and the market demand having slumped, you suddenly had an excess availability of capacity, and then you saw prices coming down. I think what we are seeing now, if we come back to a situation where demand actually catches up, it is not unlikely that we will see prices go up. I mean, prices have risen. They were up 50% in the third quarter on average, so we expect to see some come down. I think, as you said, the prices were extremely low in the period 2024-2025 at really an unsustainable level. So we don't expect prices to come back all the way down to those levels. But again, there is a lot of uncertainty. We have an indication that at best, things start improving in the second half of next year, depending on how the growth happens in both the AI side and general industry. That time may be pushed out even further, so it's very hard to predict.
And one final question from my side, if I may, I think you mentioned, Chris, in your presentation that the panic buying isn't there anymore. Should we buy that? Assume that the pre-ordering that we've seen throughout '26 should not be as big of an element anymore.
It's certainly beginning to ease. One important factor in that is if we look back in parts of 2026, we saw customers perhaps loading three, four, five, six up to nine months out. What we're now seeing is the same volume over that period, but in more orders. So I don't think we're going to see a sudden order drop. If we look over a longer period, we might see the intensity reduce. But I think if we look forward throughout. 2027, we expect, as I said, the same amount of boards need to be produced, possibly more. But I think we're getting into a more workable beat rate, so to speak. And that in itself, I think, helps the factories in the industry manage with the surges that we've seen from AI. So I think for me, the key factor, and Andy, you will probably see that as well, is that we are moving out of this surge and high amount of orders, and we are moving back into a normal pattern.
Just a little bit. I don't know, Chris; I would say that if you look at the PCB, it's only one component. And then they have many components on the PCB. And look, the whole electronic market PCB is not the only bottleneck at the moment. There are many other components. There is also a shortage. So to pre-buy PCBs, a customer sometimes runs a huge risk if they do not secure the other necessary components. I believe that activity is not as significant as we might think. I believe many of these orders are real orders. And the certainty and the planning for the current environment is not like it was during Covid.
No, but the pattern is easing; I think that is the best way to look at it.
And I think we are going to see that, once customers have placed their forward orders as far out as they have visibility, at some point, they do not increase that visibility further. So then they are going to put the new order, the new months after at the end of the queue. With that, we expect to see less pre-ordering, whether that happens in Q4 or if that is something we start seeing massively in the early part of next year. That is really hard to judge. Yeah.
Thanks a lot.
Thank you. We have one question there.
Yeah. Yes. Just to follow up on that last point. So what you are saying is that you still expect the lead times to remain longer than normal, but you do not expect them to increase further. And that is what you mean when you say that the ordering patterns are normalizing.
Yes, I think that's probably correct. I mean, we see a very strained supply situation, but it's not really deteriorating. And if you have sort of extended your order book forward as a customer, then you kind of just add the following. As months go by, you do not add another six months further out because it really does not help. I mean, we are working with our factories to secure the capacity. So we are encouraging customers to share their visibility with us. But placing all the orders further out does not really help.
No, that in fact almost had a negative effect because our factories had a certain allocation of material. So when they saw sudden spikes, they would order outside of that allocation specifically for that order. And that meant you saw longer lead times, as they had to start their order the day they received the purchase order for the product. So as we are getting back into a more manageable beat rate, we are able to pull down from the allocation that the factories have. So that is where I think we will see some delivery improvements. If we look at the manufacturing and the material, lead times will be in a better place. Hopefully that answers your question.
Yes. Thank you.
Jacob.
Yeah.
Jacob Adler from Danske Bank. So just continuing this discussion a bit. Let's say that pricing moderates a bit. Once new capacity comes online, as we have talked about. What is your volume outlook in that scenario if more capacity is added to the market in H2 of 2027 or 2028, or however it plays out? Do you think it could be offset somewhat by volume allocation to you potentially increasing?
I think overall, we still see an underlying strong volume growth in the business. I think it is important to remember that regarding all of our very strong order intake that we have seen, for example in the third quarter, we still see somewhere in the order of 20% to 25% underlying growth in our sales. So yes, the pre-ordering part might come down. There might be an impact on the pricing side, but there is a fundamental growth in our industry and for NCAB.
Good. And then just the second question. We saw the graph where you showed the market CAGR of 9% between 2026 and 2030 and 8% if we take out the AI servers. But given that you also have some auxiliary products that are a bit adjacent to the data center side, what would you say your addressable market is set to grow between 2026 and 2030? Is it a bit higher than 8% or around that number?
I think we look upon the overall HMLV market as growing at around 8%. It is a little bit of crystal balling here as well to try to break down exactly the PCB spend and the different technologies and industries. So we look at a market where maybe if you take out the data centers, then it is maybe more like 7%, otherwise maybe 8% something. So we are in that range. But there is of course a certain level of crystal balling and uncertainty in all of these numbers, but that's our best estimate.
Maybe just a last question on my side. In the US, you were one of the first to get approved for CMMC 2.0, which has been an interesting advantage. I know the process behind CMMC 2.0 has been quite a costly thing to get certified for. Which might mean that some smaller competitors essentially do not even try to get that certification. Are you seeing, however, that bigger competitors are also getting approved for it now, or are you still in a kind of sweet spot there?
We have heard that one of our competitors is working on it. One of our factories has CMMC level two, and while it's not something we are hearing a lot about, we believe it will remain a competitive advantage for us. It was hard. Thank you. Yes.
What a great result.
Yes. Yes. Thank you.
Yes.
Hi. It's Gustavo here from Nordea. I thought maybe I would just come back to the pricing question. Is there a threshold where your customers feel that the pass-through does not fully work, where they actually start to get hurt?
It is a very good question. And I think what we have seen so far, when the price increases started to happen, end of 2025, early 2026, there were a lot of discussions regarding pricing with our customers. I mean, there was a lot of hard work, and there is still a lot of work, of course, to re-quote products for our customers. But I think when you get to the second half of Q2 or in Q2, our customers realize that it is not about the pricing, it is about getting availability. And I think the important part is that the PCB is still a very small part of the bill of materials, much less than typically what the components are worth in the products. So it is still not really the driving factor. Of course, in the end, I guess we can see that with PCB prices going up and components for memories, etc., rising. Going up. Overall, we are going to see the cost of electronics going up. To what extent will that have a limiting effect on electronic sales worldwide? That is hard to judge, but we don't really see a pushback specifically tied to the PCBs.
No, I think we have seen the primary question move from how do you justify the price increase to how can you secure my supply for the next 3 to 6 months? So, I do not believe that the issue is going away. I think it can still be something that, in my mind, is a concern. But as Peter said, it's more about the risk of not having the product on time when they need it. I mean, you look at Andy's customer as a very good example. They have dates in the calendar periodically when they know they are going to ramp up; the ability to have product on site to meet those dates is probably the most critical thing for them.
I think also, if you look at the factory side, the factories are bigger than the PCB factories. As a PCB factory, you need to have an order before you can buy any laminates in the market. However, I would argue that you cannot maintain all laminates as a strategic partner to support your PCB factory. So I would say that has also narrowed down the availability of PCB factories. And every PCB factory also has a certain limitation regarding its technology level. So I would say that creates an even narrower bottleneck for many different aspects. So, what do we do now in China, for example, with PCB design-plus? We design not only for manufacturability. We design for availability and design for material. So it is like, okay, if you design this for this factory, you will get this material. But if you design this technology in another factory, you will not get that material. So I think availability is still a big challenge at the moment.
That is the key currency at the moment, I would say.
Yes, thank you. And then just one final question on the build-out of new factories; as you alluded to, Peter, you saw a lot of build-out a few years back, and then you saw a lot of bankruptcies. Now you are seeing demand coming back online again, right? So is there a hesitation in building out new capacity, or is there a sort of financing risk that is not really allowing for the construction of new factories? If you understand my question, are there any bottlenecks?
No, we are not seeing it. The factories that we are working with are continuing to invest. I think we have to look at the different sizes of factories. Maybe the small to medium factories are a little bit more hesitant. Certainly, with medium to large factories, we see all of ours continuing to invest both in mainland China, and we see some outside of China. So this is why we are quite certain that, at some point, capacity will come in. We look at the laminate manufacturers themselves, and many of them are looking to increase capacity somewhere between 50% to 100% by 2029 or 2030. So there is a very strong feeling, I would say, certainly across the Chinese market that this growth is going to continue at the moment. We touched a little bit on Chinese AI, and I think that is potentially in the early phases. So I think there is a lot of optimism that there is still a lot of product to be bought, purchased, and made in China.
But, I think it is difficult to forecast. But looking at Chris and Peter coming to China, actually, we have formed many strategic partnerships with different laminate suppliers, which means we have NCAB slots reserved.
Yes.
Our factories.
That is good.
Thank you.
More from Johnny here at the front.
Thank you. If I tie this discussion to your own financial targets, if I may, quickly. And then I know you have this 15% annual growth target. I assume ten percent, or something like that, to be organic. Do you pencil in that forecast? Because on average, that is your target. Right. Do you pencil in sort of a price drop? And when do you see that? Or how does the curve look for you if you could elaborate a little bit there.
I mean, we are looking at what the overall market projection is, which has a component of mix of price development, and prices are normalizing somewhat over time. So I think for us, it is based on an average development over the cycle, which would encompass the possibility that we could have years when the market is booming faster than our average projection and some years where the market is perhaps contracting, where you have a specific pricing dynamic. So our targets are set more as over the cycle, where we may have years which are actually stronger than the 15% market growth or the 14% market growth. But actually, you may also have years where there is still underlying volume growth, but maybe prices are normalizing.
So I understand, and the medium-term definition is, I assume, for you 2026 as a baseline. And then.
We are looking at, say, the five-year rough time period, I.
Understand. And then tying that to the profitability target a little bit, if you could shed some light on this, if prices were to fall, how should we think about the gross margin development for you?
I think we have good resilience, but I will not steal the thunder from my colleague Timothy Benjamin, who is coming on later to talk more about our financial performance and our targets. So I would rather defer that question to him.
I will contain myself again then.
Thank you. Johnny.
I have one question from the web here. It's from Lisa. She is asking during periods of tight PCB supply, which types of customers or end markets tend to receive priority. Oh.
I am going to defer to our colleagues that have to deal with that.
I would say that I was surprised. It is one of the elements we need to be consistent about regarding pricing. And secondly, I would say it is about planning. Be proactive. We have been working with customers since the beginning of this year. Chris prepared a very informative newsletter regarding the market forecast and shared that knowledge with our customers. Okay, this is going to happen. And then I think you produced another one in March, April, and June.
Almost every month.
Almost every month. I believe this is how we secure priority. Because if you do not plan ahead, and you are the last one to do it, I think you do not get priority unless you pay. I don't know how much, but I would say the key for NCAB is sharing transparent information with customers ahead of when the bottleneck happens.
I think the key point is that right now, as Chris and Anna partly talked about in your presentation, we have an unfair share of available capacity. So at this time, we are not forced to restrict availability to our customers. We are still able to take care of our customers and even gain share in the current market. I think the ones that are really struggling are typically smaller factories that may not have the resources. They may have available manufacturing capacity, but they simply cannot get their hands on raw material. And those are the ones that are failing customers who are sitting with those kinds of supply chains. They are in trouble. But I think we are actually in a situation where we are, as you showed, maintaining high delivery performance. We are still performing at a high level, as both quality and on-time delivery are good. We are not only growing. I think with our customers, we are growing our share of wallet and we see new customers come on board.
So I think we need some coffee and a break. We will take a break for 30 minutes. Afterwards, we will hear more about M&A globally and especially in North America. We will also listen to Timothy Benjamin regarding our financials. And we will have a longer Q&A session at the end. So, a very warm welcome to a break and some coffee.
Thank you. Thank you. Thank you.
So, welcome back, everyone. Now, in this afternoon session, we are going to first hear from David Stråberg. He is the head of our M&A department. Welcome, David.
Hello.
Hello, David. So you are one of our newcomers, right? We have had many people who have been here for a long time. And how long have you been with us?
I have been with the company since August of last year.
It is great to have you here. Since August of last year. How many deals have you done since then?
We have been quite busy. Thanks for the great background here. I hope the credit report is good. We have signed or completed two acquisitions. We have signed an acquisition in Australia that we expect to close here hopefully in Q4.
So that is not a bad start.
It has been an exciting time. Yes.
So welcome. And the floor is yours.
Thank you. I will talk about three main things today. Why M&A works for us as a company. What the companies that we have acquired have given us as a group. And lastly, where we want to go from here. As mentioned before the break, I will also invite Kelly Davidson up here in a little while to describe how the acquisitions we've completed in North America have contributed to building that platform for us. So let me start by talking a little bit about the market that we operate in. The PCB traded market is still a fragmented market in many countries, and there are many smaller companies that are serving a local customer base. And many of these companies are still owned and operated by their founders, who themselves are reaching retirement in the next couple of years. We have an expectation that these companies will go through a change of ownership. As has been mentioned by several of my colleagues here. Scale in this industry really does matter, and it matters increasingly so. That is why when we make an acquisition, we can expect that by bringing them into our structure and giving them the benefit of the scale we have, we can increase their performance and ensure positive development for them in the years following the acquisition. The acquisitions that we make do not involve any fixed assets, at least not to a material extent. What we are essentially buying is a customer base and a local team. That team knows their local market. They have relationships with the customers in that market. So we are very cognizant of how we manage those two as we plan and execute our integration. And lastly, from our perspective, there are few credible buyers in this space. NCAB is a listed company. When we buy a company, we do so with the intention of owning them in perpetuity. And we also have a good track record of integrating companies successfully, taking good care of the people and helping them to further develop their careers. And as a result, I think we are in a good position to be selected as the buyer. Once a company comes to the market. In 2018. In 2018, when NCAB was listed on the Nasdaq Stockholm Stock Exchange, we had a local presence in 15 countries. Since then, we have completed 23 acquisitions. Most of them have been in countries where we already had a presence, whereas others have taken us into new markets. The acquisitions that we have completed have given us a lot more than just sales. As mentioned, they have expanded our market reach. We are now in five additional markets compared to when the IPO took place, namely the Netherlands, Belgium, Austria, Switzerland, and most recently Australia. And we've increased our local presence and footprint in a number of other markets. Our customer base has expanded significantly, and we have gained access to many high-tech OEMs that we were not dealing with prior to those acquisitions. We welcomed on board 350 new colleagues that are contributing to making NCAB a better company every day. And lastly, it has enabled us to build the scale that we have been talking about throughout today. But the acquisitions have also allowed us to extend our ability to support our customers. The NCAB core model has been around meeting the customers once their project is already at the volume production phase. And then, of course, delivering the logistics and delivery solutions around that. Now, through acquisitions, we have expanded what we can provide to our customers. So today, our offering encompasses design services, quick-turn PCB prototypes, as well as assembled PCBs for prototypes. And here are the names of a couple of companies in North America and Europe which have brought on such capabilities. And I think you also heard from Andy Liu in his presentation about how we have developed some of these capabilities internally ourselves in order to unlock this market. What this means for us is that, first of all, we have expanded our serviceable addressable market by being able to participate in these types of opportunities, and secondly, by engaging with the customers at an earlier step or phase of their product development process. We increase the likelihood that we are selected once the project reaches mass production. So how do we integrate companies? We follow a structured process where the target is for the company to be fully integrated within 12 to 18 months from completion. Our brand philosophy is to continue to build the NCAB brand. And therefore, after a transition period where we implement the dual branding, we will move on to full NCAB branding after 1 to 2 years. At the outset of the integration, we also follow a 100-day period. Listen and learn period. And the reason why we do that is because the companies that we have acquired have been successful. They have been successful in their own right prior to the acquisition. And we want to fully understand what it is that has enabled them to achieve that. We also want to see if there are learnings in the way that they operate that we can bring into other parts of the group. So once we have that full understanding, we will then tailor the integration process in a manner that is appropriate to the company at hand. Taking a lot of care around the core value of what we acquired, i.e. the customers and the employees. And we look for opportunities as well for how to develop the employees over the long term as part of the NCAB organization. So how do we create value after the acquisition? We have paid between 5 and 7 times EBIT for the companies we've acquired across our track record. And during the years after the acquisition, there are three main things that we look to improve. The first is we want the company to grow, and the way that we try to achieve that includes multiple factors. So the first one is we give them access to our broader product portfolio. Many of these companies will not have a product portfolio which is as encompassing as the one that we have today. We can also leverage our sector expertise locally and leverage the relationships we have with customers in other markets that may also have a presence in the market of the company at hand. The second one comes back to the topic of scale. When we start to transition the acquired company, We transition the acquired company's sourcing to our supplier base. We generally achieve a couple of percentage points in gross profit uptick. And there is also a mix element there. If we manage to shift the mix more towards high technology, those sales generally carry higher gross margin as well. And the third lever is that we look to reduce the working capital. And the way that is achieved is essentially by leveraging our commercial terms with the factories, where our payment terms in the majority of cases are longer than those of the company pre-acquisition. So through a combination of these factors, we look to reduce the effective multiple in the years following the acquisition and during that time as well, to benefit from the free cash flow that the company generates. So now it's time to hear from Kelly Davidson again. I will now welcome Kelly up on stage.
Thank you, David. Hello again. So I am going to start out by walking you through the acquisition journey in North America. And to give you a short description of what each contributed to our capabilities. There have been a total of seven. 2012 is when we entered the US market with the acquisition of D.P.T. Circuits, and this location remains our US corporate headquarters today. This is on the East Coast of the US. 2014 brought us to the central US with the acquisition of Mwave International, and this location became our main warehouse as well as our quality lab. 2019 brought us back to the east coast of the US with the acquisition of Altus PCB, and Altus brought with them some advanced PCB technology as well as some very high-tech OEM customers. 2020 was the acquisition of Bare Board Group. The southwest coast of Florida was particularly significant because with this acquisition, we gained Taiwan sourcing as well as a true Taiwan factory management team and the ability to source ITAR-controlled products offshore. 2021 brought us further west to Arizona, and we gained some technical team members from that organization, which we still have today. 2023 brought us all the way over to the West Coast, to the tech capital of North America, the Silicon Valley, with the acquisition of Phase 3 Technologies. And through Phase 3 Technologies, we gained design capabilities. We gained quick-turn NPI prototyping, and we also gained PCB assembly capabilities as well as South Korean sourcing. And most recently this year, we acquired Boardshark, and they are on the east coast of Florida. And with the Boardshark acquisition, we now have a true quick-turn PCB model. So you can see each of these acquisitions brought something unique to our portfolio. Today we have seven locations coast to coast, and we have 105 employees. The way that we sell in North America is through two different platforms. One is our own inside sales teams as well as our outside sales teams and key account managers, so NCAB employees, as well as an extensive network of independent sales reps in North America in both the US and Canada. And between the two platforms, we have broad market coverage. I really like this visual. So you can see the growth, as we talked about. We have grown quite a lot. We started in 2018 with 30 million in annual revenue. And this year we are at 122 million for the last 12 months. So we have quadrupled our revenue, but we have not just grown in terms of revenue. We have also tripled our profitability. Essentially, we've gone from 4.6% at the time of the IPO to over 13%. And back at the time of the IPO, we were 16%. We in North America represented 16% of the group's revenue. And this year, we are on track to be 25% or maybe more. So obviously we have grown through acquisition. They have really added to our capabilities. We have also grown organically through key customer development, by expanding our sales rep network, and by entering higher-profit markets. And so you can see that these acquisitions provided the foundation for our organic growth. We have grown upon it. We're a completely different organization than we were when we started. So back to you, David.
Thank you. That is a really exciting and inspiring story, I would say. Looking ahead, we have three main priorities. We want to continue to consolidate the markets that we already know. So, namely North America and Europe. We say all else equal. Probably, if you look at our market share, which is 2% in North America compared to 4% in Europe, we will place a little bit more emphasis on North America going forward. Secondly, we plan to enter new geographical markets as well. He mentioned a couple of countries that we have been eyeing, and we are engaging with companies there, mapping out the markets. What is really key is that they are a fit for the NCAB business model. And thirdly, you heard a little bit about how we have expanded our capabilities over the last couple of years, and we will look for additional ways to do that where it makes sense. Our core criteria remain unchanged. We will continue to focus on buying asset-light trading companies with no own production. Strong local relationships, capable teams. And we want the companies to have a solid historical track record. We have a pipeline consisting of some 300 companies, which represents our long list essentially to a greater or lesser extent. These companies are all involved in PCB trading. Our short list and the companies that we know to a greater extent consist of around 50 names, with a combined turnover of 3.8 billion SEK, which gives us plenty of runway. And the way that we approach M&A is that I represent the group M&A function. But I am not alone in this. I work very much through our country organizations in order to identify targets, and in some cases, reach out to them and leverage relationships that are already in place. And we do utilize external advisors where appropriate. Most processes are not initiated by us, but we do spend the time in cultivating relationships with founders and owners with the expectation that maybe they do not sell tomorrow, maybe not in six months, but when the time is right for them to sell, we want to get the call. As I have mentioned before, I believe we have a good reputation in the market. That is a good asset for us when we engage in a discussion about the next company to buy. So, to sum up in four key messages, M&A is a core pillar of NCAB growth. It is proven. It is repeatable. We also have a track record of being able to deleverage after acquisitions. The market remains fragmented. We have been and will continue to be disciplined around our criteria, as well as what we pay for the companies that we buy. And lastly, we have an active pipeline across all regions. There might not be activity for a period of time, such as no announced acquisitions, but we are continuously working and we feel confident that this growth journey will continue. So thank you. Now it's time for our financial section and also a walkthrough of our new financial targets. So I will welcome up Timothy Benjamin, our CFO, to guide you through it.
Thanks, everyone. I am very glad to be here. I will take you through our financial performance, both historically and in the future. And talk a little bit about our new financial targets. Despite maybe Johnny wanting to steal my thunder a little earlier, that's okay. But before we get into that, I think it's also really important to look at where we have been. Where have we been? I think you heard a lot from my colleagues earlier talking about this platform that we've been building for the past 30 years and trying to create quite a moat for ourselves. And when you look at it and look across a broad selection of the different KPIs for NCAB, I think you find a very interesting story. So when you look at the top line, since IPO, we've been growing the company both organically and inorganically at a rate of about 14% per year on average. When you look at the gross margin, a lot of you have expressed interest in that and also noticed its development over time. We have invested a lot in the platform, as you have heard, especially on the engineering side, helping to create more value for our customers. They appreciate that. And then we've also been able to take the gross margin from around 30% up to around, say, 35% to 36% in a normal market period. And in the latter half of the business cycle, sometimes we see it even higher than that. So you can imagine that in the different parts of the business cycle, the gross margin varies a little bit. In the beginning it might be a bit pressed and at the end a bit higher, but on average around 35-36%. And we've been pretty consistent with that over the past couple of years. On the SG&A side, I think, again, you've heard a lot about the investments that we've been making. We are not afraid to make those investments just in good times. We make those throughout the entire business cycle. As we make those investments, you can see, for example, in the last upturn, we had settled at around 18% as we entered a bit of a weaker market period. And we also saw prices change and go down a bit. You saw our SG&A go up a bit. That was, again, a little bit intentional. We are investing for the long term. I think we are seeing a lot of that pay off now. So you see the SG&A percentage in the last 12 months coming down again. And that is a very nice direct contributor to our EBITA. On the EBITA side, I can say the growth rate there has been over 25% on average per year. So, exceeding the growth rate on the top line. Very good leverage development over that period, up to just south of 600 million SEK for the last 12 months. If you look at quarter three, for example, that was actually a little bit above 200 million SEK in that quarter alone. So we have good momentum on the profitability side. So the last 12 months, just shy of 13% at 12.5%. But again, if you look at quarter three, it was above 14% for the working capital side, and I think you heard a little bit from my colleagues. We employ an asset-light model here. So we try to keep the working capital in the single-digit range. Sometimes it will drift higher than that, and sometimes it will drift into double digits. And we are very happy about that. We actually deploy our working capital as a very useful tool to be able to support our customers in tough times, and that allows us to build a relationship with them and continue taking market share as they know that we are going to support them through all stages of the business cycle. And I think when you think about NCAB, one thing that should come to mind is that we have an asset-light model. And you heard we don't own any factories, and we don't want to. And because of that, we have a very cash-generative model. And you can see that a little bit here. When we look at the cash flow from operations, we generate quite a bit of cash flow. When you look at our EBITDA, typically we are in the sort of 70% to 80% cash conversion range. When you look at our EBITDA versus our actual cash flow. And then you ask, what do we do? What do we do with that cash flow? We will talk a little bit more about that later in this section. But you can see that we try to reward our shareholders in two different ways. In one way, we are taking the opportunity to invest in really good acquisitions and building the platform larger for the future. But we're also rewarding our shareholders with consistent dividend flow. I think with that, you've seen our market capitalization grow significantly from IPO, a bit of a peak in the COVID times, and a bit of a cool-off period. And now you start to see the market recognize the value in NCAB again, which we are very happy to see. I think when we look at it from a shareholder perspective, what I'm very proud to be able to say is that if you invested in 100 shares at the IPO, you probably paid about 7.5 thousand SEK. If you look at what we've done with the platform since you invested in those 100 shares, we've increased the value of the company equivalent to you of around 75,000 SEK. And we have also been able to reward our shareholders with dividends as well. So from a shareholder perspective, we have delivered 12 times their original investment with over 1000% return since the IPO. That is a compound annual growth rate of over 35%. And we are consistently paying out dividends. The last dividend that we paid was 1.16 per share. We think we have positive developments in that area coming forward. If we then look a little bit at where we are going. And I know there is a lot of interest in this section. So hopefully I will answer some of your questions here. Again, bearing in mind we have no crystal balls here. We are very transparent about that. So if you look at the revenue side, where have we been? We have been growing at a rate of around 14% through the last 12 months. Quarter three 2026. Where do we go from there? Well, based on everything that you've heard from the group earlier today, all the platform building that we've been doing, all the M&A that we've been doing, and all of the customer offering that we have now, we see it as a very reasonable target that we can achieve around 10% organic growth per year during this period. We also look to grow with around 5% inorganic growth over that period. That brings us to around 15%. And I think some of the questions earlier were spot on. How exactly do you think that growth will come? How do you think it will come, year one or year two? How do you think it will materialize? Pricing versus volume. Again, we have no crystal ball here. We do not know exactly. But we do see the competitive advantage that we have built over the past years that gives us the possibility to pursue a target that is above how we think the market is going to grow. So you heard from Peter. We expect the market itself to grow 7% to 8%. We think we can grow that and take market share as well based on the value we add for our customers. That said, I think it is also important to recognize that while we do not have a crystal ball, we know that the data center build-out we see already on the US side and the upcoming data center build on the Asian side will have a very strong influence on PCB pricing in the near term. We know that we saw that already in quarters one, two, and three. And I think quarter three was far and away the strongest pricing environment that we've seen in the past few years. I think it's important to understand that the growth rate will periodically come above the 15%, and in some years it will be a bit below. But we do think when we look some years out, where should we be a few years from now? We do think 15% per year is the right level. It can be a little bit higher and a little bit lower. The reason we feel confident in that is that we know we can invest through the entire cycle. We have been investing. We did not cut resources too much in the last downturn, and we have some really good people in this company. You heard from some of them today, but there are many out in the wider world that we think can really help us take market share over the next few years. I think the other thing that I am very proud to be able to talk to you about today, and I think this comes on the back of a lot of work that has been done to build this platform that is larger than any other HMLV platform in the world. If you look at where we've been and what we've done over the past years, you can see that we started out this company at IPO at around 8% EBITA. And through the last market cycle, we saw it go all the way up north of 14-15% and then come back down in the lower part of the market cycle. And we had an implied financial target at that time of 12.5%, which as you can see, we are already above in quarter three. So we are in the last 12 months at the 12.5%, and in quarter three, we are already above it. I think what's important to also remember when you're looking at these numbers is that in the last few years, 2023, 2024, and 2025, we've also been investing heavily in a new ERP system across the entire group. We have now completed that as of November. Andy's team did a fantastic job completing the journey with five entities live at the same time. So we've invested a lot in that platform to get additional synergies, to get additional view on our customers and how we can add value to them, and how we can work very efficiently as a company. So we've made all those investments now. Now those investments will fall off a little bit. I am sure we will find other investments to continue driving value, but those costs are now gone. So when we look at the growth potential that we see in front of us, and we also think about the leverage that we should have, we see that a 15% EBITA target is a very achievable one. There will be some years, of course, that will be above it. There will be some years where we think we can be a little bit below it. But if you look at where we were in the last portion of the market cycle, at the 11% to 12% range with an ERP rollout, we don't like the idea of going below 12.5% in general. So we're looking to stay at 15% on average, sometimes higher, sometimes a little bit lower. But that is a new profitability corridor compared to where we have ever been as a group. But we're quite confident in this, given all the platform building that we've done and the investments that we've made over the past years. I think you've heard a little bit; David made a great description of what we see as the compounding engine of NCAB. And those of you who have been following us for a long time have seen that value play out. If you look at the amount of cash flow that we've generated since 2018, we've generated about 2.4 billion SEK of cash flow. We have then reinvested that cash flow in the compounding engine through M&A to the tune of around 2 billion SEK. We've also, during that same time, been able to consistently reward our shareholders with just about a billion SEK of dividends as well. Based on that, I think it is also really interesting to look at the financial position that the company is in. So you can see here how we have varied a little bit during the years, but the prior target that we had for leverage was less than 2.0. The new target you may have seen today is somewhere between 1.5 and 2, depending upon where we are in the market cycle. What is going on with M&A? All of those things. What's particularly interesting about that is, even though we've put 2 billion SEK into M&A and even though we've put a billion SEK into dividends, at the moment, we're even below that target range. So I think the way to think about that is that we have a very good capability right now to make the right investments, either in people, in more acquisitions, or in dividend capacity. So I think we have ourselves in a very good place, especially for this part of the market cycle. And I think the other thing that's good to remember is that we've been quite consistent on the dividend side since 2020. There have only been two years where we have missed paying a dividend, and the year directly after each of those years, we have given our shareholders a little bit extra reward as we have navigated those challenges. I think the thing that is also very important to understand and recognize is that throughout this time and throughout these challenges, we have had a very good and very stable banking partner. In late 2024 and into 2025, we worked with that banking partner to expand the relationship and improve the agreements we had with them. So we now have ourselves on an even more secure footing. Sure footing when it comes to financing. And I can say our banking partner has done a fantastic job in that regard. So we're very proud of that. With that, we feel quite confident saying that when you look at our updated dividend policy, the way we think about that is that we would like to distribute the available capital that we have. So, of course, we will take a look at what M&A opportunities David and the rest of the group see over the next few quarters. We'll take a look at the financial position and then we'll establish the dividend for that year. But I think, given the cash-generative nature of NCAB, I think we will continue rewarding our shareholders in a very good way when it comes to dividends. With that, I hand the word over to Peter.
Thank you, Tim.
All right. So trying to wrap up a long afternoon, I feel really good about the fact that we are back on a growth track, both on the revenue side as well as on the EBITA side. And I think we have all seen the order book that we have with us. So we're going forward with a very strong momentum. We have, as a company, a very strong set of unique selling points. We have the unique setup with our strong local presence with the customers, where we not only have sales representatives but also have engineering capacity, quality people, labs, etc. To really be able to provide superior process support for our customers. We have economies of scale in terms of efficiency, buying power, and logistics solutions, while also providing IT infrastructure connectivity for both customers and partners, alongside efficient internal tools. And we have a factory presence, a really unique factory management organization present in all of our regions, working closely and daily with our factories, which really gives a total package that is very hard to replicate. The core of what we haven't discussed as much as part of the presentation today is that we are still very much a decentralized company. And I believe that is the strength of the company. It gives us a very fast, agile motion. When something happens in France or in China, it does not have to come back to me, and I do not have to be the one making the decisions. We would have Andy in China, Kelly in the US, or our French leader, Carole, acting on this immediately before I even know about it. And I think that decentralized motion is very important. We make hundreds of thousands of small business decisions every year. We are not in a business where we make a handful of decisions that need to be synchronized to determine the company's future; rather, we are in a business where a multitude of decisions are being made constantly. And that quick action is so valuable to us. But to make that work and to still act as a coherent company, we invest a lot in our culture. It starts with a strong foundation around our values, which we introduce to all of our new employees, and which we work constantly to refine. We conduct a significant amount of training across our various organizations, bringing people from different parts of the group together to build that strong network. And we still try to bring the whole company together on a regular basis to really exchange experience. This is really valuable, especially when we make the number of acquisitions we do, because if we acquire a new company in Australia, it is hard for them to integrate into the NCAB culture while being so far away from everyone else geographically, but through these kinds of interactions, such as inviting them into sales trainings and our global conference, we build that global network across the group. So we are a company where it is not either decentralized or scale of economy. We try to do both. The decentralized culture is at the heart of our business. But over the years, we have gradually started to pick up some of the low-hanging fruit in terms of economies of scale. So you could say it starts with our purchasing power, building the global factory portfolio, and having the factory management to support all of our local companies out there. The local companies still decide which factory they want to source from, but Chris Nuttall and his team provide them with a smorgasbord for them to pick from. We, of course, leverage our marketing. We invest in our brand, the NCAB brand. And historically, that was maybe not a leading factor. Now NCAB is known wherever we go. And the customer sees a strong value in this. So we continuously invest in this. We do a lot of marketing and technical seminars with customers, which also helps to drive our business forward. We can build increasingly efficient logistics. We are bundling shipments to get cost efficiency and also better flexibility for our customers. We also have the business systems to support the use of AI both internally and to make digital connections to our partners. We have worked with global account management, starting with some customers who are now working internationally. That was maybe how some of the businesses started in China at one point. Now it is predominantly local, but this global account management is something that further accelerates growth and locks customers in. And finally, we are taking the next step with the sector-led approach, where we are seeing the strength around certain engineering or industries, and we are really trying to scale that up and expand that globally from being maybe a success in a local region. We are a company that is clearly the global leader in outsourced production and supply of PCBs. So we are in a fast-growing market. We are the global leader, but with a very small market share. So we have a lot of opportunity to continue to grow both organically and through acquisitions. And our strategy is quite simple, but it is something we continue to build on. We stay 100% focused on PCBs and we stay asset-light. We don't want to own factories. Our customers should always feel that we are using the best factory for them, rather than trying to keep our own factory loaded. Still, even if we don't own factories, we invest in technology process efficiency to continuously provide better service for our customers and by that grow our market shares in the market. We look to expand geographically, and we see M&A as a good vehicle for this. We are really very much in a relationship business. You could almost see it as a service business, but we happen to get paid through the product, and that is both good and bad. It means that it is an extremely sticky business. We need new customers, however, it takes time, and we need new business. Starting a new business in a completely new market is even more challenging, as you must start afresh to build awareness and find customers. So acquisitions are a very good starting point for us. And that is how we view the acquisition in Australia. It is the first platform from which to build further growth. And then we have the consolidation prospect. This is still a very fragmented market in both Europe and North America. We see great opportunities for consolidating, and with the consolidation and growth, we see further and further opportunities for finding efficiencies in terms of economies of scale and also to build new capabilities. We have set a new set of business targets. We have an ambitious growth target of 15% going forward, of which we see two-thirds being organic and one-third coming predominantly through acquisitions. We are lifting our ambition regarding profitability to 15% over the cycle, and we are targeting a net debt to EBITA ratio in the range of 1.5 to 2, which should also provide us the opportunity to maintain a good dividend policy for our shareholders going forward. And we are continuing with our work in the sustainability area now aligned with the SBTi targets. I really feel that today you had the opportunity to meet some of my colleagues. I am very proud of the team we have, and we truly have a global team. As you have noticed, I think on this chart alone we have some 8 or 9 different nationalities. So we are no longer a Swedish company. We're really a global company. And also, as you think, I've seen a good mix of people with extremely long experience in the industry, some from within NCAB, some from outside, but also some new blood coming in with new ideas also from other areas. So I think we're in a very good position to take the company forward. But even more importantly, it is really about our close to 700 colleagues around the world who are all committed to our values of quality first, strong relationships, and full responsibility, and are all in a position to drive the company towards making PCBs easy. And with that, I thank you for today. And I guess we will open up for further Q&A.
Up on stage for our final Q&A session. So. So I open up for questions in the room predominantly. Yes.
Thank you.
But I. Oh, okay. You mentioned the work with your factory portfolio. So if you could compare that portfolio today with what you had in 2022, what type of volumes can you access today versus then?
I'm not sure if I fully understand the question, but if I look at when I joined in 2020, our main factory portfolio today consists of around 35 factories, which cover maybe 90% to 95% of our spend. That was a little bit lower, somewhere between 25 and 30. So we are both growing with the factories we are working with, but we are also adding more factories to our portfolio, partly to diversify sourcing, to cover sourcing from more regions, but also to have more capacity and in some cases also add new factories with new capabilities.
The question was aiming at, let's say, if you had owned the factories yourself. What type of utilization would you have then, could you deliver 30% more with the same?
I'd say we are not restricted in terms of the capacity from our factories. In fact, our aim is to be somewhere in the range of ideally 10% to 20% of the factory's capacity. If we're in that position, we would clearly be number one, or at least top three of their customer base. And that gives us the opportunity, if we needed to double our access to that factory, they would need to add maybe 15% of their capacity, which is probably doable over time. We could also take away half of the business from them. If we were to be, say, 50% of a factory, they could not double or we could not double with them, or we could not take away half of the business, then we might actually put them into bankruptcy. So for us, it is much better to have this level where we are clearly number one, or at least top three. That gives us the priority, both commercially and strategically, and also allows us to work with them to invest in special technologies. But we're not restricted. We still have flexibility to scale up and down.
All right. But if you just compare your revenues now, they are roughly at the same level as in 2022. I guess you have access to more factories now than in 2022. Or to continue to grow, do you need to add a lot of new factories to get volumes up for your customers?
I think we will continue to grow our factory base, but we will grow faster in revenue than the factory base. I think the factories are also expanding their capacity. So it is about them expanding, and we are growing with them. And we are remaining a leading customer of the factories.
And I think you heard a little bit from Peter as well that, because we maintain that strong relationship with them and we tend to be a top 1 to 3 customer, if we need to expand within their factory, we have the credibility and the relationship to do that. Whereas smaller customers may not.
Chris, do you want to add something as well? Maybe.
You get the microphone there.
I think, as Peter said, the ability for us to work with our factories as they scale up, that has been one of our key strategies. If we look at our 35 main factories, we're probably working with about 15 of them as they put new plants into effect or grow their technology. So I would say in terms of the volumes or square meter capacity, I think we're in a very good place. Additionally, we are also working with them as they move up the technology ladder. So this means that as we bring on new technologies, we're not having to get to grips with a new factory. So we are in a very secure place as we look forward. So I think, as I said, in terms of the square meter output, I think we have the technology that continues to grow. So I am feeling secure about what we are doing with our sourcing activities. A bit of a long answer to a short question. I hope that is okay.
So next question. Jacob Adler.
Yeah. I had a couple of questions starting with M&A. In the last 3 or 4 years, you've added 200 to 400 million from M&A per year. You have completed approximately 2 to 5 deals per year. Now, given that you are targeting around 5% coming from M&A per year, that means you will likely need to be at the upper end of that historical interval. So my question is really, do you expect the deal size to increase going forward or essentially do more acquisitions per year?
I think that we are engaging in many different discussions. Some companies are larger, some are smaller. It is difficult to schedule when those larger opportunities will take place. We expect roughly the same volume on average per year as in the past. And the fact is also that the companies that are in our pipeline are also benefiting from the growth of the market over time. Yeah. Does that answer your question?
Yeah. Very good, very good. The second question on M&A is that we heard with Phase 3 how you've added PCBA capabilities and also quick-turn prototyping. Are there other adjacent opportunities that you can explore with M&A outside of the core NCAB capabilities that may be in the pipeline outside of these areas?
Do you want to take a stab?
I mean, we are looking at our core business being centered around the PCB. And of course, there are areas where we have strengthened our services around the different phases of the value chain. So, in the case of Phase 3, their focus has very much been on super high-tech advanced prototypes for boards, where ultimately you have a customer like Broadcom or Nvidia saying this is great. Our R&D department says: you got me the board; my partner for normally building the high-volume production, Foxconn or wherever they are, is completely refusing to build prototypes for me. Can you help me get components on the board. And I think that developed an opportunity to expand the services around the PCB. And I think that is probably something we will be looking at moving forward. And there can be areas in all kinds of the value chain where we can provide those kinds of services. So, we are looking at how we can further strengthen the surrounding services around the PCB, but we're not looking to expand into other business areas.
Last question on my end. I am thinking about OpEx growth ahead now that the ERP implementation is complete. It has been quite a big investment during these slower growth years as well. At the same time, you have kept the headcount quite intact. And now you have started to hire people. So as we look ahead, where are you? Where are you seeing the main OpEx investments? If you understand the question. No, I mean, I can say I think we have 686 absolutely fantastic colleagues here, but there is, I think, always room to grow a little bit more. There are still white spots all over. And I think specifically, when we look at adding competence that our customers really appreciate, we often see that it sits in engineering resources that sit close to the customer. I don't know, Peter, if you want to add anything.
No, I think that's right. I mean, we have opportunities to continue to grow. And we will, of course, be investing more in our sales opportunities. A significant portion of our sales is being driven by these initiatives. It is shifting more and more from just being a salesperson to being a sales engineer. So I think we are investing more and more in engineering to provide that value-added engineering to our customers.
Thank you.
Thank you, Johnny.
Thank you. Great presentation and great job with the finance team. Thank you. Now, coming back to the annual targets. Now, coming back to the growth targets. I mean, you are targeting an organic growth of 10%. And I know you are referencing the market data. And that implies some sort of two percentage points above that.
Yes.
Given that you are in the mix, you are growing within fast-growing segments, and you are also gaining market share with your current customers. Shouldn't you really be able to grow fast, assuming we go by the market data, and given that you are able to grow at least five percentage points above the market?
No, I think that the level of market share growth that we are planning is a reasonable one. I think nobody has a crystal ball for exactly what the market will be. This is what Prismark thinks right now. But when we look at what we think we can do in any market environment, be it good or bad, and considering the white spots that we see out there, we think 10% is a reasonable level. And I would say most of that is volume growth.
Okay.
And then a little bit on the 15% EBITA margin target. Yeah. I mean, how dependent are you on this sort of 15% top-line growth to reach that, if you understand my question, because in previous years, we've been able to deliver a 15.5% EBITA margin on significantly lower top-line levels. And as you say, that gross margin should be rather stable. I mean, shouldn't you be able to reach higher, like 16, 17, or 18% EBITA margin, or is that?
I think you have to remember a very good point, as usual, Johnny. Very, very good points. I think the thing to remember is that when we look at these targets, we look at them over the market cycle. So we think about the good years, the peak years, and also the bad years. And when you look at it over the entire cycle, we think 15% is an EBITDA margin level that we have never reached before. But we think with all the investments that we've made in both people, ERP systems and otherwise, we think we are well placed to be there on average. That does imply that some years will be below it, and some peak years will be above it, for sure. Both ways, I would say.
Okay, just one final question. I mean, if you are growing now from this base and onwards, then the trough level of the EBITA margin should be higher than where you troughed at some point. Yes, just below 11% or something like that. Right. So, I mean, should it be higher? Yeah.
So, I think you saw in the slide that we presented earlier that we're not interested in going below 12.5% in the future.
Great. Thank you.
Great.
We have Gustav and Brod.
Yes. Thank you. So I thought maybe just come back to the margin here. Peter, I think in Q1, you said this year that the North and East are possible to reach margins above 15%. And then, you know, Americas and Europe are more in the range of 10% to 15%. Has there been any structural change to this?
No, I think we still have a situation where, in the Nordics, we have very strong market shares. It means, of course, that we have higher sales efficiency and a greater hit rate on quotes than if we were in a market where we have a small market share, constantly chasing new customers. So I think there is a good historical track record in the Nordics, and we should continue to have good profitability in the Nordics segment. In East, we have a very focused approach on niche applications. We are providing a lot more design values and other services, which has enabled us to target specific niches in the market, but we also see the other regions climbing up in profitability. However, there are likely somewhat different characteristics in the Nordics and East that set them apart compared to North America and Europe.
Thank you. And then, just to come back to the M&A section there. I mean, I think last year you actually posted the figures on what they implied. The EV/EBITA multiple was three years out. And now we did not get that figure. So, is it possible to provide any comment around that? Is this basically the same level?
I think the level hasn't changed. Of course, now with the market situation as it is, you also have to keep in mind where we are in the cycle. So again, we try to stay disciplined and cognizant of that fact as we make additional acquisitions here in the next couple of years.
Perfect. And then just one final one. I mean, we talk a lot about market share gains, etc. . Can you just elaborate a bit more on how much that has contributed? And what you think is structural? When you see a normalization in the market, are we expecting to see a lot of customer losses?
I think what we tend to see is actually that even though, especially for Chris's team and others, everyone is working on sales handling, price changes, and supply challenges, these are tough times, but the tough times are really good for us. I think these are the times when customers realize the strength in our supply chain and the resilience of our supply chain. And I think we saw that very clearly during the COVID period, where we were successful in both winning new customers and growing our share of wallet with existing customers. I think we are seeing something similar again. I think for us, it is actually much better when the world is turbulent. If the market is completely steady, then you always have customers who start thinking, well, do I really need someone like NCAB? Or could I just buy direct? Maybe I can cut some costs by buying directly. And now they realize they cannot. I mean, we've had a number of customers during this year who had a direct sourcing strategy, and one of them, which is actually a large, significant contract manufacturer in Europe, said they had one or two Chinese factories they could no longer buy from. I was sourcing part of my business from Israel, and that is currently problematic. And I had one European factory and they closed down, and I was sourcing myself. So I have no team who can help me move. And I think they are not unique. I think now is an opportunity for us to win customers. And I think also when we look upon the market, sometimes we compare with other trading competitors. Yes, we compete with them, and we compete with local factories. But there has also been this part of the business where end customers are sourcing directly in Asia. I think sometimes that has been seen, maybe partly as a market that has maybe not been so easy to access because they are accustomed to buying direct themselves. That is a market that is now opening up because they are having huge problems in their sourcing from Asia. So I think this is where we're now finding new customers and opportunities to grow with them.
Just a follow-up there. It is a very good point. Interesting discussion. If you think very long term or even a little bit longer term, we also see a tendency toward contract manufacturing consolidation right now. And they are getting bigger. Your advantage is very clear right now. But how should we know it is not just cyclical rather than structural, if you do not mind my question.
No. But I think if we look at this over a longer period of time, we are working with some of the leading growing contract manufacturers, both established in Europe and North America, and we are growing that cooperation closer and closer. So I think they value our position. We add value to them. And just like Larry was saying, we add value for them in the dialogue with their customers also. So I think it is a very symbiotic relationship. And I think that is working for both parties.
I think it becomes a relationship that is deeper than price. I think we are offering value-add services at the moment that have gone beyond any price challenges that we face. And I think, as you've heard from Peter, if we're talking about the technology support, the DFM, the phase in front of our customers, that holds true in tough times as well as good times. So we are doing the hard things for our customers and supporting them in ways that they cannot. And that is still going to be needed. Whether you're in the peak or trough.
Then I think you will always see that most of our contract manufacturers have some part of direct sourcing where they have high-volume projects and so on. Just as some of our factories are also selling direct, they say they are selling their high-volume projects partly direct. And we are handling the vast mass of smaller industrial customers in weaker times. Then you would, of course, always have to ask where that gray zone is. Exactly. But I think there is a clear understanding that we add a lot of value. We give the factories access to a part of the market. They will struggle to serve themselves well. At the same time, we also give larger contract manufacturers access to a factory base that they cannot access themselves, because even the larger contract manufacturers, when they look at some projects where they have volume, yes, they might be able to get access to a good factory. But once you start going into high HMLV projects and you need a different portfolio of factories, they become very small. And then they say, we can give them all the access they need.
I think, as you said, from the other side as well, our relationship with the factories is key. They don't have to have thousands of relationships with individual customers. It's the relationship with us, and we manage this part of our work with the customers before it gets to them.
Understood. Just one final question from my side. On the M&A side of things, do you experience a situation now where you don't really, because multiples are clear regarding what you pay. But I mean, earnings levels can be inflated right now. Do you find a situation where it is a little bit harder to come to an agreement because you do not want to pay too much on a higher earnings level? Or can we see something like that in the near term?
I think most of the founders who we are in discussions with have been in this industry for a very long time, and they understand there are peaks and troughs to the market as well in terms of where we are in the cycle. And it's difficult to judge where we are now. And you know where things are heading here in the mid-term. I think they can be realistic, and we tend to have a dialogue with them about the past performance. We look for an average over a couple of years as a fair representation of what this company can deliver.
And typically in an up market, we would probably pay a slightly lower multiple. In a low market, the multiple looks a bit higher, but the valuation is probably more based on the longer-term performance. If there is an expectation of significant fluctuation, that is when we work with earnouts as well. So that we can remain encouraged to make a deal with the company; even if the market is in a trough, we say, well, if the market comes back, we are happy to share part of that pick-up, if we believe in that, or at the same time, if the market is booming, we ask, will this really last? Again, we can tie part of the payment to an earnout to protect both parties.
Thank you.
I have one question here from the web from Catherine Thompson. She asks, considering that a medical customer would want to ensure the availability of supply for as much as ten years, what is the track record of factories in your network.
In terms of longevity.
Longevity.
Longevity.
Do any end up disappointing you and have to be dropped?
The factories are very, very few. I can say in the 20 or so years I've been involved in this industry, there's probably one factory where we've been disappointed. That is because the Chinese government moved them from one location to another. What we have done over the years is that our sourcing process is quite long. It is very detailed. It covers multidisciplinary requirements. So if we are picking a factory that disappoints, our sourcing process has not delivered. And when we bring a factory on board, our aim is that we qualify them specifically for a set amount of time. So I think we've got a very good track record where we've not had to exit a factory because of poor performance. For sure, we have had to work with factories to improve performance, but our aim is to have long-term relationships with the factories, especially the ones that are going to grow and invest.
Very good. Then I have another question from Daniel at Handelsbanken. Can you find enough supply for the defense industry in the EU from sovereign sources? And also, can you certify the PCBs somehow, ensuring customers that the PCBs are not manipulated and cannot be switched off by cybercriminals?
That is quite an interesting question. My gut feeling is, where is Rikard? So I will invite him to contribute. But one of the points that we have is that all of the factories we work with have to sign a number of agreements, and part of those is a customer protection agreement, which dictates how data is handled. That is how they secure the data, not in terms of supply, but how it is distributed within their own facility. So we've got quite a secure element there. We have the supplier Code of Conduct which supports that. And I think if I hand over to Rikard about how we securely handle the data to transfer, he can probably answer better than I can.
Yes. So part of the audit process, when we approve a new factory for defence, is to ensure that they work with information security and how they handle everything from their own employee background screening and all of that. And there are also external or third-party protocols to ensure that all communication with them is handled securely. So, I mentioned the NCAB secure portal. So that's an information portal to make sure that we secure the communication. An employee that works both in our legacy system and in NCAB Secure. You cannot copy or paste any information. You cannot perform any unauthorized actions. There are structured processes regarding how you work. Can you sit in an open environment when you look at technical data? Well, you can if you have no one behind you, but you cannot sit in the middle of an open landscape, for example; that's just one tiny detail regarding access control. So when it comes to the number of factories for aerospace and defense in the European Union to support defense. Regarding that, well, I mentioned geopolitical factors before, and there are a lot of customers today that say it has to be produced in Europe, outside China, or must be domestic USA. So we are continuing to work on developing our factory base. And it is sometimes a struggle. Absolutely. There is one new PCB factory being built in the European Union at the moment, and that is it. And one or two are reopening that are applicable for aerospace and defense, because there are a lot of PCB shops or PCB factories, but not all of them are suitable for aerospace and defense. So we are working on qualifying them to ensure that we have the relations with them. There was Electronica last week in Germany, where we had the opportunity to once again meet with not only the factories we already work with, but also factories we do not work with to make sure that we are part of their network. As referenced earlier, we grow with our factories. Factories are expanding capacity, which are on a growth trajectory, aiming, for example, for space approval or whatever the requirement may be. So it's an ongoing process where we do qualify them. it. Is it easy? No, it is not. But we're trying to make it easy for the customers and make sure that we always have enough capacity for aerospace and defense.
And the lead times in defense are quite long right now.
It depends a lot on the application. We have factories that have 16 weeks for quick turnaround and factories that have maybe four weeks for a quick turnaround, and for volume production, it could vary. Yes, it varies between high and low volumes. So there is capacity. But yes, it is very much depending on the application and the project.
Thank you. Are there more questions?
Yes. So you talked a bit before about whether the share gains you are seeing in this upcycle will be persistent. And I was wondering if you could provide some context for that, perhaps by discussing how frequent customer losses have been historically and what the reasons are for customers departing?
I think attrition is extremely low in our industry. We want to hold on to our customers. You can always lose a quotation for a new project. But I think what we saw during the early part of COVID, we gained business and we have been able to retain all of the customers. And that is also something we could see during the down period between 2023 and 2025; we were continuously gaining more part numbers. We are seeing more customers, but the customers in the down period were buying 80 pieces instead of 100 pieces. And what we are seeing now is the pickup. When the market comes back, those same customers are now ramping up their orders from 80 to maybe not only 100, but 110. So I think we have a very good track record of keeping customers. You can always lose individual projects. It is still a competitive bidding process for individual parts.
Churn tends to be low single digits.
Thank you. To quickly discuss inventory levels among your customers and how you are preventing them from building too much inventory right now, given that prices are increasing quite rapidly.
This is a challenging topic. Generally, you have one advantage regarding PCBs, and that is that PCBs themselves are not something you want to build a huge stock of because you need to solder on components later on, and you always risk poor yield in your manufacturing if you have oxidation. But there is still a risk that, right now, not only are customers ordering for their immediate need, but actually overordering a little bit. We have been trying to track that, but we are still in an early phase to understand to what extent there is potentially a buildup of orders. We don't have clear signs that that is happening, but we can't rule it out either.
Thank you. And also on price, can you discuss how accepting customers are of rapid price increases right now.
I'd say the acceptance is 100% there. I think it has moved from it being very much. We don't accept pricing to saying, I don't care about pricing, but I won't accept it if you don't deliver to me. And I think that's what has been the case. I mean, we are even in a situation where we are faced with dealing with dynamic pricing. So the customers who have placed long forward orders, yes, they have a price indication, but since the factories do not have all their raw materials in stock to produce six months out from now, at some point, if the prices of the raw materials have changed materially, the prices will be adjusted. And that is something that our customers are fully aware of and are accepting.
Thank you.
Thank you. One more question in the back.
Thank you for the presentations. I had a question on the strategy. When you do this type of strategy, you work. You tend to focus on these are the areas that we want to focus on going forward. But at the same time, you also tend to talk about what things we should stop doing in order to release capacity to the focus areas that we would like to prioritize. So it would be interesting to see if you have identified any of those "stop doing" areas.
I think we constantly try to work on our efficiency in how we sell, and I think we could see that in all businesses. If you try to do a full analysis of your customer portfolio and which customers we are visiting and spending time with, I think we have seen areas where we can constantly improve, specifically within certain customer categories where we spend a lot of time, but where the potential reward over time is not as great as it should be. And I think that is something we have been actively working on to identify certain customers with whom we probably should not be working. They keep us busy, but that time we would rather spend somewhere else. So that is something we are doing constantly. And when we are doing that change, we try to then be more clear on what parts of the market we see the greatest return on our investments? Where is the highest demand, and where can we really differentiate? And that is how we try to redirect our resources.
All right. Thank you. Maybe another question then. If you are to succeed with this strategy, or if you look throughout the next five years, what will be the greatest changes in your company profile?
I think for us, when we look upon the growth over the near-term horizon, clearly we have a strong position in Europe and North America. I think most of our growth is going to be continuing our growth in the Nordics and Europe and then growing our share in North America. But at the same time, if we look beyond the five years for us, the activity that we are doing right now with Australia and the other activities we do in the East segment are very important for our long-term growth. And that is why we are also saying not only looking at where we get the revenue in the next three to five years, but how do we build the sustainable growth beyond that? And that is why we are making a lot of strategic investments to grow our East segment. Because if you saw in one of those market charts, 60% of the world market, even HMLV, is outside Europe and North America, and we are taking constant, controllable steps to open up our possibilities to grow in those regions.
Okay. Thank you very much.
I don't think we have any more questions. So I would like to thank you all for coming, for listening and watching, and for asking very good questions. So thank you all for attending. Thank you.
Thank you very.
Much. Thank you.



















